Fatigue assessment for the floating collar of a fish cage using the deterministic method in waves

Abstract Fish farms have moved into the open sea in recent years and the failure risk of fish cages has increased in the harsher environmental conditions. Fatigue failure is an important limit state for the floating system of the fish cage under the long-term action of waves. A fatigue analysis of the high-density polyethylene (HDPE) floating system in waves is presented in this study based on the deterministic method and finite element analysis combined with a hydrodynamic model. As the basis of the fatigue assessment, a stress analysis of the floating pipes is first performed based on the joint use of the finite element model and the hydrodynamic model. The fatigue lifetime is then calculated using the Palmgren – Miner cumulative damage theory together with the deterministic method in which the stochastic sea state is decomposed into a reasonably high number of individual wave scatter diagrams. The results show that the recommended replacement period of the HDPE floating pipes is 20 years and that the fatigue lifetime of the floating pipes is more sensitive to the wave period than to the wave height. In addition, the effects of mooring line arrangements, wave incident angle and typhoons are also investigated. Comparisons of the fatigue lifetimes of the floating pipes for different mooring line arrangements indicate that the fatigue lifetime increases dramatically with increasing number of mooring lines. For a symmetrically arranged four-point mooring fish cage, the most unfavourable wave loading angle is 45°. Typhoons lead to a significant decrease in the fatigue lifetime of the floating pipes despite the short durations of the typhoons.

[1]  Odd M. Faltinsen,et al.  Experimental and numerical study of an aquaculture net cage with floater in waves and current , 2015 .

[2]  M. R. Swift,et al.  Finite Element Modeling of Submerged Aquaculture Net-pen Systems , 1997 .

[3]  Y. Nadot,et al.  Multiaxial fatigue criterion for a high‐density polyethylene thermoplastic , 2010 .

[4]  Yun-Peng Zhao,et al.  Fatigue analysis of mooring system for net cage under random loads , 2014 .

[5]  Taeho Kim,et al.  Automatic submerging and surfacing performances of model submersible fish cage system operated by air control , 2011 .

[6]  C. Brebbia,et al.  Dynamic analysis of offshore structures , 1979 .

[7]  Yun-Peng Zhao,et al.  Numerical analysis of the elastic response of a floating collar in waves , 2015 .

[8]  Bernt J. Leira,et al.  Design theory in offshore fish cage designing , 2013 .

[9]  G. Dong,et al.  Hydrodynamic analysis of elastic floating collars in random waves , 2015 .

[10]  Chai-Cheng Huang,et al.  Mooring line fatigue: a risk analysis for an SPM cage system. , 2010 .

[11]  A. Moet,et al.  The effects of annealing on fatigue crack propagation in polyethylene , 1995 .

[12]  K. Chaoui,et al.  Statistical analysis of HDPE fatigue lifetime , 2008 .

[13]  David W. Fredriksson,et al.  Open ocean aquaculture engineering : Numerical modeling , 2000 .

[14]  Wolfgang Fricke.  Recommended Hot-Spot Analysis Procedure For Structural Details of Ships And FPSOs Based On Round-Robin FE Analyses , 2002 .

[15]  Bin Teng,et al.  Hydrodynamic behavior of a straight floating pipe under wave conditions , 2007 .

[16]  Bin Teng,et al.  Numerical simulation of the hydrodynamic behaviour of submerged plane nets in current , 2006 .

[17]  Odd Sture Hopperstad,et al.  Structural analysis of aquaculture net cages in current , 2010 .

[18]  G. Dong,et al.  A numerical analysis on the hydrodynamic characteristics of net cages using coupled fluid–structure interaction model , 2014 .

[19]  Annette M. Harte,et al.  Characterizing the Wave Environment in the Fatigue Analysis of Flexible Risers , 2006 .

[20]  Bin Teng,et al.  A numerical study on dynamic properties of the gravity cage in combined wave-current flow , 2007 .

[21]  James D. Irish,et al.  Fish cage and mooring system dynamics using physical and numerical models with field measurements , 2003 .

[22]  Limin Sun,et al.  Study on the Mechanical Properties of Stay Cable HDPE Sheathing Fatigue in Dynamic Bridge Environments , 2015 .

[23]  L. Stien,et al.  Environmental drivers of Atlantic salmon behaviour in sea-cages: A review , 2011 .

[24]  M. Niinomi,et al.  Fatigue characteristics of ultra high molecular weight polyethylene with different molecular weight for implant material , 2001, Journal of materials science. Materials in medicine.

[25]  David W. Fredriksson,et al.  Field measurements of cage deformation using acoustic sensors , 2013 .

[26]  M. Wolcott,et al.  Flexural Fatigue and Reliability Analysis of Wood Flour/High-density Polyethylene Composites , 2010 .

[27]  Igor Tsukrov,et al.  Development of structural modeling techniques for evaluating HDPE plastic net pens used in marine aquaculture , 2007 .

[28]  David W. Fredriksson,et al.  Finite element modeling of net panels using a consistent net element , 2003 .

[29]  Bernt J. Leira,et al.  Investigation of a self-submersible SPM cage system in random waves , 2014 .

[30]  Jeanette González,et al.  Fatigue Analysis of PE-100 Pipe Under Axial Loading , 2011 .

[31]  Odd M. Faltinsen,et al.  Modelling of current loads on aquaculture net cages , 2012 .

[32]  Paul E. Thomassen,et al.  Assessment of Fatigue Damage of Floating Fish Cages Due to Wave Induced Response , 2012 .

[33]  Pål Lader,et al.  Dynamic properties of a flexible net sheet in waves and current—A numerical approach , 2006 .

[34]  I. Lotsberg,et al.  Developments In Fatigue Design Standards For Offshore Structures , 2001 .

[35]  Igor Tsukrov,et al.  Comparative study of two approaches to model the offshore fish cages , 2015 .

[36]  Li Li,et al.  Dynamic responses of floating fish cage in waves and current , 2013 .

[37]  Yngvar Olsen,et al.  Status and Future Perspectives of Marine Aquaculture , 2008 .