Crack growth simulation in heterogeneous material by S-FEM and comparison with experiments

Abstract A fully automatic fatigue crack growth simulation system is developed using S-version FEM. This system is extended to fractures in heterogeneous materials. In a heterogeneous material, the crack tip stress field becomes mixed-mode (the crack growth path is affected by inhomogeneous materials and mixed-mode conditions). The stress intensity factors in a mixed-mode condition are evaluated using the virtual crack closure method. The criteria for the crack growth amount and crack growth path are based on these stress intensity factors, and the crack growth configurations are obtained. Three crack growth problems are simulated. One is crack growth in a bi-material made of CFRP plate and aluminum alloy. The crack growth paths are compared with the experimental results. The second problem is crack growth in a bi-material made of PMMA and aluminum alloy. By changing the loading condition, several cases are simulated and compared with the experimental results. In the experiment, the crack grows into and along the phase boundary. The effect of the phase boundary is discussed. The last case is crack growth along interface of CFRP plate.

[1]  Masaki Hojo,et al.  Evaluation of interfacial strength in CF/epoxies using FEM and in-situ experiments , 2006 .

[2]  M. Kanninen,et al.  A finite element calculation of stress intensity factors by a modified crack closure integral , 1977 .

[3]  Ozcan Konur,et al.  Effect of the properties of the constituents on the fatigue performance of composites: a review , 1989 .

[4]  Yoshitaka Wada,et al.  Crack growth analysis in a weld-heat-affected zone using S-version FEM , 2012 .

[5]  Jacob Fish,et al.  On adaptive multilevel superposition of finite element meshes for linear elastostatics , 1994 .

[6]  Yoshitaka Wada,et al.  Fatigue crack growth simulation in heterogeneous material using s-version FEM , 2014 .

[7]  C. M. Lawrence Wu.  Thermal and mechanical fatigue analysis of CFRP laminates , 1993 .

[8]  Sridhar Krishnaswamy,et al.  Quasi-Static Propagation of Subinterfacial Cracks , 2000 .

[9]  P. C. Paris,et al.  A Critical Analysis of Crack Propagation Laws , 1963 .

[10]  M. Kawai,et al.  Effects of matrix ductility and progressive damage on fatigue strengths of unnotched and notched carbon fibre plain woven roving fabric laminates , 1996 .

[11]  Yoshitaka Wada,et al.  Fatigue Crack Growth Simulation Using S-Version FEM , 2008 .

[12]  Yoshitaka Wada,et al.  Interaction Effect Analysis of Two Surface Cracks Using S-Version FEM , 2009 .

[13]  T. Belytschko,et al.  Element‐free Galerkin methods , 1994 .

[14]  Ted Belytschko,et al.  Elastic crack growth in finite elements with minimal remeshing , 1999 .

[15]  Masanori Kikuchi,et al.  On fracture analysis using an element overlay technique , 2005 .

[16]  Yoshitaka Wada,et al.  Closure Effect on Interaction of Two Surface Cracks Under Cyclic Bending , 2010 .