Effects of Al2O3 content on densification, microstructure, mechanical properties and oxidation resistance of TaC-Al2O3 composites

[1]  Yujin Wang,et al.  Effects of Al addition on densification, microstructure and mechanical properties of TaC-Al ceramics , 2018, Journal of Alloys and Compounds.

[2]  Yuhong Chen,et al.  The equilibria of Ta-W-Al-Si-O system at 1200 °C , 2018 .

[3]  M. G. Kakroudi,et al.  Fracture behavior improvement of TaC-based ceramic composites by fibrous structure , 2018 .

[4]  David C. Joy,et al.  Scanning Electron Microscopy and X-Ray Microanalysis , 2017 .

[5]  Song Wang,et al.  Preparation of nanocrystalline ultra-high temperature Ta4ZrC5 ceramics by joint processes of solvothermal and carbothermal reaction , 2017 .

[6]  Yuhong Chen,et al.  Effects of adding 5–20 mol% ZrC plus 5 mol% Cu as a sintering aid on microstructure and mechanical properties of the TaC ceramics , 2016 .

[7]  S. Sugiyama,et al.  Preparation and characterization of tantalum carbide (TaC) ceramics , 2015 .

[8]  D. Sciti,et al.  Ablation tests on HfC- and TaC-based ceramics for aeropropulsive applications , 2015 .

[9]  Yu Zhou,et al.  Densification of tantalum carbide ceramics with 5 mol.% Al, Cu, Ag and Au , 2013 .

[10]  G. Thompson,et al.  Thermo-mechanical testing of tantalum carbides using a Lorentz-force, non-contact technique , 2013 .

[11]  K. Vanmeensel,et al.  Experimental study and simulation of plastic deformation of zirconia-based ceramics in a pulsed electric current apparatus , 2013 .

[12]  Yu Zhou,et al.  Microstructure and mechanical properties of the spark plasma sintered TaC/SiC composites: Effects of sintering temperatures , 2012 .

[13]  D. Sciti,et al.  Transmission electron microscopy on Hf- and Ta-carbides sintered with TaSi2 , 2011 .

[14]  J. Zaykoski,et al.  Synthesis, Processing, and Properties of TaC-TaB2-C Ceramics , 2010 .

[15]  Guo‐Jun Zhang,et al.  Pressureless Sintering of Tantalum Carbide Ceramics without Additives , 2010 .

[16]  Jianguo Deng,et al.  First-principles analysis of the adsorption of aluminum and chromium atoms on the HfC (0 0 1) surface , 2010 .

[17]  K. Woo,et al.  Mechanical properties and rapid consolidation of binderless nanostructured tantalum carbide , 2009 .

[18]  G. Hilmas,et al.  Densification and mechanical properties of TaC-based ceramics , 2009 .

[19]  G. Hilmas,et al.  Densification, Mechanical Properties, and Oxidation Resistance of TaC–TaB2 Ceramics , 2008 .

[20]  Raffaele Savino,et al.  Arc-jet testing on HfB2 and HfC-based ultra-high temperature ceramic materials , 2008 .

[21]  A. Kurlov,et al.  Atomic and vacancy ordering in carbide ζ-Ta4C3−x (0.28⩽x⩽0.40) and phase equilibria in the Ta–C system , 2007 .

[22]  K. Vanmeensel,et al.  The influence of percolation during pulsed electric current sintering of ZrO2-TiN powder compacts with varying TiN content , 2007 .

[23]  G. Hilmas,et al.  Hot pressing of tantalum carbide with and without sintering additives , 2007 .

[24]  J. Desmaison,et al.  Comparison of the oxidation behaviour of two dense hot isostatically pressed tantalum carbide (TaC and Ta2C) Materials , 1997 .

[25]  A. Deruyttere,et al.  Electrical conductivity of composites: a percolation approach , 1992 .

[26]  I-Wei Chen,et al.  Development of Superplastic Structural Ceramics , 1990 .

[27]  J. Jarrige,et al.  Sintering, oxidation and mechanical properties of hot pressed aluminium nitride , 1982 .

[28]  R. Roth,et al.  Effect of Oxide Additions on the Polymorphism of Tantalum Pentoxide: III. "Stabilization" of the Low Temperature Structure Type. , 1970, Journal of research of the National Bureau of Standards. Section A, Physics and chemistry.