Ergonomic Design and Evaluation of a Pilot Oxygen Mask

The present study developed a virtual fit assessment (VFA) method to design an oxygen mask which fits Korean Air Force (KAF) pilots. The VFA method used 3D face scan data of 336 KAF pilots to find the most proper shape of an oxygen mask for KAF pilots. The oxygen mask design revised in the study showed a 27% design improvement effect on average in terms of fit evaluated by the VFA method. Additionally, the present study evaluated the revised oxygen mask prototypes with 88 KAF pilots to experimentally verify the design improvement effect in terms of discomfort, pressure, and suitability for military equipment (slippage and stability in flight-like situations). The discomfort of the revised mask was 33 ~ 56% lower on average than the existing oxygen mask. In terms of the pressure, the revised mask showed 11 ~ 33% of improvement on average compared to the existing mask. Furthermore, on high gravity situation, the slippage distance of the revised mask was 24% shorter on average than the existing mask. The proposed VFA method can be applied to the design and evaluation of wearable products that require an ergonomically better fit for a target population.

[1]  K Willeke,et al.  Quantitative fit testing techniques and regulations for tight-fitting respirators: current methods measuring aerosol or air leakage, and new developments. , 1997, American Industrial Hygiene Association journal.

[2]  Jingzhou Yang,et al.  Sensitivity analysis of important parameters affecting contact pressure between a respirator and a headform , 2011 .

[3]  W. Marsden.  I and J , 2012 .

[4]  Don-Hee Han,et al.  Development of prototypes of half-mask facepieces for Koreans using the 3D digitizing design method: a pilot study. , 2004, The Annals of occupational hygiene.

[5]  Heecheon You,et al.  Analysis of the facial measurements of Korean Air Force pilots for oxygen mask design , 2013, Ergonomics.

[6]  E S Kolesar,et al.  Comparison of respirator protection factors measured by two quantitative fit test methods. , 1982, Aviation, space, and environmental medicine.

[7]  Robert B Lawrence,et al.  Comparison of five methods for fit-testing N95 filtering-facepiece respirators. , 2002, Applied occupational and environmental hygiene.

[8]  Heecheon You,et al.  Ergonomic Design and Evaluation of a Pilot Oxygen Mask for Korea Air Force Pilots , 2014 .

[9]  K G Yatapanage,et al.  Measurement of 3-D facial contours for the design of half-face respirators. , 1992, American Industrial Hygiene Association journal.

[10]  Young W. Song,et al.  Half-Mask Interface Prototype Design using Korean Face Anthropometric Data , 2010 .

[11]  Kolesar Es,et al.  Comparison of respirator protection factors measured by two quantitative fit test methods. , 1982 .

[12]  Heecheon You,et al.  Analysis of the Facial Anthropometric Data of Korean Pilots for Oxygen Mask Design , 2012 .

[13]  Ziqing Zhuang,et al.  Headform and N95 Filtering Facepiece Respirator Interaction: Contact Pressure Simulation and Validation , 2012, Journal of occupational and environmental hygiene.

[14]  Don-Hee Han,et al.  Facial dimensions and predictors of fit for half-mask respirators in Koreans. , 2003, AIHA journal : a journal for the science of occupational and environmental health and safety.