Review of LIBS application in nuclear fusion technology

[1]  Hassan Yousefi Oderji,et al.  Evaluation of explosive sublimation as the mechanism of nanosecond laser ablation of tungsten under vacuum conditions , 2016 .

[2]  Xingwei Wu,et al.  Characterization of deuterium retention and co-deposition of fuel with lithium on the divertor tile of EAST using laser induced breakdown spectroscopy , 2015 .

[3]  Hongbin Ding,et al.  Effect of steady magnetic field on laser-induced breakdown spectroscopic characterization of EAST-like wall materials , 2015 .

[4]  V. Philipps,et al.  In-situ analysis of the first wall by laser-induced breakdown spectroscopy in the TEXTOR tokamak: Dependence on the magnetic field strength , 2015 .

[5]  J. Karhunen,et al.  LIBS analysis of tungsten coatings exposed to Magnum PSI ELM-like plasma , 2015 .

[6]  J. Karhunen,et al.  Applicability of LIBS for in situ monitoring of deposition and retention on the ITER-like wall of JET - Comparison to SIMS , 2015 .

[7]  Liying Sun,et al.  The Enhanced Effect of Optical Emission from Laser Induced Breakdown Spectroscopy of an Al-Li Alloy in the Presence of Magnetic Field Confinement , 2015 .

[8]  H. Ding 丁,et al.  Spatial Resolution Measurements of C, Si and Mo Using LIBS for Diagnostics of Plasma Facing Materials in a Fusion Device , 2015 .

[9]  Xingwei Wu,et al.  Study of deuterium retention on lithiated tungsten exposed to high-flux deuterium plasma using laser-induced breakdown spectroscopy , 2014 .

[10]  Ding Wu,et al.  Collinear double-pulse laser-induced breakdown spectroscopy as an in-situ diagnostic tool for wall composition in fusion devices , 2014 .

[11]  Xingwei Wu,et al.  In situ chemical imaging of lithiated tungsten using laser-induced breakdown spectroscopy , 2014 .

[12]  Zhe Wang,et al.  Laser-induced breakdown spectroscopy in China , 2013, Frontiers of Physics.

[13]  Xin Yu,et al.  Use of dual-pulse laser-induced breakdown spectroscopy for characterization of the laser cleaning of a first mirror exposed in HL-2A , 2014 .

[14]  Jari Likonen,et al.  Development of laser-induced breakdown spectroscopy for analyzing deposited layers in ITER , 2014 .

[15]  M. V. D. Berg,et al.  High heat flux capabilities of the Magnum-PSI linear plasma device , 2013 .

[16]  A. Popov,et al.  Development of Calibration-Free Laser-Induced-Breakdown-Spectroscopy based techniques for deposited layers diagnostics on ITER-like tiles , 2013 .

[17]  A. Semerok,et al.  LIBS for tokamak plasma facing components characterisation: Perspectives on in situ tritium cartography , 2013 .

[18]  Salvatore Almaviva,et al.  Development of laser-based techniques for in situ characterization of the first wall in ITER and future fusion devices , 2013 .

[19]  Hongbin Ding,et al.  Characterization of Li deposition on the first wall of EAST using laser-induced breakdown spectroscopy , 2013 .

[20]  J. Kozlova,et al.  Erosion of marker coatings exposed to Pilot-PSI plasma , 2013 .

[21]  Hassan Yousefi Oderji,et al.  Effect of background gases at reduced pressures on the laser treated surface morphology, spectral emission and characteristics parameters of laser produced Mo plasmas , 2013 .

[22]  Cong Li,et al.  Laser-induced breakdown spectroscopic characterization of tungsten plasma using the first, second, and third harmonics of an Nd:YAG laser , 2013 .

[23]  F. Colao,et al.  Laboratory feasibility study of fusion vessel inner wall chemical analysis by Laser Induced Breakdown Spectroscopy , 2012, CP 2012.

[24]  F. Colao,et al.  Remote-LIBS characterization of ITER-like plasma facing materials , 2012 .

[25]  V. Kotov,et al.  Study of the feasibility of applying laser-induced breakdown spectroscopy for in-situ characterization of deposited layers in fusion devices , 2011 .

[26]  Wolfgang Biel,et al.  Development of laser-based diagnostics for surface characterisation of wall components in fusion devices , 2011 .

[27]  V. Philipps,et al.  In situ characterisation of hydrocarbon layers in TEXTOR by laser induced ablation and laser induced breakdown spectroscopy , 2011 .

[28]  Christian Grisolia,et al.  Analysis of deposited layers on plasma facing components by laser-induced breakdown spectroscopy: Towards ITER tritium inventory diagnostics , 2011 .

[29]  Dc Daan Schram,et al.  Construction of the plasma-wall experiment Magnum-PSI , 2010 .

[30]  Christian Grisolia,et al.  Plume segregation observed in hydrogen and deuterium containing plasmas produced by laser ablation of carbon fiber tiles from a fusion reactor , 2010 .

[31]  M. Grothe,et al.  Overview of the Recent DiMES and MiMES Experiments in DIII-D , 2009 .

[32]  K. Krieger,et al.  Ion beam analysis of H and D retention in the near surface layers of JT-60U plasma facing wall tiles , 2007 .

[33]  Y. Hirohata,et al.  Hydrogen retention of JT-60 open divertor tiles exposed to HH discharges , 2006 .

[34]  Y. Gotoh,et al.  Hydrogen retention and depth profile in divertor tiles of Jt-60 exposed to hydrogen discharges , 2006 .

[35]  M. Nishikawa,et al.  Tritium release behavior from the graphite tiles used at the dome unit of the W-shaped divertor region in JT-60U , 2005 .

[36]  V. Rohde,et al.  Carbon Erosion and Deposition on the ASDEX Upgrade Divertor Tiles , 2005 .

[37]  Sakae Tanaka,et al.  Hydrogen isotope behavior in in-vessel components used for DD plasma operation of JT-60U by SIMS and XPS technique , 2003 .

[38]  P. Barabaschi,et al.  Key ITER plasma edge and plasma–material interaction issues , 2003 .

[39]  C. H. Skinner,et al.  Plasma-material interactions in current tokamaks and their implications for next step fusion reactors , 2001 .

[40]  P. Franzen,et al.  Similarities in divertor erosion/redeposition and deuterium retention patterns between the tokamaks ASDEX Upgrade, DIII-D and JET , 1999 .

[41]  A. Sagara,et al.  Properties of boron coatings used as plasma facing material of fusion device , 1994 .

[42]  E. Taglauer,et al.  Surface analysis in fusion devices , 1987 .