Modeling of the Recrystallization and Austenite Formation Overlapping in Cold-Rolled Dual-Phase Steels During Intercritical Treatments

[1]  K. Ushioda,et al.  Role of Nb on Microstructural Evolution during Intercritical Annealing in Low-carbon Steels , 2016 .

[2]  O. Bouaziz,et al.  Mechanism of Austenite Formation from Spheroidized Microstructure in an Intermediate Fe-0.1C-3.5Mn Steel , 2016, Metallurgical and Materials Transactions A.

[3]  S. Zwaag,et al.  Overview of the current issues in austenite to ferrite transformation and the role of migrating interfaces therein for low alloyed steels , 2015 .

[4]  Matthias Militzer,et al.  A Microstructure Evolution Model for Intercritical Annealing of a Low-carbon Dual-phase Steel , 2014 .

[5]  D. Barbier,et al.  Interactions between ferrite recrystallization and austenite formation in high-strength steels , 2014, Journal of Materials Science.

[6]  Wei Xu,et al.  Predicting the Austenite Fraction After Intercritical Annealing in Lean Steels as a Function of the Initial Microstructure , 2014, Metallurgical and Materials Transactions A.

[7]  Li Jun,et al.  Effect of heating rate on ferrite recrystallization and austenite formation of cold-roll dual phase steel , 2013 .

[8]  Dierk Raabe,et al.  Interaction between recrystallization and phase transformation during intercritical annealing in a c , 2013 .

[9]  W. Poole,et al.  The Effect of the Initial Microstructure on Recrystallization and Austenite Formation in a DP600 Steel , 2013, Metallurgical and Materials Transactions A.

[10]  R. Mohanty,et al.  Effect of Heating Rate on the Austenite Formation in Low-Carbon High-Strength Steels Annealed in the Intercritical Region , 2011 .

[11]  W. Poole,et al.  Austenite Formation in Plain Low-Carbon Steels , 2011 .

[12]  Wolfgang Bleck,et al.  Phase-Field Modeling of Austenite Formation from a Ferrite plus Pearlite Microstructure during Annealing of Cold-Rolled Dual-Phase Steel , 2011 .

[13]  T. Ogawa,et al.  Incomplete Recrystallization and Subsequent Microstructural Evolution during Intercritical Annealing in Cold-rolled Low Carbon Steels , 2010 .

[14]  Y. Bréchet,et al.  Kinetic transitions during non-partitioned ferrite growth in Fe–C–X alloys , 2009 .

[15]  Dagoberto Brandão Santos,et al.  Microstructural evolution at the initial stages of continuous annealing of cold rolled dual-phase steel , 2005 .

[16]  W. Poole,et al.  Austenite formation during intercritical annealing , 2004 .

[17]  L. Höglund,et al.  Thermo-Calc & DICTRA, computational tools for materials science , 2002 .

[18]  L. Pintschovius,et al.  Neutron diffraction study of the residual stress state of a cold-rolled steel strip , 1987 .

[19]  G. Krauss,et al.  Ferrite recrystallization and austenite formation in cold-rolled intercritically annealed steel , 1985 .

[20]  G. Speich,et al.  Formation of Austenite During Intercritical Annealing of Dual-Phase Steels , 1981 .

[21]  H. E. Kissinger Reaction Kinetics in Differential Thermal Analysis , 1957 .

[22]  M. Avrami Kinetics of Phase Change. I General Theory , 1939 .

[23]  A. Götte,et al.  Metall , 1897 .

[24]  W. Hager,et al.  and s , 2019, Shallow Water Hydraulics.

[25]  D. Barbier,et al.  Microstructures resulting from the interaction between ferrite recrystallization and austenite formation in dual-phase steels , 2014, Journal of Materials Science.

[26]  M. Enomoto,et al.  Growth of austenite from as-quenched martensite during intercritical annealing in an Fe–0.1C–3Mn–1.5Si alloy , 2013 .

[27]  D. Warrington,et al.  The Influence of Deformation on the Spheroidization and Coarsening of Pearlite , 1972 .

[28]  W. Tegart,et al.  Accelerated Spheroidization of Pearlite , 1968 .