Laser-induced hard tissue ablation by assisted with a liquid film on target tissue surface

The objective of this study was to investigate the influence of an applied water film on bone hard tissue ablation by pulse CO2 laser. Fresh bovine shank bone in vitro used in the experiment were put on a PC-controlled motorized linear drive stage and moved repeatedly through focused beam of laser without and with a water film of 0.4 mm and 1 mm on target tissue. The wavelength of pulse CO2 laser was 10.64 μm, pulse repetition rate was 60 Hz, the energy density was 18-84 J/cm2 and the beam diameter of about 400 μm. The moving speed of stage was 12 mm/s, scanning times was 5. The surface morphology and microstructure of ablation grooves were examined by stereomicroscope and scanning electron microscope (SEM) respectively. The geometry of the groove was measured with optical coherence tomography (OCT), and the thermal injury was examined by histology. It shows that water film on the target tissue surface plays an important role during the ablation process. A proper thickness of water film applied to target tissue surface could improve the regular of cut shape, smooth the cut surface, produce the same or even larger ablation rate and efficiency, and reduce the thermal injury around the groove by compared with dry ablation condition. Moreover, the addition of water could alter the microstructure of bone sample.

[1]  Christian Apel,et al.  Influence of the water content in dental enamel and dentin on ablation with erbium YAG and erbium YSGG lasers. , 2006, Journal of biomedical optics.

[2]  S. Weiner,et al.  Insights into whole bone and tooth function using optical metrology , 2007 .

[3]  P. Hering,et al.  Laser Osteotomy with Pulsed CO 2 Lasers , 2007 .

[4]  Vasan Venugopalan,et al.  Mid‐IR laser ablation of articular and fibro‐cartilage:A wavelength dependence study of thermal injury and crater morphology , 2006, Lasers in surgery and medicine.

[5]  R. Poprawe,et al.  Visualising the procedures in the influence of water on the ablation of dental hard tissue with erbium:yttrium–aluminium–garnet and erbium, chromium:yttrium–scandium–gallium-garnet laser pulses , 2009, Lasers in Medical Science.

[6]  N. Gutknecht,et al.  Influence of water-layer thickness on Er:YAG laser ablation of enamel of bovine anterior teeth , 2008, Lasers in Medical Science.

[7]  Jong-In Youn,et al.  A comparison of mass removal, thermal injury, and crater morphology of cortical bone ablation using wavelengths 2.79, 2.9, 6.1, and 6.45 µm , 2007, Lasers in surgery and medicine.

[8]  Martin Frenz,et al.  Bone-ablation mechanism using CO2 lasers of different pulse duration and wavelength , 1993 .

[9]  Raimund Hibst,et al.  Effects of water spray and repetition rate on the temperature elevation during Er:YAG laser ablation of dentine , 1996, European Conference on Biomedical Optics.

[10]  A J Welch,et al.  Hard tissue ablation with a spray-assisted mid-IR laser , 2007, Physics in medicine and biology.

[11]  D. Fried,et al.  Influence of an optically thick water layer on the bond‐strength of composite resin to dental enamel after IR laser ablation , 2003, Lasers in surgery and medicine.

[12]  J. D. PÉcora,et al.  Water flow on erbium:yttrium–aluminum–garnet laser irradiation: effects on dental tissues , 2009, Lasers in Medical Science.

[13]  Peter Hering,et al.  In vivo animal trials with a scanning CO2 laser osteotome , 2005, Lasers in surgery and medicine.

[14]  Daniel Fried,et al.  Mechanism of water augmentation during IR laser ablation of dental enamel , 2002, Lasers in surgery and medicine.

[15]  Boris Majaron,et al.  Fiber-tip drilling of hard dental tissues with Er:YAG laser , 1998, Photonics West - Biomedical Optics.

[16]  J. Featherstone,et al.  Dissolution studies of bovine dental enamel surfaces modified by high‐speed scanning ablation with a λ = 9.3‐µm TEA CO2 laser , 2006, Lasers in surgery and medicine.

[17]  Matthias Frentzen,et al.  Osteotomy with 80-μs CO2 laser pulses – histological results , 2003, Lasers in Medical Science.

[18]  Peter Hering,et al.  Ablation of hard bone tissue with pulsed CO2 lasers , 2005 .