Synthesis and field electron emission properties of multi-walled carbon nanotube films directly grown on catalytic stainless steel substrate

[1]  W. Qian,et al.  Low pressure hydrogen sensing based on carbon nanotube field emission: Mechanism of atomic adsorption induced work function effects , 2017 .

[2]  N. Xu,et al.  Epitaxial growth of multiwall carbon nanotube from stainless steel substrate and effect on electrical conduction and field emission , 2017, Nanotechnology.

[3]  V. Sebastián,et al.  Growth of carbonaceous nanomaterials over stainless steel foams. Effect of activation temperature , 2016 .

[4]  Min-Sik Shin,et al.  Preparation of a miniature carbon nanotube paste emitter for very high resolution X-ray imaging , 2016 .

[5]  Fuquan Wang,et al.  Hydrogen sensing characteristics from carbon nanotube field emissions. , 2016, Nanoscale.

[6]  Changkun Dong,et al.  Improved field emission properties of carbon nanotubes grown on stainless steel substrate and its application in ionization gauge , 2016 .

[7]  Jian Sun,et al.  Metrological properties of an ionization gauge with carbon nanotube cathode in different gases , 2016 .

[8]  Kiyofumi Yamagiwa,et al.  Liquid-phase synthesis of highly aligned carbon nanotubes on preheated stainless steel substrates , 2016 .

[9]  W. Lei,et al.  High brightness field emission from printed carbon nanotubes in an S-band microwave gun , 2016 .

[10]  Yongjun Cheng,et al.  Wide-range Vacuum Measurements from MWNT Field Emitters Grown Directly on Stainless Steel Substrates , 2016, Nanoscale Research Letters.

[11]  W. Lei,et al.  High-current field-emission of carbon nanotubes and its application as a fast-imaging X-ray source , 2015 .

[12]  Jian Sun,et al.  An overview of ionization gauges with carbon nanotube cathodes , 2015 .

[13]  Yoon-Ho Song,et al.  Great improvement in adhesion and uniformity of carbon nanotube field emitters through reactive nanometer-scale SiC fillers , 2015 .

[14]  J. Torralba,et al.  Simultaneous synthesis of vertically aligned carbon nanotubes and amorphous carbon thin films on stainless steel , 2015 .

[15]  A. Hart,et al.  Mechanism and Enhanced Yield of Carbon Nanotube Growth on Stainless Steel by Oxygen-Induced Surface Reconstruction , 2015 .

[16]  H. Kim,et al.  Optimum design for the carbon nanotube based micro-focus X-ray tube , 2015 .

[17]  I. Teng,et al.  On the use of new oxidized Co-Cr-Pt-O catalysts for vertically-aligned few-walled carbon nanotube forest synthesis in electron cyclotron resonance chemical vapor deposition , 2014 .

[18]  Y. Levendis,et al.  Oxidative heat treatment of 316L stainless steel for effective catalytic growth of carbon nanotubes , 2014 .

[19]  Sang-hwa Lee,et al.  Electric field enhancements in In2O3-coated single-walled carbon nanotubes , 2014 .

[20]  M. Bestetti,et al.  Direct growth of MWCNTs on 316 stainless steel by chemical vapor deposition: Effect of surface nano-features on CNT growth and structure , 2013 .

[21]  Nathan Hordy,et al.  The effect of carbon input on the morphology and attachment of carbon nanotubes grown directly from stainless steel , 2013 .

[22]  J. Ting,et al.  Very rapid growth of aligned carbon nanotubes on metallic substrates , 2013 .

[23]  H. Tamon,et al.  Direct synthesis of carbon nanotubes on stainless steel electrode for enhanced catalyst efficiency in a glucose fuel cell , 2013 .

[24]  Yoon-Ho Song,et al.  A vacuum-sealed compact x-ray tube based on focused carbon nanotube field-emission electrons , 2013, Nanotechnology.

[25]  H. Jiang,et al.  Chiral-selective growth of single-walled carbon nanotubes on stainless steel wires , 2012 .

[26]  W. Choi,et al.  Ultra-high current density carbon nanotube field emitter structure on three-dimensional micro-channeled copper , 2012 .

[27]  A. Pandurangan,et al.  Electrophoretic deposition of cobalt catalyst layer over stainless steel for the high yield synthesis of carbon nanotubes , 2012 .

[28]  Wenzhi Li,et al.  Synthesis and field emission properties of vertically aligned carbon nanotube arrays on copper , 2012 .

[29]  K. Jiang,et al.  A vacuum sensor using field emitters made by multiwalled carbon nanotube yarns , 2012 .

[30]  S. Wilfert,et al.  Field emitter-based vacuum sensors , 2012 .

[31]  Haifeng Zhao,et al.  Improved field emission performance of carbon nanotube by introducing copper metallic particles , 2011, Nanoscale research letters.

[32]  I. Han,et al.  The synthesis of vertically-aligned carbon nanotubes on an aluminum foil laminated on stainless steel , 2011 .

[33]  W. Choi,et al.  Interface control: A modified rooting technique for enhancing field emission from multiwall carbon nanotube based bulk emitters , 2011 .

[34]  S. Lefrant,et al.  The synthesis and characterization of carbon nanotubes grown by chemical vapor deposition using a stainless steel catalyst , 2011 .

[35]  Lei Ding,et al.  Synthesis of high-density, large-diameter, and aligned single-walled carbon nanotubes by multiple-cycle growth methods. , 2011, ACS nano.

[36]  A. Hiraki,et al.  Growth of a three-dimensional complex carbon nanoneedle electron emitter for fabrication of field emission device , 2010 .

[37]  M. Lima,et al.  Spinnable carbon nanotube forests grown on thin, flexible metallic substrates , 2010 .

[38]  Seunghyun Baik,et al.  Vertically-aligned carbon nano-tube membrane filters with superhydrophobicity and superoleophilicity , 2010 .

[39]  Qiaoqin Yang,et al.  Aligned growth and alignment mechanism of carbon nanotubes by hot filament chemical vapor deposition , 2010 .

[40]  Dao Quang Duy,et al.  Growth of carbon nanotubes on stainless steel substrates by DC-PECVD , 2009 .

[41]  S. R. P. Silva,et al.  Interpretation of the field enhancement factor for electron emission from carbon nanotubes , 2009 .

[42]  M. Ghoranneviss,et al.  Direct growth of carbon nanotubes on Ar ion bombarded AISI 304 stainless steel substrates , 2009 .

[43]  A. Dhinojwala,et al.  Superhydrophobic conductive carbon nanotube coatings for steel. , 2009, Langmuir : the ACS journal of surfaces and colloids.

[44]  Jean-Luc Meunier,et al.  A simple thermal CVD method for carbon nanotube synthesis on stainless steel 304 without the addition of an external catalyst , 2009 .

[45]  Satomi Kawamoto,et al.  An experimental study on carbon nanotube cathodes for electrodynamic tether propulsion , 2007 .

[46]  S. Fan,et al.  Cold linear cathodes with carbon nanotube emitters and their application in luminescent tubes , 2007 .

[47]  Surjya K. Pal,et al.  Direct growth of aligned carbon nanotubes on bulk metals , 2006, Nature nanotechnology.

[48]  Riichiro Saito,et al.  Raman spectroscopy of carbon nanotubes , 2005 .

[49]  G. Myneni,et al.  Carbon nanotube electron source based ionization vacuum gauge , 2004 .

[50]  S. Shi,et al.  Field emission properties of aligned carbon nanotubes grown on stainless steel using CH4/CO2 reactant gas , 2004 .

[51]  R. L. Wal,et al.  Carbon nanotube synthesis upon stainless steel meshes , 2003 .