Study of the knocking propensity of 2,5-dimethylfuran–gasoline and ethanol–gasoline blends

[1]  J. Yanowitz,et al.  Renewable Oxygenate Blending Effects on Gasoline Properties , 2011 .

[2]  M. Koike,et al.  Auto-ignition Characteristics of Biofuel Blends for SI Engines , 2011 .

[3]  Robert L. McCormick,et al.  Utilization of Renewable Oxygenates as Gasoline Blending Components , 2011 .

[4]  Bruce E Dale,et al.  Deconstruction of lignocellulosic biomass to fuels and chemicals. , 2011, Annual review of chemical and biomolecular engineering.

[5]  J. Zavala,et al.  Knock Detection and Estimation Based on Heat Release Strategies , 2011 .

[6]  Ronald T Raines,et al.  Conversion of fructose into 5-(hydroxymethyl)furfural in sulfolane. , 2011, ChemSusChem.

[7]  Juan Carlos Serrano-Ruiz,et al.  Catalytic conversion of renewable biomass resources to fuels and chemicals. , 2010, Annual review of chemical and biomolecular engineering.

[8]  Hongming Xu,et al.  Combustion and Emissions of 2,5-Dimethylfuran in a Direct-Injection Spark-Ignition Engine , 2010 .

[9]  Zuo-hua Huang,et al.  Identification of combustion intermediates in a low-pressure premixed laminar 2,5-dimethylfuran/oxygen/argon flame with tunable synchrotron photoionization , 2009 .

[10]  T. Foust,et al.  Technoeconomic analysis of the dilute sulfuric acid and enzymatic hydrolysis process for the conversion of corn stover to ethanol , 2009 .

[11]  Ronald T. Raines,et al.  Simple chemical transformation of lignocellulosic biomass into furans for fuels and chemicals. , 2009, Journal of the American Chemical Society.

[12]  Yuriy Román‐Leshkov,et al.  Production of dimethylfuran for liquid fuels from biomass-derived carbohydrates , 2007, Nature.

[13]  A. Corma,et al.  Synthesis of transportation fuels from biomass: chemistry, catalysts, and engineering. , 2006, Chemical reviews.

[14]  Jeffrey Naber,et al.  Analysis of Combustion Knock Metrics in Spark-Ignition Engines , 2006 .

[15]  Gautam Kalghatgi,et al.  Auto-Ignition Quality of Practical Fuels and Implications for Fuel Requirements of Future SI and HCCI Engines , 2005 .

[16]  R. French,et al.  Phase Equilibria of Ethanol Fuel Blends , 2005 .

[17]  Heather E. Dillon,et al.  A Fundamental Equation for Calculation of the Thermodynamic Properties of Ethanol , 2004 .

[18]  Guoming G. Zhu,et al.  Inaudible Knock and Partial-Burn Detection Using In-Cylinder Ionization Signal , 2003 .

[19]  Hans-Erik Ångström,et al.  Optimizing Engine Concepts by Using a Simple Model for Knock Prediction , 2003 .

[20]  Mohand Tazerout,et al.  A new indicator for knock detection in gas SI engines , 2003 .

[21]  Ulrich Spicher,et al.  Application of Different Cylinder Pressure Based Knock Detection Methods in Spark Ignition Engines , 2002 .

[22]  Antônio Moreira dos Santos,et al.  Identification and Quantification of Knock in Internal Combustion Engines using Spectral Analysis , 2001 .

[23]  Federico Millo,et al.  KNOCK IN S.I. ENGINES : A COMPARISON BETWEEN DIFFERENT TECHNIQUES FOR DETECTION AND CONTROL , 1998 .

[24]  John Biundo,et al.  Gasoline Engine Knock Analysis using Cylinder Pressure Data , 1998 .

[25]  Ingemar Denbratt,et al.  Comparison of Cylinder Pressure Based Knock Detection Methods , 1997 .

[26]  Paulius V. Puzinauskas,et al.  Examination of Methods Used to Characterize Engine Knock , 1992 .

[27]  John B. Heywood,et al.  Characterization of Knock in a Spark-Ignition Engine , 1989 .

[28]  John B. Heywood,et al.  Estimating Heat-Release and Mass-of-Mixture Burned from Spark-Ignition Engine Pressure Data , 1987 .

[29]  John B. Heywood,et al.  Heat Release Analysis of Engine Pressure Data , 1984 .

[30]  W. Leppard,et al.  Individual-Cylinder Knock Occurence and Intensity in Multicylinder Engines , 1982 .

[31]  I. Hunwartzen,et al.  Modification of CFR Test Engine Unit to Determine Octane Numbers of Pure Alcohols and Gasoline-Alcohol Blends , 1982 .

[32]  Donald L. Stivender,et al.  Development of a Fuel-Based Mass Emission Measurement Procedure , 1971 .

[33]  G. Woschni.  A Universally Applicable Equation for the Instantaneous Heat Transfer Coefficient in the Internal Combustion Engine , 1967 .

[34]  C. S. Draper,et al.  Pressure Waves Accompanying Detonation in the Internal Combustion Engine , 1938 .

[35]  S. Hannula,et al.  ASTM Special Technical Publication , 1986 .

[36]  F. H. Garner,et al.  The Blending Octane Numbers of Pure Hydrocarbons and their Dependence upon Concentration. , 1933 .

[37]  D. Clerk.  Investigations on gaseous explosions. Part II. Explosive reactions considered in reference to internal combustion engines. Introductory survey , 1926 .