Manufacturing Optimization and Experimental Investigation of Ex-situ Core-shell Particles Toughened Carbon/Elium® Thermoplastic Composites
暂无分享,去创建一个
[1] Xiaoling Liu,et al. Ramie fabric Elium® composites with flame retardant coating: Flammability, smoke, viscoelastic and mechanical properties , 2020 .
[2] K. Leong,et al. Quasi-static indentation response of core-shell particle reinforced novel NCCF/Elium® composites at different feed rates , 2020 .
[3] Jinglei Yang,et al. Mechanical properties and failure modes of hybrid fiber reinforced polymer composites with a novel liquid thermoplastic resin, Elium® , 2019, Composites Part A: Applied Science and Manufacturing.
[4] M. Försth,et al. Flammability, Smoke, Mechanical Behaviours and Morphology of Flame Retarded Natural Fibre/Elium® Composite , 2019, Materials.
[5] S. Joshi,et al. Flexural characteristics of novel carbon methylmethacrylate composites , 2019, Composites Communications.
[6] S. Joshi,et al. Low-velocity impact response of carbon fibre composites with novel liquid Methylmethacrylate thermoplastic matrix , 2018, Composite Structures.
[7] B. K. Patle,et al. Stress, deflection, and frequency analysis of CNT reinforced graded sandwich plate under uniform and linear thermal environment: A finite element approach , 2018 .
[8] S. Joshi,et al. Mechanical and vibration response of insulated hybrid composites , 2018 .
[9] S. Joshi,et al. Mode I fracture toughness and fractographic investigation of carbon fibre composites with liquid Methylmethacrylate thermoplastic matrix , 2018 .
[10] Vishwesh Dikshit,et al. Multiscale Polymer Composites: A Review of the Interlaminar Fracture Toughness Improvement , 2017 .
[11] S. Joshi,et al. Optimizing Polymer Infusion Process for Thin Ply Textile Composites with Novel Matrix System , 2017, Materials.
[12] Pradip K. Saha,et al. Aerospace Manufacturing Processes , 2016 .
[13] Mohamed S. Gadala,et al. Rolling element bearing fault diagnostics using acoustic emission technique and advanced signal processing , 2016 .
[14] A. Mimaroğlu,et al. The Influence of Micro- and Nano-Filler Content on the Mechanical Properties of Epoxy Composites , 2015 .
[15] J. Tsai,et al. Characterizing vibration damping response of composite laminates containing silica nanoparticles and rubber particles , 2015 .
[16] Joël Cugnoni,et al. Thin ply composites: Experimental characterization and modeling of size-effects , 2014 .
[17] P. Viot,et al. Preparation and mechanical characterisation of laminate composites made of glass fibre/epoxy resin filled with tri bloc copolymers , 2014 .
[18] Lei Xie,et al. Simultaneous binding and ex situ toughening concept for textile reinforced pCBT composites: Influence of preforming binders on interlaminar fracture properties , 2013 .
[19] S. Joshi,et al. Damage evolution in glass/epoxy composites engineered using core–shell microparticles under impact loading , 2013, Journal of Materials Science.
[20] A. Kinloch,et al. The mechanical properties and toughening mechanisms of an epoxy polymer modified with polysiloxane-based core-shell particles , 2013 .
[21] T. Ogasawara,et al. Experimental characterization of strength and damage resistance properties of thin-ply carbon fiber/toughened epoxy laminates , 2008 .
[22] S. Tsai,et al. Experimental studies of thin-ply laminated composites , 2007 .
[23] Harald E.N. Bersee,et al. Reactive processing of textile fiber-reinforced thermoplastic composites – An overview , 2007 .
[24] Valentina Lopresto,et al. Effect of stitches on the impact behaviour of graphite/epoxy composites , 2006 .
[25] T. Lundström. The permeability of non-crimp stitched fabrics , 2000 .
[26] Tae Jin Kang,et al. Effect of Stitching on the Mechanical and Impact Properties of Woven Laminate Composite , 1994 .
[27] Barry T. Smith,et al. Compression Response of Thick Layer Composite Laminates with Through-the-Thickness Reinforcement , 1992 .
[28] K. Masania,et al. Toughening of epoxy using core–shell particles , 2011 .
[29] Y. Mai,et al. Failure mechanisms in toughened epoxy resins—A review , 1988 .