Hysteresis current control for AC-DC converter using single-phase matrix converter fed permanent magnet motor

In this paper, a computer simulation model of Hysteresis Current Control (HCC) technique for AC to DC converter fed permanent magnet DC motor (PMDC) using single-phase matrix converter (SPMC) topology is investigated. As the AC-DC converter fed PMDC motor yields a non-linear load, this can affect the generating of harmonics resulting high total harmonics distortion (THD) level hence low power factor. In addition, this phenomenon also have a set back in deteriorating the system operating performances. The use of HCC to achieve high power factor and low total harmonic distortion (THD) level is proposed. On the basis of the proposed modelling, the switching algorithm of the hysteresis control for the active power filter function (APF) is firstly studied and investigated. Simulation results are presented to verify the accuracy and feasibility of the proposed solution.

[1]  M. K. Hamzah,et al.  Advanced single-phase AC-DC converter using single-phase matrix converter topology , 2011, International Conference on Electrical, Control and Computer Engineering 2011 (InECCE).

[2]  Yao Sun,et al.  Modulation Strategy Based on Mathematical Construction for Matrix Converter Extending the Input Reactive Power Range , 2014, IEEE Transactions on Power Electronics.

[3]  Ciro Attaianese,et al.  High Performance Digital Hysteresis Control for Single Source Cascaded Inverters , 2013, IEEE Transactions on Industrial Informatics.

[4]  Kamal Al-Haddad,et al.  A Novel Six-Band Hysteresis Control for the Packed U Cells Seven-Level Converter: Experimental Validation , 2012, IEEE Transactions on Industrial Electronics.

[5]  Athanasios N. Safacas,et al.  Open-Circuit Fault Diagnosis for Matrix Converter Drives and Remedial Operation Using Carrier-Based Modulation Methods , 2014, IEEE Transactions on Industrial Electronics.

[6]  Lan Xiao,et al.  Two-Switch Dual-Buck Grid-Connected Inverter With Hysteresis Current Control , 2012, IEEE Transactions on Power Electronics.

[7]  Fengjiang Wu,et al.  Analysis and Solution of Current Zero-Crossing Distortion With Unipolar Hysteresis Current Control in Grid-Connected Inverter , 2013, IEEE Transactions on Industrial Electronics.

[8]  Hong-Hee Lee,et al.  Dual Three-Phase Indirect Matrix Converter With Carrier-Based PWM Method , 2014, IEEE Transactions on Power Electronics.

[9]  M. K. Hamzah,et al.  Safe-commutation strategy for controlled rectifier operation using single-phase matrix converter , 2009, 2009 International Conference on Power Electronics and Drive Systems (PEDS).

[10]  A. Saparon,et al.  Single-phase matrix converter operating as buck and boost rectifier , 2009, 2009 4th IEEE Conference on Industrial Electronics and Applications.

[11]  Rajesh Gupta,et al.  Unified time-domain formulation of switching frequency for hysteresis current controlled AC/DC and DC/AC grid connected converters , 2013 .

[12]  R. Blundell,et al.  AC-DC converter with unity power factor and minimum harmonic content of line current: design considerations , 1998 .

[13]  Zhaoan Wang,et al.  A Hysteresis Current Controller for Single-Phase Three-Level Voltage Source Inverters , 2012, IEEE Transactions on Power Electronics.

[14]  Chi-Seng Lam,et al.  Hysteresis current control of hybrid active power filters , 2012 .

[15]  R. Baharom,et al.  Boost rectifier using single-phase matrix converter , 2008, 2008 3rd IEEE Conference on Industrial Electronics and Applications.