Roughness measurement of rock discontinuities using a confocal laser scanning microscope and the Fourier spectral analysis

Abstract The fracture roughness of rock specimens is observed by a new confocal laser scanning microscope (CLSM; Olympus OLS1100). The wavelength of the laser is 488 nm, and laser scanning is managed by a light polarization method using two galvano-meter scanner mirrors. The function of laser reflection auto-focusing enables line data to be measured rapidly and precisely. The system improves the resolution in the light axis (namely z ) direction because of the confocal optics. It is possible to measure a specimen of up to 10×10 cm in size when fixed on a specially designed stage. Sampling is managed with a 2.5-μm spacing along the x and y directions. The highest measurement resolution in the z direction is 0.05 μm, which is more accurate than other methods. Core specimens of coarse and fine grained granites were provided and fractures were artificially induced by a Brazilian test method. Measurements were performed along three scan lines on each fracture surface. The measured data were represented as 2-D and 3-D digital images showing detailed features of roughness. Line profiles of the coarse granites showed more changes of undulation than those of the fine granite. Spectral analyses by the fast Fourier transform (FFT) were performed to characterize the roughness data quantitatively and to identify influential frequency of roughness. The FFT results show that components of low frequencies are dominant in the fracture roughness. This study also verifies that spectral analysis is a good approach to understand complicated characteristics of fracture roughness. One of the ultimate objectives of the study was to suggest a methodology to select effective frequencies among the constituent frequencies of roughness as measured with very accurate measurement equipment. The other objective was to perform reconstruction of roughness with noise filtering which will be applied as input data to a fracture model for a numerical analysis.

[1]  Norbert H. Maerz,et al.  Joint roughness measurement using shadow profilometry , 1990 .

[2]  Samuel D. Stearns,et al.  Signal processing algorithms using Fortran and C , 1992 .

[3]  Yong-Seok Seo,et al.  Microscopic observation and contact stress analysis of granite under compression , 2002 .

[4]  J. Gale,et al.  Comparison of coupled fracture deformation and fluid flow models with direct measurements of fracture pore structure and stress-flow properties , 1987 .

[5]  S. Priest,et al.  ESTIMATION OF DISCONTINUITY SPACING AND TRACE LENGTH USING SCANLINE SURVEYS , 1981 .

[6]  Stephen R. Brown,et al.  Broad bandwidth study of the topography of natural rock surfaces , 1985 .

[7]  S. Gentier,et al.  Laboratory testing of the voids of a fracture , 1989 .

[8]  B. Bonner,et al.  Automatic, digital system for profiling rough surfaces , 1985 .

[9]  J. Sausse,et al.  Quantification of fluid flow: hydro-mechanical behaviour of different natural rough fractures , 2000 .

[10]  P. Kurowski,et al.  Experimental study of the transport properties of rough self-affine fractures , 2000 .

[11]  Pinnaduwa Kulatilake,et al.  New peak shear strength criteria for anisotropic rock joints , 1995 .

[12]  J. T. Fredrich,et al.  3D imaging of porous media using laser scanning confocal microscopy with application to microscale transport processes , 1999 .

[13]  Thompson,et al.  Fractal sandstone pores: Automated measurements using scanning-electron-microscope images. , 1986, Physical review. B, Condensed matter.

[14]  Paul Tapponnier,et al.  Development of stress-induced microcracks in Westerly Granite , 1976 .

[15]  J. Carr,et al.  The fractal dimension as a measure of the roughness of rock discontinuity profiles , 1990 .

[16]  T. Babadagli,et al.  A new computer-controlled surface-scanning device for measurement of fracture surface roughness , 2001 .

[17]  Pinnaduwa Kulatilake,et al.  Requirements for accurate quantification of self affine roughness using the roughness-length method , 1997 .

[18]  The anisotropy of surface roughness measured using a digital photogrammetric technique , 1995, Geological Society, London, Special Publications.

[19]  Y. Ichikawa,et al.  An Experimental Study on Damage Propagation of Intact Granite. , 1994 .

[20]  W. Power,et al.  Topography of natural and artificial fractures in granitic rocks: Implications for studies of rock friction and fluid migration , 1997 .