Impact of iron losses on parameter identification of permanent magnet synchronous machines

Highly utilized permanent magnet synchronous machines (PMSMs) often show a significant inductance variation near and above the rated current values due to saturation. For precise modeling and control, the change in the parameters has to be considered by means of look-up tables. To parameterize these look-up tables, the inductances and the stator resistance have to be identified for various current set points. However, iron losses interfere with a precise identification if they are not considered. Therefore, an extended model is introduced to derive an identification method that considers and compensates for these effects. Measurement results prove the effectiveness of the proposed method.

[1]  Arle Ytterberg.  Die Eisenverluste in elektrischen Maschinen , 1915 .

[2]  T. Senjyu,et al.  A Novel Calculation Method for Iron Loss Resistance Suitable in Modeling Permanent Magnet Synchronous Motors , 2002, IEEE Power Engineering Review.

[3]  E. Philippow,et al.  Grundlagen der Elektrotechnik , 1975 .

[4]  B. Piepenbreier,et al.  General PMSM d,q-model using optimized interpolated absolute and differential inductance surfaces , 2011, 2011 IEEE International Electric Machines & Drives Conference (IEMDC).

[5]  T. Dordea.  Beitrag zur Zweiachsentheorie der elektrischen Maschinen , 1966 .

[6]  S. M. Abu Sharkh,et al.  Design and performance of a new technique for sensorless control of a downhole brushless PM motor , 1998 .

[7]  Abdul Rehman Tariq,et al.  A novel numerical method for the calculation of iron and magnet losses of IPMSMs , 2009, 2009 IEEE International Electric Machines and Drives Conference.

[8]  S. Hiti,et al.  Identification of machine parameters of a synchronous motor , 2003, IEEE Transactions on Industry Applications.

[9]  K. M. Rahman,et al.  Identification of machine parameters of a synchronous motor , 2003 .

[10]  G.W. Jewell,et al.  Resistance estimation for temperature determination in PMSMs through signal injection , 2005, IEEE International Conference on Electric Machines and Drives, 2005..

[11]  Liyi Li,et al.  Research of core loss of permanent magnet synchronous motor (PMSM) in AC servo system , 2008, 2008 International Conference on Electrical Machines and Systems.

[12]  K. Oberretl.  Eisenverluste, Flußpulsation und magnetische Nutkeile in Käfigläufermotoren , 2000 .

[13]  G.D. Demetriades,et al.  A Real-Time Thermal Model of a Permanent-Magnet Synchronous Motor , 2010, IEEE Transactions on Power Electronics.

[14]  R. Weninger.  Einfluß der Maschinenparameter auf Zusatzverluste, Momentoberschwingungen und Kommutierung bei der Umrichterspeisung von Asynchronmaschinen , 1981 .