Shape optimization of tibial prosthesis components

NASA technology and optimal design methodologies originally developed for the optimization of composite structures (engine blades) are adapted and applied to the optimization of orthopaedic knee implants. A method is developed enabling the shape tailoring of the tibial components of a total knee replacement implant for optimal interaction within the environment of the tibia. The shape of the implant components are optimized such that the stresses in the bone are favorably controlled to minimize bone degradation, to improve the mechanical integrity of the implant/interface/bone system, and to prevent failures of the implant components. A pilot tailoring system is developed and the feasibility of the concept is demonstrated and evaluated. The methodology and evolution of the existing aerospace technology from which this pilot optimization code was developed is also presented and discussed. Both symmetric and unsymmetric in-plane loading conditions are investigated. The results of the optimization process indicate a trend toward wider and tapered posts as well as thicker backing trays. Unique component geometries were obtained for the different load cases.

[1]  D. Davy,et al.  Shape optimization of tibial prosthesis components , 1993 .

[2]  Dimitris A. Saravanos,et al.  Multiobjective shape and material optimization of composite structures including damping , 1990 .

[3]  G S Beaupré,et al.  An approach for time‐dependent bone modeling and remodeling—theoretical development , 1990, Journal of orthopaedic research : official publication of the Orthopaedic Research Society.

[4]  D. Hoeltzel,et al.  Design optimization of a prosthesis stem reinforcing shell in total hip arthroplasty. , 1990, Journal of biomechanical engineering.

[5]  R Huiskes,et al.  Mathematical shape optimization of hip prosthesis design. , 1989, Journal of biomechanics.

[6]  Kenneth W. Brown,et al.  Structural Tailoring of Advanced Turboprops (STAT) , 1988 .

[7]  Hwj Rik Huiskes,et al.  Application of numerical shape optimization to artificial-joint design , 1988 .

[8]  D P Fyhrie,et al.  Trabecular bone density and loading history: regulation of connective tissue biology by mechanical energy. , 1987, Journal of biomechanics.

[9]  H. Grootenboer,et al.  Adaptive bone-remodeling theory applied to prosthetic-design analysis. , 1987, Journal of biomechanics.

[10]  R. Haftka,et al.  Structural shape optimization — a survey , 1986 .

[11]  G S Beaupré,et al.  Epiphyseal-based designs for tibial plateau components--I. Stress analysis in the frontal plane. , 1986, Journal of biomechanics.

[12]  R. T. Hart,et al.  Functional adaptation in long bones: establishing in vivo values for surface remodeling rate coefficients. , 1985, Journal of biomechanics.

[13]  D T Davy,et al.  A computational method for stress analysis of adaptive elastic materials with a view toward applications in strain-induced bone remodeling. , 1984, Journal of biomechanical engineering.

[14]  Garret N. Vanderplaats,et al.  A robust Feasible Directions algorithm for design synthesis , 1983 .

[15]  G. Smidt Biomechanical analysis of knee flexion and extension. , 1973, Journal of biomechanics.

[16]  J B Morrison,et al.  The mechanics of the knee joint in relation to normal walking. , 1970, Journal of biomechanics.