Development and Evaluation of High-Stability Metal-Foil Resistor With a Resistance of 1 $\text{k}\Omega $
暂无分享,去创建一个
[1] Y Nakamura,et al. Calibration of a 10 : 1 ratio transformer using Thompson's method , 1997 .
[2] G. H. Rayner,et al. Coaxial Ac Bridges , 1984 .
[3] B.J. Pritchard,et al. Fabrication of reference standard 1 ohm resistors from Evanohm S alloy , 1990, Conference on Precision Electromagnetic Measurements.
[4] T. L. Zapf. Calibration of inductance standards in the Maxwell-Wien bridge circuit , 1961 .
[5] Saytaro Kon,et al. Uncertainty Evaluations of an AC Shunt Calibration System With a Load Effect Reduction Circuit , 2011, IEEE Transactions on Instrumentation and Measurement.
[6] D.L.H. Gibbings,et al. A design for resistors of calculable a.c./d.c. resistance ratio , 1963 .
[8] Nobu-hisa Kaneko,et al. Characterization of 100-$\Omega$ Metal Foil Standard Resistors , 2013, IEEE Transactions on Instrumentation and Measurement.
[9] Nobu-hisa Kaneko,et al. Development of High-Stability Metal-Foil Standard Resistors for DC and AC Measurements , 2012 .
[10] Yasuhiko Sakamoto,et al. Novel 100-Omega Metal Foil Resistor , 2011, IEEE Trans. Instrum. Meas..