Reliability of vacuum packaged MEMS gyroscopes

The greatest challenge for the successful commercialization of MEMS (micro-electro-mechanical system) technology is proving its reliability. Of concern in particular are the reliability and long-term stability of wafer level vacuum packaged MEMS gyroscope sensors subjected to cyclic mechanical stresses at high frequencies. In this study, we carried out several reliability tests and investigated the failure mechanisms of the anodically bonded vacuum gyroscope sensors designed for commercial electronic products. Particularly we studied mechanical reliability issues such as fatigue, shock, and vibration. It was found that successful vacuum packaging could be achieved through the optimization of the bonding process by reducing leakage and the deposition of titanium coating for reducing out-gassing inside the cavity. The effects of the pre-baking process are also described in this study. The current design of the gyroscope structure is found to be safe from fatigue failure for the 1000 h of operation test. The MEMS gyroscope sensor survives the drop and vibration qualification tests for electronic products without any damage, indicating the robustness of the sensor. The reliability test results presented in this study demonstrate that the MEMS gyroscope sensor is very close to commercialization.

[1]  Shinji Kobayashi,et al.  Double-frame silicon gyroscope packaged under low pressure by wafer bonding (特集 振動型センサ・アクチュエータ) , 2000 .

[2]  Masayoshi Esashi,et al.  Cavity Pressure Control For Critical Damping Of Packaged Micro Mechanical Devices , 1995, Proceedings of the International Solid-State Sensors and Actuators Conference - TRANSDUCERS '95.

[3]  D. Martin Knotter,et al.  A Novel Resist and Post-Etch Residue Removal Process Using Ozonated Chemistry , 1998 .

[4]  S.B. Brown,et al.  Materials reliability in MEMS devices , 1997, Proceedings of International Solid State Sensors and Actuators Conference (Transducers '97).

[5]  W. Ko,et al.  Micromachining and Micropackaging of Transducers , 1986 .

[6]  Robert O. Ritchie,et al.  High-cycle Fatigue and Durability of Polycrystalline Silicon Thin ®lms in Ambient Air , 2022 .

[7]  K. Najafi,et al.  Vacuum packaging technology using localized aluminum/silicon-to-glass bonding , 2002, Technical Digest. MEMS 2001. 14th IEEE International Conference on Micro Electro Mechanical Systems (Cat. No.01CH37090).

[8]  M. W. Putty.  A Maicromachined vibrating ring gyroscope , 1994 .

[9]  A. Gerlach,et al.  Low-temperature anodic bonding of silicon to silicon wafers by means of intermediate glass layers , 1999 .

[10]  F. Cicoira,et al.  Nonevaporable getter films for ultrahigh vacuum applications , 1998 .

[11]  A. Jourdain,et al.  Investigation of the hermeticity of BCB-sealed cavities for housing (RF-)MEMS devices , 2002, Technical Digest. MEMS 2002 IEEE International Conference. Fifteenth IEEE International Conference on Micro Electro Mechanical Systems (Cat. No.02CH37266).

[12]  Robert O. Ritchie,et al.  Fatigue of polycrystalline silicon for microelectromechanical system applications: crack growth and stability under resonant loading conditions , 2004 .

[13]  R. Ritchie,et al.  High-cycle fatigue of single-crystal silicon thin films , 2001 .

[14]  Oliver Paul,et al.  Mechanical Reliability of MEMS-structures under shock load , 2001, Microelectron. Reliab..

[15]  Farrokh Ayazi,et al.  Micromachined inertial sensors , 1998, Proc. IEEE.

[16]  Byeung Leul Lee,et al.  A de-coupled vibratory gyroscope using a mixed micro-machining technology , 2001, Proceedings 2001 ICRA. IEEE International Conference on Robotics and Automation (Cat. No.01CH37164).

[17]  R. Vos,et al.  A novel resist and post-etch residue removal process using ozonated chemistries , 1998, 1998 Symposium on VLSI Technology Digest of Technical Papers (Cat. No.98CH36216).

[18]  Hal Greenhouse.  Hermeticity of electronic packages , 2000 .

[19]  R. Schlögl,et al.  Analysis of Bonding‐Related Gas Enclosure in Micromachined Cavities Sealed by Silicon Wafer Bonding , 1997 .

[20]  M. Nese,et al.  New method for testing hermeticity of silicon sensor structures , 1996 .

[21]  Masayoshi Esashi,et al.  Anodic bonding for integrated capacitive sensors , 1992, [1992] Proceedings IEEE Micro Electro Mechanical Systems.

[22]  Yilong Hao,et al.  An SOI–MEMS technology using substrate layer and bonded glass as wafer-level package , 2002 .

[23]  U. Gösele,et al.  Gas development at the interface of directly bonded silicon wafers: investigation on silicon-based pressure sensors , 1996 .

[24]  Hyun-Su Kim,et al.  A tunable vibratory microgyroscope , 1998 .

[25]  G. Stemme,et al.  Gas damping of electrostatically excited resonators , 1997 .