A Universal Inflow Turbulence Generator for the Large Eddy Simulation of a Wide-Speed Compressible Turbulence Boundary Layer with Minimal Transitional Length

[1]  Hongwei Liu,et al.  Direct numerical simulation of a supersonic turbulent boundary layer over a compression–decompression corner , 2021 .

[2]  C. Kähler,et al.  Large-scale coherent structures in compressible turbulent boundary layers , 2021, Journal of Fluid Mechanics.

[3]  Romain Guichard,et al.  Assessment of an improved Random Flow Generation method to predict unsteady wind pressures on an isolated building using Large-Eddy Simulation , 2019, Journal of Wind Engineering and Industrial Aerodynamics.

[4]  K. M. Porter,et al.  Selective upstream influence on the unsteadiness of a separated turbulent compression ramp flow , 2019, Physics of Fluids.

[5]  Nitin S. Dhamankar,et al.  Overview of Turbulent Inflow Boundary Conditions for Large-Eddy Simulations , 2017 .

[6]  Xiaohua Wu,et al.  Inflow Turbulence Generation Methods , 2017 .

[7]  N. Parziale,et al.  Krypton tagging velocimetry in a turbulent Mach 2.7 boundary layer , 2016 .

[8]  Chii‐Ming Cheng,et al.  Simulation of turbulent flows around a prism in suburban terrain inflow based on random flow generation method simulation , 2015 .

[9]  Nicholas J. Bisek,et al.  Resolution effects in compressible, turbulent boundary layer simulations , 2015 .

[10]  Ashraf A. El Damatty,et al.  Consistent inflow turbulence generator for LES evaluation of wind-induced responses for tall buildings , 2015 .

[11]  Philippe R. Spalart,et al.  Synthetic Turbulence Generators for RANS-LES Interfaces in Zonal Simulations of Aerodynamic and Aeroacoustic Problems , 2014 .

[12]  Xue-Song Bai,et al.  A fully divergence-free method for generation of inhomogeneous and anisotropic turbulence with large spatial variation , 2014, J. Comput. Phys..

[13]  Nicholas J. Bisek,et al.  Plasma Control of a Turbulent Shock Boundary-Layer Interaction , 2013 .

[14]  D. Gaitonde,et al.  Spatially Developing Supersonic Turbulent Boundary Layer with a Body-Force-Based Method , 2013 .

[15]  Rodrigo Paz,et al.  A time and space correlated turbulence synthesis method for Large Eddy Simulations , 2013, J. Comput. Phys..

[16]  Antony Jameson,et al.  A New Class of High-Order Energy Stable Flux Reconstruction Schemes for Triangular Elements , 2012, J. Sci. Comput..

[17]  Antony Jameson,et al.  A New Class of High-Order Energy Stable Flux Reconstruction Schemes , 2011, J. Sci. Comput..

[18]  Soshi Kawai,et al.  Improving Low-Frequency Characteristics of Recycling/Rescaling Inflow Turbulence Generation , 2011 .

[19]  Kenneth E. Jansen,et al.  A dynamic multi-scale approach for turbulent inflow boundary conditions in spatially developing flows , 2011, Journal of Fluid Mechanics.

[20]  Ben Thornber,et al.  On the importance of generating accurate turbulent boundary condition for unsteady simulations , 2011 .

[21]  Xian Liang,et al.  Direct numerical simulation of shock/turbulent boundary layer interaction in a supersonic compression ramp , 2010 .

[22]  Gavin Tabor,et al.  Inlet conditions for large eddy simulation: A review , 2010 .

[23]  Neil D. Sandham,et al.  Comparison of three large-eddy simulations of shock-induced turbulent separation bubbles , 2009 .

[24]  Luc Vervisch,et al.  Three-dimensional boundary conditions for direct and large-eddy simulation of compressible viscous flows , 2008, J. Comput. Phys..

[25]  M. Pino Martin,et al.  Direct numerical simulation of hypersonic turbulent boundary layers. Part 1. Initialization and comparison with experiments , 2007, Journal of Fluid Mechanics.

[26]  Elias Balaras,et al.  A priori and a posteriori tests of inflow conditions for large-eddy simulation , 2004 .

[27]  M. Pino Martin,et al.  Assessment of inflow boundary conditions for compressible turbulent boundary layers , 2004 .

[28]  Sergio Pirozzoli,et al.  Direct numerical simulation and analysis of a spatially evolving supersonic turbulent boundary layer at M=2.25 , 2004 .

[29]  F. Porté-Agel,et al.  Experimental study of wall boundary conditions for large-eddy simulation , 2001, Journal of Fluid Mechanics.

[30]  Robert D. Moser,et al.  Direct numerical simulation of a supersonic turbulent boundary layer at Mach 2.5 , 2000, Journal of Fluid Mechanics.

[31]  F. Nicoud,et al.  Subgrid-Scale Stress Modelling Based on the Square of the Velocity Gradient Tensor , 1999 .

[32]  T. Lund,et al.  Generation of Turbulent Inflow Data for Spatially-Developing Boundary Layer Simulations , 1998 .

[33]  M. Lesieur,et al.  Large-eddy simulation of transition to turbulence in a boundary layer developing spatially over a flat plate , 1996, Journal of Fluid Mechanics.

[34]  Gordon Erlebacher,et al.  Direct simulation of spatially evolving compressible turbulent boundary layers , 1995 .

[35]  J. D. Li,et al.  Experimental support for the attached-eddy hypothesis in zero-pressure-gradient turbulent boundary layers , 1990, Journal of Fluid Mechanics.

[36]  P. Spalart.  Direct simulation of a turbulent boundary layer up to Rθ = 1410 , 1988, Journal of Fluid Mechanics.

[37]  J.-P. Lacharme,et al.  Experimental study of a supersonic turbulent boundary layer using a laser Doppler anemometer , 1988 .

[38]  H H Fernholz,et al.  A Critical Compilation of Compressible Turbulent Boundary Layer Data , 1977 .

[39]  T. Kármán,et al.  Turbulence and Skin Friction , 1934 .