Estimation of ultrasonic guided wave mode conversion in a plate with thickness variation.

The hybrid boundary element method aimed at analyzing Lamb wave scattering from defects can provide us with an excellent numerical tool for tackling complicated mode conversion phenomena under waveguide thickness variation. In this paper, utilization of hybrid boundary element modeling for specific Lamb wave mode incidence situations with special energy distributions along the structural cross section is proposed for estimating reflection and transmission from various scatterers, such as a step discontinuity and tapered parts of a waveguide, etc. Interaction of individual Lamb wave modes with scatterers that represent arbitrary thickness variation along the direction of guided wave propagation is investigated by calculating the scattered fields for varying incident modes, frequency, and scatterer shape. The mode conversion phenomena through step discontinuity in a plate are also experimentally explored. The theoretical predictions of reflection and transmission by boundary element methods and the utility of dispersion curves are compared with experiments for specific modes. Results in this paper can be used to improve inspection sensitivity and penetration power for a variety of practical NDE applications, notably those in which thickness variation is found. In addition, the feasibility of inspecting sections located behind a waveguide thickness variation region and subsequent mode control will also be discussed.

[1]  J. Achenbach,et al.  Self-calibrating ultrasonic technique for crack depth measurement , 1992 .

[2]  B. R. Tittmann,et al.  A self-calibrating technique for the ultrasonic discrimination of solid-state welds , 1988 .

[3]  R. Langley,et al.  Elastic wave transmission through plate/beam junctions , 1990 .

[4]  I. A. Viktorov.  Rayleigh and Lamb Waves , 1967 .

[5]  L. Bond,et al.  Body to Rayleigh wave mode-conversion at steps and slots , 1987 .

[6]  M. Koshiba,et al.  Finite-Element Solution of Horizontally Polarized Shear Wave Scattering in an Elastic Plate , 1987, IEEE Transactions on Ultrasonics, Ferroelectrics and Frequency Control.

[7]  P. Cawley,et al.  The interaction of Lamb waves with defects , 1992, IEEE Transactions on Ultrasonics, Ferroelectrics and Frequency Control.

[8]  Joseph L. Rose,et al.  GUIDED WAVES IN A WATER LOADED HOLLOW CYLINDER , 1996 .

[9]  Joseph L. Rose,et al.  Ultrasonic guided wave inspection concepts for steam generator tubing , 1994 .

[10]  William D. O’Brien,et al.  Measurements of coupled Rayleigh wave propagation in an elastic plate , 1997 .

[11]  J. Achenbach.  Wave propagation in elastic solids , 1962 .

[12]  J. Rose,et al.  Effects of Discontinuities Cylindrical Tubes on a Transmitted Pulse in , 1975 .

[13]  Joseph L. Rose,et al.  An elastodynami`c hybrid boundary element study for elastic guided wave interactions with a surface breaking defect , 2000 .

[14]  Tribikram Kundu,et al.  Elastic wave scattering by cracks and inclusions in plates: in-plane case , 1992 .

[15]  Horace Lamb,et al.  On the Flexure of an Elastic Plate , 1889 .

[16]  Younho Cho,et al.  A boundary element solution for a mode conversion study on the edge reflection of Lamb waves , 1996 .

[17]  S. Rokhlin,et al.  Diffraction of Lamb waves by a finite crack in an elastic layer , 1980 .

[18]  J. Rose,et al.  Lamb wave scattering analysis for reflector characterization , 1997, IEEE Transactions on Ultrasonics, Ferroelectrics and Frequency Control.

[19]  I. A. Viktorov.  Rayleigh and Lamb Waves: Physical Theory and Applications , 1967 .

[20]  John G. Harris,et al.  Coupled Raleigh surface waves in slowly varying elastic waveguide , 1999, Proceedings of the Royal Society of London. Series A: Mathematical, Physical and Engineering Sciences.

[21]  Joseph L. Rose,et al.  Elastic-wave propagation in a joined cylindrical-conical-cylindrical shell , 1973 .

[22]  A. H. Shah,et al.  Scattering of lamb waves by a normal rectangular strip weldment , 1991 .