Influence of finite element mesh size on the carrying capacity analysis of single-row ball slewing bearing

Slewing bearings are widely used in industry to provide rotary support and carry heavy load. The load-carrying capacity is one of the most important features of a slewing bearing, and needs to be calculated cautiously. This paper investigates the effect of mesh size on the finite element (FE) analysis of the carrying capacity of slewing bearings. A local finite element contact model of the slewing bearing is firstly established, and verified using Hertz contact theory. The optimal mesh size of finite element model under specified loads is determined by analyzing the maximum contact stress and the contact area. The overall FE model of the slewing bearing is established and strain tests were performed to verify the FE results. The effect of mesh size on the carrying capacity of the slewing bearing is investigated by analyzing the maximum contact load, deformation, and load distribution. This study of finite element mesh size verification provides an important guidance for the accuracy and efficiency of carrying capacity of slewing bearings.

[1]  Xu Ji,et al.  Calculation analysis of yaw bearings with a hardened raceway , 2018, International Journal of Mechanical Sciences.

[2]  Szczepan Śpiewak,et al.  Modification of the raceway profile of a single-row ball slewing bearing , 2018, Mechanism and Machine Theory.

[3]  K. Johnson.  Contact Mechanics: Frontmatter , 1985 .

[5]  Srečko Glodež,et al.  Computational model for determination of static load capacity of three-row roller slewing bearings with arbitrary clearances and predefined raceway deformations , 2013 .

[6]  Yun Wang,et al.  Optimization design of structural parameters of single-row four-point contact ball slewing bearing , 2020 .

[8]  S. Melkote,et al.  Finite element modeling of fixture–workpiece contacts: single contact modeling and experimental verification , 2004 .

[9]  Rubén Lostado-Lorza,et al.  Using the finite element method and data mining techniques as an alternative method to determine the maximum load capacity in tapered roller bearings , 2017, J. Appl. Log..

[10]  Rongjing Hong,et al.  Hardened raceway calculation analysis of a three-row roller slewing bearing , 2018 .

[11]  Iker Heras,et al.  Load distribution and friction torque in four-point contact slewing bearings considering manufacturing errors and ring flexibility , 2019, Mechanism and Machine Theory.

[12]  J. Barbera,et al.  Contact mechanics , 1999 .

[14]  Abdennour Sebbagh,et al.  Whale optimizer algorithm to tune PID controller for the trajectory tracking control of robot manipulator , 2019, Journal of the Brazilian Society of Mechanical Sciences and Engineering.

[15]  Ruben Lostado,et al.  Optimization of operating conditions for a double-row tapered roller bearing , 2016 .

[16]  C. P. Butterfield,et al.  Wind Turbine Design Guideline DG03: Yaw and Pitch Rolling Bearing Life , 2009 .