Statistical issues in the fracture of brittle-matrix fibrous composites

Abstract This paper reviews recent work and presents new results on statistical aspects of the failure of composites consisting of brittle fibers aligned in a brittle matrix. The failure process involves quasi-periodic matrix cracking in planes perpendicular to the fiber, frictional sliding of the fibers in fiber break zones, and fiber bridging of cracks in a load-sharing framework that may vary from global to fairly local. First, we review the overall statistical features of the failure process, and identify certain issues in terms of critical geometric, statistical and mechanical parameters. This leads to two interesting cases, one where the spacing of matrix cracks is small relative to the length scale of load transfer in the fibers, and one where it is larger. Next we consider ‘characteristic’ bundles in the composite which capture essential features of the statistics of the failure process, and develop their distributions for strength in terms of certain characteristic stress and length scales. We then model the composite as a chain arrangement of such bundles both longitudinally and laterally, as the scale of load transfer among fibers in a bundle may be smaller than the full composite cross-section. This scale, though not precisely quantified, depends on such things as the stiffness of the matrix relative to the fibers, the volume fraction of the matrix and the spacing of periodic cracks. We then consider the strength distribution for the composite on the basis of the failure of the weakest characteristic bundle. We also consider issues related to fiber pull-out and the work of fracture as well as the possibility of severe strain localization especially within the bundle triggering overall failure. Substantial reductions in strength are predicted for smaller bundle sizes, but composite reliability is typically very high and the size effect very mild. Finally, we mention limited comparisons with Monte Carlo simulations and experimental results.

[1]  William A. Curtin,et al.  THE TOUGH TO BRITTLE TRANSITION IN BRITTLE MATRIX COMPOSITES , 1993 .

[2]  K. Knowles,et al.  The One‐Dimensional Car Parking Problem and Its Application to the Distribution of Spacings between Matrix Cracks in Unidirectional Fiber‐Reinforced Brittle Materials , 1992 .

[3]  S. Leigh Phoenix,et al.  The asymptotic strength distribution of a general fiber bundle , 1973, Advances in Applied Probability.

[4]  H. E. Daniels,et al.  The maximum of a Gaussian process whose mean path has a maximum, with an application to the strength of bundles of fibres , 1989, Advances in Applied Probability.

[5]  Rishi Raj,et al.  Overview no. 100 Scalings in fracture probabilities for a brittle matrix fiber composite , 1992 .

[6]  P. Steif,et al.  The tensile strength of a fiber-reinforced ceramic , 1991 .

[7]  K. Prewo.  Tension and flexural strength of silicon carbide fibre-reinforced glass ceramics , 1986 .

[8]  S. Phoenix,et al.  Interfacial shear strength studies using the single‐filament‐composite test. Part II: A probability model and Monte Carlo simulation , 1989 .

[9]  A. Evans,et al.  MECHANICAL-PROPERTIES OF CONTINUOUS-FIBER-REINFORCED CARBON MATRIX COMPOSITES AND RELATIONSHIPS TO CONSTITUENT PROPERTIES , 1992 .

[10]  M. Thouless,et al.  Tensile tests of ceramic-matrix composites. Theory and experiment , 1990 .

[11]  Bernard D. Coleman,et al.  On the strength of classical fibres and fibre bundles , 1958 .

[12]  William A. Curtin,et al.  Exact theory of fibre fragmentation in a single-filament composite , 1991 .

[13]  William A. Curtin,et al.  Fiber pull-out and strain localization in ceramic matrix composites , 1993 .

[14]  M. D. Thouless,et al.  Effects of pull-out on the mechanical properties of ceramic-matrix composites , 1988 .

[15]  William A. Curtin,et al.  THEORY OF MECHANICAL-PROPERTIES OF CERAMIC-MATRIX COMPOSITES , 1991 .

[16]  M. Sutcu,et al.  Weibull statistics applied to fiber failure in ceramic composites and work of fracture , 1989 .

[17]  W. Curtin.  Multiple matrix cracking in brittle matrix composites , 1993 .

[18]  H. Daniels.  The statistical theory of the strength of bundles of threads. I , 1945, Proceedings of the Royal Society of London. Series A. Mathematical and Physical Sciences.

[19]  S. L. Phoenix,et al.  Recursions and limit theorems for the strength and lifetime distributions of a fibrous composite , 1987, Journal of Applied Probability.

[20]  J. G. Keer,et al.  On the theoretical average crack spacing in brittle matrix composites containing continuous aligned fibres , 1982 .

[21]  P. Steif,et al.  A theory for the ultimate strength of a brittle-matrix composite , 1990 .

[22]  S. L. Phoenix,et al.  Weibull strength statistics for graphite fibres measured from the break progression in a model graphite/glass/epoxy microcomposite , 1991 .

[23]  O. Sbaizero,et al.  Effect of Interfaces on the Properties of Fiber‐Reinforced Ceramics , 1990 .

[24]  Richard L. Smith.  The Asymptotic Distribution of the Strength of a Series-Parallel System with Equal Load-Sharing , 1982 .

[25]  Anthony G. Evans,et al.  Overview no. 85 The mechanical behavior of ceramic matrix composites , 1989 .

[26]  Anthony G. Evans,et al.  The Mechanical Behavior of Ceramic Matrix Composites , 1989 .

[27]  J. Gurland,et al.  Comparison of the statistics of two fracture modes , 1962 .

[28]  W. Curtin,et al.  Ultimate strengths of fibre-reinforced ceramics and metals , 1993 .

[29]  S. L. Phoenix,et al.  Asymptotic Distributions for the Failure of Fibrous Materials Under Series-Parallel Structure and Equal Load-Sharing , 1981 .