After the nuclear accidents of Three Mile Island and Chernobyl the world nuclear community made great efforts to increase research on nuclear reactors and to develop advanced nuclear power plants with much improved safety features. Following the successful construction and a most gratifying operation of the 10 MWth high-temperature gas-cooled test reactor (HTR-10), the Institute of Nuclear and New Energy Technology (INET) of Tsinghua University has developed and designed an HTR demonstration plant, called the HTR-PM (high-temperature-reactor pebble-bed module). The design, having jointly been carried out with industry partners from China and in collaboration of experts worldwide, closely follows the design principles of the HTR-10.
Due to intensive engineering and R&D efforts since 2001, the basic design of the HTR-PM has been finished while all main technical features have been fixed. A Preliminary Safety Analysis Report (PSAR) has been compiled.
The HTR-PM plant will consist of two nuclear steam supply system (NSSS), so called modules, each one comprising of a single zone 250 MWth pebble-bed modular reactor and a steam generator. The two NSSS modules feed one steam turbine and generate an electric power of 210 MW.
A pilot fuel production line will be built to fabricate 300,000 pebble fuel elements per year. This line is closely based on the technology of the HTR-10 fuel production line.
The main goals of the project are two-fold. Firstly, the economic competitiveness of commercial HTR-PM plants shall be demonstrated. Secondly, it shall be shown that HTR-PM plants do not need accident management procedures and will not require any need for offsite emergency measures.
According to the current schedule of the project the completion date of the demonstration plant will be around 2013. The reactor site has been evaluated and approved; the procurement of long-lead components has already been started.
After the successful operation of the demonstration plant, commercial HTR-PM plants are expected to be built at the same site. These plants will comprise many NSSS modules and, correspondingly, a larger turbine.
[1]
Zongxin Wu,et al.
The design features of the HTR-10
,
2002
.
[2]
Suyuan Yu,et al.
Future HTGR developments in China after the criticality of the HTR-10
,
2002
.
[3]
Doug Vandel,et al.
Next Generation Nuclear Plant Pre-Conceptual Design Report
,
2007
.
[4]
Zuoyi Zhang,et al.
Economic potential of modular reactor nuclear power plants based on the Chinese HTR-PM project
,
2007
.
[5]
H. Reutler,et al.
Advantages of going modular in HTRs
,
1984
.
[6]
Fu Li,et al.
Design aspects of the Chinese modular high-temperature gas-cooled reactor HTR-PM
,
2006
.