Dynamic analysis of flexible parallel robots via enhanced co-rotational and rigid finite element formulations

Abstract The aim of this paper is to develop formulations for the dynamic analysis of parallel robots considering the links flexibility. These formulations are based on two popular methods which are used frequently in the literature, the Co-rotational and Rigid finite elements. In the first part of this study, the co-rotational elements are incorporated to model the flexible links. Unlike the common co-rotational formulations presented in the literature, the deformation of each element is described directly in its co-rotated frame without the need of expressing any intricate kinematic relations. In the second part, a formulation based on the rigid finite element method is elaborated. The formulation simplifies the form and derivation of kinetic energy of a flexible link, with respect to the co-rotational elements, at the cost of assuming the elements to be rigid. Choosing the Delta parallel robot as a case study, the two aforementioned formulations are implemented and evaluated. The numerical simulations show that, for the same number of nodes, the results differed by 6% in the worst case. However, in terms of computational cost, the rigid finite element formulation always reduces the simulation time by 31%–46%.

[1]  Yong-Lin Kuo,et al.  Mathematical modeling and analysis of the Delta robot with flexible links , 2016, Comput. Math. Appl..

[2]  James K. Mills,et al.  Dynamic Modeling and Experimental Validation of a 3-PRR Parallel Manipulator with Flexible Intermediate Links , 2007, J. Intell. Robotic Syst..

[3]  Ping Ren,et al.  Dynamics and Vibration Analysis of Delta Robot , 2015 .

[4]  H. Elkaranshawy,et al.  Corotational finite element analysis of planar flexible multibody systems , 1995 .

[5]  R. Y. Yakoub,et al.  Three Dimensional Absolute Nodal Coordinate Formulation for Beam Elements: Theory , 2001 .

[6]  T. Belytschko,et al.  A first course in finite elements , 2007 .

[7]  K. Hsiao,et al.  A consistent co-rotational finite element formulation for geometrically nonlinear dynamic analysis of 3-D beams , 1999 .

[8]  Javad Enferadi,et al.  Accuracy and stiffness analysis of a 3-RRP spherical parallel manipulator , 2011, Robotica.

[9]  J. Gerstmayr.  Strain Tensors in the Absolute Nodal Coordinate and the Floating Frame of Reference Formulation , 2003 .

[10]  Xianmin Zhang,et al.  Dynamic analysis of planar 3-RRR flexible parallel robot , 2012, 2012 IEEE International Conference on Robotics and Biomimetics (ROBIO).

[11]  Nadia Cretescu,et al.  Rigid versus Flexible Link Dynamic Analysis of a 3DOF Delta Type Parallel Manipulator , 2015 .

[12]  James D. Lee,et al.  A dynamic model of a flexible stewart platform , 1993 .

[13]  Chen Ji,et al.  An efficient dynamic modelling approach for high-speed planar parallel manipulator with flexible links , 2015 .

[14]  Carlos A. Felippa,et al.  A unified formulation of small-strain corotational finite elements: I. Theory , 2005 .

[15]  Yimin Song,et al.  Rigid-flexible coupling dynamic modeling and investigation of a redundantly actuated parallel manipulator with multiple actuation modes , 2017 .

[16]  Ahmed A. Shabana,et al.  Flexible Multibody Dynamics: Review of Past and Recent Developments , 1997 .

[17]  Xianmin Zhang,et al.  Dynamic analysis of a 3-RRR parallel mechanism with multiple clearance joints , 2014 .

[18]  R. K. Livesley,et al.  Matrix Methods of Structural Analysis , 1964 .

[19]  Lawrence F. Shampine,et al.  An efficient Runge-Kutta (4,5) pair , 1996 .

[20]  Ke Wang,et al.  Dynamic analysis and optimization design of a planar slider–crank mechanism with flexible components and two clearance joints , 2016 .

[21]  M. Hjiaj,et al.  A consistent 3D corotational beam element for nonlinear dynamic analysis of flexible structures , 2014 .

[22]  Xianmin Zhang,et al.  Dynamic analysis of planar 3-RRR flexible parallel robots under uniform temperature change , 2015 .

[23]  Jorge Angeles,et al.  Dynamics of a 3-DOF spatial parallel manipulator with flexible links , 1995, Proceedings of 1995 IEEE International Conference on Robotics and Automation.

[24]  A. Shabana,et al.  Equivalence of the floating frame of reference approach and finite element formulations , 1998 .

[25]  Walied I. Hussien,et al.  A Corotational Formulation Based on Hamilton’s Principle for Geometrically Nonlinear Thin and Thick Planar Beams and Frames , 2018, Mathematical Problems in Engineering.

[26]  A Corotational Finite Element Method Combined with Floating Frame Method for Large Steady-State Deformation and Free Vibration Analysis of a Rotating-Inclined Beam , 2011 .

[27]  Johannes Gerstmayr,et al.  A Detailed Comparison of the Absolute Nodal Coordinate and the Floating Frame of Reference Formulation in Deformable Multibody Systems , 2009 .

[28]  E. Wittbrodt,et al.  Dynamics of Flexible Multibody Systems: Rigid Finite Element Method , 2006 .

[29]  Peter Eberhard,et al.  DYNAMIC ANALYSIS OF FLEXIBLE MANIPULATORS, A LITERATURE REVIEW , 2006 .

[30]  Johannes Gerstmayr,et al.  On the Accuracy and Computational Costs of the Absolute Nodal Coordinate and the Floating Frame of Reference Formulation in Deformable Multibody Systems , 2007 .

[31]  A. Shabana,et al.  Definition of the Elastic Forces in the Finite-Element Absolute Nodal Coordinate Formulation and the Floating Frame of Reference Formulation , 2001 .

[32]  William L. Cleghorn,et al.  Coupling characteristics of rigid body motion and elastic deformation of a 3-PRR parallel manipulator with flexible links , 2009 .

[33]  J. N. Reddy,et al.  A corotational finite element formulation for the analysis of planar beams , 2005 .

[34]  T. Belytschko,et al.  Applications of higher order corotational stretch theories to nonlinear finite element analysis , 1979 .

[35]  Liping Wang,et al.  Running accuracy analysis of a 3-RRR parallel kinematic machine considering the deformations of the links , 2014 .

[36]  Qingbo Liu,et al.  Dynamic modeling and analysis of 3-RRS parallel manipulator with flexible links , 2010 .

[37]  Ahmed A. Shabana,et al.  Dynamics of Multibody Systems , 2020 .

[38]  Xingjian Dong,et al.  Dynamics analysis and characteristics of the 8-PSS flexible redundant parallel manipulator , 2011 .

[39]  Ahmed A. Shabana,et al.  Use of the floating frame of reference formulation in large deformation analysis: Experimental and numerical validation , 2010 .

[40]  Fumio Fujii,et al.  An explicit algorithm for geometrically nonlinear transient analysis of spatial beams using a corotational total Lagrangian finite element formulation , 2018 .

[41]  G. R. Heppler,et al.  A Deformation Field for Euler–Bernoulli Beams with Applications to Flexible Multibody Dynamics , 2001 .

[42]  Jorge Angeles,et al.  Elastodynamics of a two-limb Schönflies motion generator , 2015 .

[43]  Ettore Pennestrì,et al.  An application of the Udwadia-Kalaba dynamic formulation to flexible multibody systems , 2010, J. Frankl. Inst..

[44]  K. Hsiao,et al.  A buckling and postbuckling analysis of axially loaded thin-walled beams with point-symmetric open section using corotational finite element formulation , 2018 .

[45]  Chris K. Mechefske,et al.  Modeling of a Fully Flexible 3PRS Manipulator for Vibration Analysis , 2006 .

[46]  Alessandro Cammarata,et al.  On the Elastostatics of Spherical Parallel Machines with Curved Links , 2015 .

[47]  Min Xiu Kong,et al.  Modal Analysis of High-Speed Parallel Manipulator with Flexible Links , 2016 .

[48]  Saeed Ebrahimi,et al.  A comparative study of elastic motions in trajectory tracking of flexible RPR planar manipulators moving with high speed , 2017, Robotica.

[49]  Saeed Ebrahimi,et al.  Dynamic Performance Evaluation of Serial and Parallel RPR Manipulators with Flexible Intermediate Links , 2016 .

[50]  H Sugiyama,et al.  Finite element analysis of the geometric stiffening effect. Part 1: A correction in the floating frame of reference formulation , 2005 .