RF-MEMS switch actuation pulse optimization using Taguchi’s method

Reliability and longevity comprise two of the most important concerns when designing micro-electro-mechanical-systems (MEMS) switches. Forcing the switch to perform close to its operating limits underlies a trade-off between response bandwidth and fatigue life due to the impact force of the cantilever touching its corresponding contact point. This paper presents for first time an actuation pulse optimization technique based on Taguchi’s optimization method to optimize the shape of the actuation pulse of an ohmic RF-MEMS switch in order to achieve better control and switching conditions. Simulation results show significant reduction in impact velocity (which results in less than 5 times impact force than nominal step pulse conditions) and settling time maintaining good switching speed for the pull down phase and almost elimination of the high bouncing phenomena during the release phase of the switch.

[1]  Genichi Taguchi,et al.  Taguchi methods : design of experiments , 1993 .

[2]  H. Newman,et al.  Lifetime Measurements on a High-Reliability RF-MEMS Contact Switch , 2008, IEEE Microwave and Wireless Components Letters.

[3]  K.V. Deligkaris,et al.  Thinned Planar Array Design Using Boolean PSO With Velocity Mutation , 2009, IEEE Transactions on Magnetics.

[4]  N. Charalampidis,et al.  An easy to control all-metal in-line-series ohmic RF MEMS switch , 2012 .

[5]  D. Czaplewski,et al.  A Soft-Landing Waveform for Actuation of a Single-Pole Single-Throw Ohmic RF MEMS Switch , 2005, Journal of Microelectromechanical Systems.

[6]  Hartono Sumali,et al.  Waveform design for pulse-and-hold electrostatic actuation in MEMS , 2007 .

[7]  Hartono Sumali,et al.  Modeling, simulation, and testing of the mechanical dynamics of an RF MEMS switch , 2005, 2005 International Conference on MEMS,NANO and Smart Systems.

[8]  A. Massa,et al.  LINEAR ANTENNA SYNTHESIS WITH A HYBRID GENETIC ALGORITHM , 2004 .

[9]  Traianos V. Yioultsis,et al.  Gradient-based adjoint-variable optimization of broadband microstrip antennas with mixed-order prism macroelements , 2008 .

[10]  Kuo-Shen Chen,et al.  A command shaping approach to enhance the dynamic performance and longevity of contact switches , 2009 .

[11]  Matthew S. Allen,et al.  Input and Design Optimization Under Uncertainty to Minimize the Impact Velocity of an Electrostatically Actuated MEMS Switch , 2008 .

[12]  George G. Adams,et al.  Modeling, simulation and measurement of the dynamic performance of an ohmic contact, electrostatically actuated RF MEMS switch , 2007 .

[13]  Mehran Mehregany,et al.  Contact Physics of Gold Microcontacts for ME , 1998 .

[14]  Gabriel M. Rebeiz.  RF MEMS: Theory, Design and Technology , 2003 .

[15]  Randy L. Haupt,et al.  Comparison between genetic and gradient-based optimization algorithms for solving electromagnetics problems , 1995 .

[16]  Christian Soize,et al.  Design optimization with an uncertain vibroacoustic model , 2008 .

[17]  Matthew S. Allen,et al.  Modeling and Input Optimization Under Uncertainty for a Collection of RF MEMS Devices , 2006 .