A homogenized constitutive model for 2D woven composites under finite deformation: Considering fiber reorientation

[1]  Jiqiang Hu,et al.  A novel FFT framework with coupled non-local elastic-plastic damage model for the thermomechanical failure analysis of UD-CF/PEEK composites , 2024, Composites Science and Technology.

[2]  N. Zhang,et al.  Damage behavior and failure mechanism of composite sandwich panel subjected to localized impact: A comprehensive study , 2023, Thin-Walled Structures.

[3]  Zhixing Li,et al.  A 3D objective material model for elastic-plastic damage behavior of fiber reinforced polymer composites , 2023, Composites Part A: Applied Science and Manufacturing.

[4]  S. Mercier,et al.  Orthotropic viscoelastic characterization of thin woven composites by a combination of experimental and numerical methods , 2023, Composite Structures.

[5]  Deng’an Cai,et al.  Design and Analysis of a New Frangible Composite Cover With Split-Flap Opening and Self-Closing Features , 2023, Applied Composite Materials.

[6]  H. Cai,et al.  Multiscale progressive damage model for plain woven composites , 2023, International Journal of Mechanical Sciences.

[7]  Zhenyu Yang,et al.  Numerical investigation on the mechanical behaviors of 2D woven composites under complex in-plane stress states , 2023, Composite Structures.

[8]  Jian Deng,et al.  On damage behavior and stability of composite T-shaped stiffened panels under compression after impact considering impact locations , 2023, Thin-Walled Structures.

[9]  F. Otero,et al.  A three-dimensional plastic-damage model for polymer composite materials , 2022, Composites Part A: Applied Science and Manufacturing.

[10]  Jiayi Liu,et al.  Fabrication method and dynamic responses of composite sandwich structure with reentrant honeycomb cores , 2022, Composite Structures.

[11]  Zhonghai Xu,et al.  A novel methodology to research the residual compressive mechanical properties of composite stiffened panel after low velocity impact based on quantification damage simulation , 2022, Polymer Composites.

[12]  L. Preziosi,et al.  Passive and active fiber reorientation in anisotropic materials , 2022, International Journal of Engineering Science.

[13]  Xinwei Wang,et al.  A comprehensive analysis of damage behaviors of composite sandwich structures under localized impact , 2022, Mechanics of Advanced Materials and Structures.

[14]  F. Taheri‐Behrooz,et al.  Phenomenological Constitutive Modeling of the Non-Linear Loading-Unloading Response of UD Fiber-Reinforced Polymers , 2022, Composite Structures.

[15]  Liming Chen,et al.  Fabrication and axial compression test of thermoplastic composite cylindrical sandwich structures with hierarchical honeycomb core , 2021 .

[16]  Haitao Cui,et al.  A mesoscale fatigue progressive damage model for 3D woven composites , 2021 .

[17]  H. Singh,et al.  An improved orthotropic elasto-plastic damage model for plain woven composites , 2021 .

[18]  Sezer Özerinç,et al.  Failure behavior of scarf-bonded woven fabric CFRP laminates , 2020 .

[19]  X. Ling,et al.  A microscopic elasto-plastic damage model for characterizing transverse responses of unidirectional fiber-reinforced polymer composites , 2020 .

[20]  Z. Guan,et al.  Multiscale modelling of scaling effects in the impact response of plain woven composites , 2020 .

[21]  Yunong Zhao,et al.  A constitutive model for elastoplastic-damage coupling effect of unidirectional fiber-reinforced polymer matrix composites , 2020 .

[22]  Zheng-ming Huang,et al.  A micromechanics based elasto-plastic damage model for unidirectional composites under off-axis tensile loads , 2020, Scientific Reports.

[23]  T. Wehrkamp-Richter,et al.  Predicting the non-linear mechanical response of triaxial braided composites , 2018, Composites Part A: Applied Science and Manufacturing.

[24]  Victor Birman,et al.  Review of current trends in research and applications of sandwich structures , 2018, Composites Part B: Engineering.

[25]  Paul M. Weaver,et al.  Optimization of postbuckling behaviour of variable thickness composite panels with variable angle tows: Towards “Buckle-Free” design concept , 2018 .

[26]  Xiaopei Wang,et al.  Experimental investigation on mechanical properties of unidirectional and woven fabric glass/epoxy composites under off-axis tensile loading , 2017 .

[27]  R. Hinterhölzl,et al.  Three-dimensional nonlinear constitutive model for composites , 2016 .

[28]  R. Hinterhölzl,et al.  Mechanism based nonlinear constitutive model for composite laminates subjected to large deformations , 2015 .

[29]  W. Tao,et al.  Numerical prediction of effective thermal conductivities of 3D four-directional braided composites , 2015 .

[30]  Christian Linder,et al.  A homogenization approach for nonwoven materials based on fiber undulations and reorientation , 2014 .

[31]  Alain Goriely,et al.  Dynamic fiber reorientation in a fiber-reinforced hyperelastic material , 2013 .

[32]  Krishna Shankar,et al.  A combined elastoplastic damage model for progressive failure analysis of composite materials and structures , 2012 .

[33]  S. Pinho,et al.  Constitutive modelling of fibre-reinforced composites with unidirectional plies using a plasticity-based approach , 2011 .

[34]  M. Meo,et al.  A comparison of homogenization methods for 2-D woven composites , 2011 .

[35]  Shuguang Li,et al.  Formulation of a unit cell of a reduced size for plain weave textile composites , 2011 .

[36]  I. Daniel,et al.  A Constitutive Model for Fiber-reinforced Polymer Composites , 2010 .

[37]  I. Verpoest,et al.  Simulating and validating the draping of woven fiber reinforced polymers , 2008 .

[38]  Kwansoo Chung,et al.  Constitutive modeling of woven composites considering asymmetric/anisotropic, rate dependent, and nonlinear behavior , 2007 .

[39]  Ala Tabiei,et al.  Fiber Reorientation in Laminated and Woven Composites for Finite Element Simulations , 2003 .

[40]  K. Reifsnider,et al.  Characterization of Nonlinear Behavior in Woven Composite Laminates , 2002, Applied Composite Materials.

[41]  A. Tabiei,et al.  Flexible Woven Fabric Micromechanical Material Model with Fiber Reorientation , 2002 .

[42]  Horacio Dante Espinosa,et al.  A 3-D Finite Deformation Anisotropic Visco-Plasticity Model for Fiber Composites , 2001 .

[43]  A. Gasser,et al.  Damage evolution in [±45]s laminates with fiber rotation , 2000 .

[44]  C. Sun,et al.  The effect of deformation-induced change of fiber orientation on the non-linear behavior of polymeric composite laminates , 2000 .

[45]  G. Odegard,et al.  Nonlinear Analysis of Woven Fabric-Reinforced Graphite/PMR-15 Composites under Shear-Dominated Biaxial Loads , 2000 .

[46]  F. Allahdadi,et al.  A Quadratic Yield Function for Fiber-Reinforced Composites , 1997 .

[47]  C. Sun,et al.  A Simple Flow Rule for Characterizing Nonlinear Behavior of Fiber Composites , 1989 .

[48]  Y. Benveniste,et al.  A new approach to the application of Mori-Tanaka's theory in composite materials , 1987 .

[49]  Zhigao Huang,et al.  Injection over-molding warpage prediction of continuous fiber-reinforced thermoplastic composites considering yarn reorientation , 2022, Thin-Walled Structures.

[50]  Tomohiro Yokozeki,et al.  Simple constitutive model for nonlinear response of fiber-reinforced composites with loading-directional dependence , 2007 .

[51]  M. Xie,et al.  A plasticity model for unidirectional composite materials and its applications in modeling composites testing , 1995 .