Dynamic failure of 3D printed negative-stiffness meta-sandwich structures under repeated impact loadings

[1]  D. Shou,et al.  Lightweight meta-lattice sandwich panels for remarkable vibration mitigation: Analytical prediction, numerical analysis and experimental validations , 2022, Composites Part A: Applied Science and Manufacturing.

[2]  P. Gumbsch,et al.  Programmable gear-based mechanical metamaterials , 2022, Nature Materials.

[3]  D. Fang,et al.  Radar-stealth and load-bearing corrugated sandwich structures with superior environmental adaptability , 2022, Composites Science and Technology.

[4]  X. Tan,et al.  Continuous carbon fiber reinforced composite negative stiffness mechanical metamaterial for recoverable energy absorption , 2022, Composite Structures.

[5]  F. Narita,et al.  Multifunctional cellular sandwich structures with optimised core topologies for improved mechanical properties and energy harvesting performance , 2022, Composites Part B: Engineering.

[6]  X. Tan,et al.  Effect of beam configuration on its multistable and negative stiffness properties , 2022, Composite Structures.

[7]  Shutian Liu,et al.  A negative-stiffness based 1D metamaterial for bidirectional buffering and energy absorption with state recoverable characteristic , 2021, Thin-Walled Structures.

[8]  F. van Keulen,et al.  A novel design of multi-stable metastructures for energy dissipation , 2021, Materials & Design.

[9]  Lin-zhi Wu,et al.  Dynamic response of polyurethane foam and fiber orthogonal corrugated sandwich structure subjected to low-velocity impact , 2021, Composite Structures.

[10]  Xiaogang Guo,et al.  Metamaterials with a controllable thermal-mechanical stability: Mechanical designs, theoretical predictions and experimental demonstrations , 2021 .

[11]  Carlos J. García-Mora,et al.  Multistable inflatable origami structures at the metre scale , 2021, Nature.

[12]  Meiying Zhao,et al.  Broadband low-frequency vibration attenuation in 3D printed composite meta-lattice sandwich structures , 2021 .

[13]  Huan He,et al.  A novel 3D impact energy absorption structure with negative Poisson’s ratio and its application in aircraft crashworthiness , 2021 .

[14]  B. Wang,et al.  A novel bi-material negative stiffness metamaterial in sleeve-type via combining rigidity with softness , 2020 .

[15]  R. Tao,et al.  4D printed multi-stable metamaterials with mechanically tunable performance , 2020 .

[16]  Neil Gershenfeld,et al.  Discretely assembled mechanical metamaterials , 2020, Science Advances.

[17]  Yi Ding,et al.  Effects of cell size vs. cell-wall thickness gradients on compressive behavior of additively manufactured foams , 2020 .

[18]  A. Pandey,et al.  Flexural deformation behavior of carbon fiber reinforced aluminium hybrid foam sandwich structure , 2020 .

[19]  Lin-zhi Wu,et al.  A novel composite negative stiffness structure for recoverable trapping energy , 2020 .

[20]  Li Ma,et al.  Mechanical properties of 3D double-U auxetic structures , 2019 .

[21]  M. Plesha,et al.  Cubic negative stiffness lattice structure for energy absorption: Numerical and experimental studies , 2019 .

[22]  E. Li,et al.  In-plane crashworthiness of re-entrant hierarchical honeycombs with negative Poisson’s ratio , 2019, Composite Structures.

[23]  J. Xiong,et al.  Fabrication and mechanical behaviors of an all-composite sandwich structure with a hexagon honeycomb core based on the tailor-folding approach , 2019, Composites Science and Technology.

[24]  Yuguo Sun,et al.  Cushion performance of cylindrical negative stiffness structures: Analysis and optimization , 2019, Composite Structures.

[25]  Ling Zhu,et al.  Numerical study on mechanical behavior of foam core sandwich plates under repeated impact loadings , 2019, Composite Structures.

[26]  Yuli Chen,et al.  3D Pixel Mechanical Metamaterials , 2019, Advanced materials.

[27]  Yuguo Sun,et al.  A novel cylindrical negative stiffness structure for shock isolation , 2019, Composite Structures.

[28]  H. Cebeci,et al.  The effect of CNT-reinforced polyurethane foam cores to flexural properties of sandwich composites , 2018, Composites Part A: Applied Science and Manufacturing.

[29]  Lifeng Wang,et al.  Mechanical properties of sandwich composites with 3d-printed auxetic and non-auxetic lattice cores under low velocity impact , 2018, Materials & Design.

[30]  Qing Li,et al.  Low-velocity impact behaviour of sandwich panels with homogeneous and stepwise graded foam cores , 2018, Materials & Design.

[31]  Jesús Rodríguez,et al.  Effect of temperature on the fracture behavior of polyamide 12 and glass-filled polyamide 12 processed by selective laser sintering , 2018, Engineering Fracture Mechanics.

[32]  Daining Fang,et al.  A cellular metastructure incorporating coupled negative thermal expansion and negative Poisson's ratio , 2018, International Journal of Solids and Structures.

[33]  Akira Todoroki,et al.  3D printing of composite sandwich structures using continuous carbon fiber and fiber tension , 2018, Composites Part A: Applied Science and Manufacturing.

[34]  Bing Li,et al.  X-ray micro-computed tomography analysis of impact damage morphology in composite sandwich structures due to cold temperature arctic condition , 2018, Journal of Composite Materials.

[35]  K. Tan,et al.  Impact damage of composite sandwich structures in arctic condition , 2018 .

[36]  Wei Huang,et al.  Investigation on manufacturing and mechanical behavior of all-composite sandwich structure with Y-shaped cores , 2018 .

[37]  T. X. Yu,et al.  Experimental study on the dynamic behaviour of aluminium foam sandwich plates under single and repeated impacts at low temperature , 2018 .

[38]  T. Ngo,et al.  Impact and close-in blast response of auxetic honeycomb-cored sandwich panels: Experimental tests and numerical simulations , 2017 .

[39]  Q. Qin,et al.  Compressive crushing of novel aluminum hexagonal honeycombs with perforations: Experimental and numerical investigations , 2017 .

[40]  Wentao He,et al.  The effect of impactor shape on the low-velocity impact behavior of hybrid corrugated core sandwich structures , 2017 .

[41]  F. Scarpa,et al.  Lattice Metamaterials with Mechanically Tunable Poisson’s Ratio for Vibration Control , 2017 .

[42]  Fabrizio Scarpa,et al.  Double‐Negative Mechanical Metamaterials Displaying Simultaneous Negative Stiffness and Negative Poisson's Ratio Properties , 2016, Advanced materials.

[43]  N. Fang,et al.  Lightweight Mechanical Metamaterials with Tunable Negative Thermal Expansion. , 2016, Physical review letters.

[44]  C. Seepersad,et al.  Mechanical design of negative stiffness honeycomb materials , 2015, Integrating Materials and Manufacturing Innovation.

[45]  Jinkyu Yang,et al.  Reentrant Origami-Based Metamaterials with Negative Poisson's Ratio and Bistability. , 2015, Physical review letters.

[46]  C. Seepersad,et al.  Negative stiffness honeycombs for recoverable shock isolation , 2015 .

[47]  D. Fang,et al.  A lightweight, high compression strength ultra high temperature ceramic corrugated panel with potential for thermal protection system applications , 2015 .

[48]  M. van Hecke,et al.  Programmable mechanical metamaterials. , 2014, Physical review letters.

[49]  D. Luo,et al.  A mechanical metamaterial made from a DNA hydrogel. , 2012, Nature nanotechnology.

[50]  Zachary G. Nicolaou,et al.  Mechanical metamaterials with negative compressibility transitions. , 2012, Nature materials.

[51]  Lin-zhi Wu,et al.  Mechanical response of all-composite pyramidal lattice truss core sandwich structures , 2011 .

[52]  Rachel A. Tomlinson,et al.  Anisotropy, homogeneity and ageing in an SLS polymer , 2011 .

[53]  C. Santiuste,et al.  Modelling of composite sandwich structures with honeycomb core subjected to high-velocity impact , 2010 .

[54]  Gene Hou,et al.  CFPC material characteristics and SLS prototyping process , 2009 .

[55]  Norman A. Fleck,et al.  Performance of metallic honeycomb-core sandwich beams under shock loading , 2006 .

[56]  J. Lang,et al.  A curved-beam bistable mechanism , 2004, Journal of Microelectromechanical Systems.

[57]  Ares J. Rosakis,et al.  Impact failure characteristics in sandwich structures: Part I: Basic failure mode selection , 2002 .

[58]  D. Fang,et al.  Novel multifunctional negative stiffness mechanical metamaterial structure: Tailored functions of multi-stable and compressive mono-stable , 2021 .