Hybrid Laser-arc Welding of 17-4 PH Martensitic Stainless Steel

[1]  R. Kovacevic,et al.  Hybrid laser-arc welding of advanced high-strength steel , 2014 .

[2]  Xibing Gong,et al.  Beam speed effects on Ti–6Al–4V microstructures in electron beam additive manufacturing , 2014 .

[3]  K. Shinozaki,et al.  The effect of welding conditions on solidification cracking susceptibility of type 310S stainless steel during laser welding using an in-situ observation technique , 2013, Welding in the World.

[4]  Xibing Gong,et al.  Review on powder-based electron beam additive manufacturing technology , 2012 .

[5]  A. Davoodi,et al.  Post-weld heat treatment influence on galvanic corrosion of GTAW of 17-4PH stainless steel in 3·5%NaCl , 2011 .

[6]  U. Reisgen,et al.  Shielding gas influences on laser weldability of tailored blanks of advanced automotive steels , 2010 .

[7]  S. Katayama,et al.  High quality welding of stainless steel with 10 kW high power fibre laser , 2009 .

[8]  D. Petring,et al.  Joining of thick section steels using hybrid laser welding , 2008 .

[9]  José Divo Bressan,et al.  Influence of hardness on the wear resistance of 17-4 PH stainless steel evaluated by the pin-on-disc testing , 2008 .

[10]  S. Katayama,et al.  Elucidation of high-power fibre laser welding phenomena of stainless steel and effect of factors on weld geometry , 2007 .

[11]  A. K. Bhaduri,et al.  Weldability of 17-4PH stainless steel in overaged heat treated condition , 2006 .

[12]  S. Katayama,et al.  Physical Phenomena and Porosity Prevention Mechanism in Laser-Arc Hybrid Welding , 2006 .

[13]  John C. Lippold,et al.  Welding Metallurgy and Weldability of Stainless Steels , 2005 .

[14]  J. Nowacki.  Weldability of 17-4 PH stainless steel in centrifugal compressor impeller applications , 2004 .

[15]  V. Kujanpää,et al.  Welding of thick austenitic stainless steel using Nd:yttrium-aluminum-garnet laser with filler wire and hybrid process , 2003 .

[16]  V. Shankar,et al.  Solidification cracking in austenitic stainless steel welds , 2003 .

[17]  S. Kou.  Solidification and liquation cracking issues in welding , 2003 .

[18]  Chih-Kuang Lin,et al.  Influence of high temperature exposure on the mechanical behavior and microstructure of 17-4 PH stainless steel , 2003 .

[19]  L. W. Tsay,et al.  Embrittlement of laser surface-annealed 17-4 PH stainless steel , 2001 .

[20]  Naoki Seto,et al.  High-speed simultaneous observation of plasma and keyhole behavior during high power CO2 laser welding: Effect of shielding gas on porosity formation , 2000 .

[21]  J. Brooks,et al.  Weld microstructure development and properties of precipitation-strengthened martensitic stainless steels , 1999 .

[22]  A. K. Bhaduri,et al.  Optimized postweld heat treatment procedures for 17-4 PH stainless steels , 1995 .

[23]  M. Baskes,et al.  Solidification modeling and solid-state transformations in high-energy density stainless steel welds , 1991 .

[24]  J. Lippold.  Centerline cracking in deep penetration electron beam welds in type 304L stainless steel , 1985 .

[25]  J. M. Vitek,et al.  Microstructural modification of austenitic stainless steels by rapid solidification , 1983 .

[26]  H. F. Reid,et al.  Cryogenic toughness of SMA austenitic stainless steel weld metals. II - Role of nitrogen , 1979 .

[27]  D. C. Martin,et al.  WELDING OF PRECIPITATION-HARDENING STAINLESS STEELS. , 1968 .

[28]  S. Steel.  Centerline Cracking in Deep Penetration Electron Beam Welds in Type 304 L Stainless Steel , 2013 .

[29]  H. McHenry.  Fracture Behavior of Ferrite-Free Stainless Steel Welds in Liquid Helium , 2013 .

[30]  D. J. Kotecki,et al.  WRC-1992 constitution diagram for stainless steel weld metals : a modification of the WRC-1988 diagram , 1992 .

[31]  J. KoteckiD,et al.  ステンレス鋼溶接金属のWRC‐1992状態図 WRC‐1988状態図の改訂 , 1992 .