Designing parallel manipulators: from specifications to a real prototype

Purpose – The purpose of this paper is to present a step‐by‐step methodology for the design of parallel kinematic machines (PKMs), from the initial stages of the conceptual definition of a new machine to an optimum design fulfilling the complete set of design requirements.Design/methodology/approach – The methodology includes consideration of the kinematic, static and dynamic features required for the manipulator, which must all be assessed in complete industrial design. It is applied to a 4‐degrees‐of‐freedom (DOF) Schonflies motion generator for pick & place operations by way of example.Findings – The authors specify the key stages of a detailed design procedure for parallel manipulators.Originality/value – There are many publications on the development of specific robots and parallel manipulators based on their particular characteristics. However, it is relatively rare to find a paper on the general procedure with a step‐by‐step methodology applicable to any parallel manipulator.

[1]  Grigore Gogu.  Structural synthesis of parallel robots. , 2008 .

[2]  Philippe Poignet,et al.  Optimal Design of a 4-DOF Parallel Manipulator: From Academia to Industry , 2009, IEEE Transactions on Robotics.

[3]  J. Hervé.  Analyse structurelle des mcanismes par groupe des dplacements , 1978 .

[4]  Kok-Meng Lee,et al.  Dynamic analysis of a three-degrees-of-freedom in-parallel actuated manipulator , 1988, IEEE J. Robotics Autom..

[5]  E. Amezua,et al.  Obtaining configuration space and singularity maps for parallel manipulators , 2009 .

[6]  J. Merlet,et al.  Multi-criteria optimal design of parallel manipulators based on interval analysis , 2005 .

[7]  A. Hernández,et al.  Synthesis and Design of a Novel 3T1R Fully-Parallel Manipulator , 2008 .

[8]  By Grigore Gogu.  Structural Synthesis of Parallel Robots Part 1 : Methodology , 2013 .

[9]  Xianwen Kong,et al.  Type Synthesis of Parallel Mechanisms , 2010, Springer Tracts in Advanced Robotics.

[10]  Charles Pinto,et al.  Software Tool to Compute, Analyze and Visualize Workspaces of Parallel Kinematics Robots , 2011, Adv. Robotics.

[11]  Tsuneo Yoshikawa,et al.  Manipulability of Robotic Mechanisms , 1985 .

[12]  Oscar Altuzarra,et al.  Point-based Jacobian formulation for computational kinematics of manipulators , 2006 .

[13]  Jorge Angeles,et al.  Multiobjective Optimum Design of a Symmetric Parallel Schönflies-Motion Generator , 2009 .

[14]  Bhaskar Dasgupta,et al.  A Newton-Euler Formulation for the Inverse Dynamics of the Stewart Platform Manipulator , 1998 .

[15]  Jian Meng,et al.  Accuracy Analysis of Parallel Manipulators With Joint Clearance , 2009 .

[16]  Lihui Wang,et al.  Parallel Kinematic Machines: Design, Analysis and Simulation in an Integrated Virtual Environment , 2005 .

[17]  Clément Gosselin,et al.  A New Approach for the Dynamic Analysis of Parallel Manipulators , 1998 .

[18]  Oscar Altuzarra,et al.  Computational kinematics for robotic manipulators: instantaneous motion pattern , 2010 .

[19]  Jean-Pierre Merlet.  DEMOCRAT: A DEsign MethOdology for the Conception of Robots with parallel ArchiTecture , 1997, Robotica.

[20]  Charles Pinto,et al.  A practical procedure to analyze singular configurations in closed kinematic chains , 2004, IEEE Transactions on Robotics.

[21]  Alfonso Hernández,et al.  Position analysis of planar mechanisms with R-pairs using a geometrical–iterative method , 2004 .