Improved Coding-Efficiency Two-Level Source Encoder for RF Switch-Mode Power Amplifiers

A ΣΔ-driven RF switch-mode power amplifier is inherently linear only when it has a two-level output. At the same time, a two-level output generates the largest amount of quantization noise. This brief analyzes the effect of nonequal level spacing in a three-level ΣΔ output and provides a method for shaping the corresponding error noise to regions outside the band of interest. Subsequently, the nonlinearity-shaping property is utilized to obtain an improved two-level drive signal based on three-level ΣΔ modulation. The new binary drive signal is proven to have better adjacent channel leakage ratio and higher coding efficiency than a conventional two-level ΣΔ modulator. In the investigated case, measured coding efficiency improves from 8.9% of the conventional two-level modulator to 21% of the modified two-level modulator.

[1]  Fadhel M. Ghannouchi,et al.  A Novel Architecture of Delta-Sigma Modulator Enabling All-Digital Multiband Multistandard RF Transmitters Design , 2008, IEEE Transactions on Circuits and Systems II: Express Briefs.

[2]  L.E. Larson,et al.  Design of H-Bridge Class-D Power Amplifiers for Digital Pulse Modulation Transmitters , 2007, IEEE Transactions on Microwave Theory and Techniques.

[3]  Thomas Johnson,et al.  RF Class-D Amplification With Bandpass Sigma–Delta Modulator Drive Signals , 2006, IEEE Transactions on Circuits and Systems I: Regular Papers.

[4]  Andreas Wentzel,et al.  RF class-S power amplifiers: State-of-the-art results and potential , 2010, 2010 IEEE MTT-S International Microwave Symposium.

[5]  Bumman Kim,et al.  A $\Delta\Sigma$ -Digitized Polar RF Transmitter , 2007, IEEE Transactions on Microwave Theory and Techniques.

[6]  A. Flament,et al.  An All-Digital RF Signal Generator Using High-Speed $\Delta\Sigma$ Modulators , 2009, IEEE Journal of Solid-State Circuits.