Improving performance using cascade control and a Smith predictor.

Many investigations have been done on tuning proportional-integral-derivative (PID) controllers in single-input single-output (SISO) systems. However, only a few investigations have been carried out on tuning PID controllers in cascade control systems. In this paper, a new approach, namely the use of a Smith predictor in the outer loop of a cascade control system, is investigated. The method can be used in temperature control problems where the secondary part of the process (the inner loop) may have a negligible delay while the primary loop (the outer loop) has a time-delay. Two different approaches, including an autotuning method, to find the controller parameters are proposed. It is shown by some examples that the proposed structure as expected can provide better performance than conventional cascade control, a Smith predictor scheme or single feedback control system.

[1]  D. P. Atherton,et al.  Tuning PID controllers with integral performance criteria , 1991 .

[2]  Thomas F. Edgar,et al.  Process Dynamics and Control , 1989 .

[3]  C. Hang,et al.  Refinements of the Ziegler-Nichols tuning formula , 1991 .

[4]  Tore Hägglund,et al.  Automatic tuning of simple regulators with specifications on phase and amplitude margins , 1984, Autom..

[5]  Chi‐Tsung Huang,et al.  An automatic pid controller tuning method by frequency response techniques , 1997 .

[6]  O. J. M. Smith,et al.  A controller to overcome dead time , 1959 .

[7]  Feng-Sheng Wang,et al.  OPTIMAL TUNING OF PID CONTROLLERS FOR SINGLE AND CASCADE CONTROL LOOPS , 1995 .

[8]  Ai Poh Loh,et al.  Relay feedback auto-tuning of cascade controllers , 1994, IEEE Trans. Control. Syst. Technol..

[9]  D. P. Atherton,et al.  Optimum cascade PID controller design for SISO systems , 1994 .

[10]  Sunwon Park,et al.  PID controller tuning to obtain desired closed loop responses for cascade control systems , 1998 .

[11]  P. Atkinson,et al.  Process Control Systems , 1968 .

[12]  Derek P. Atherton,et al.  An improved parameter estimation method using limit cycle data , 1998 .

[13]  D. P. Atherton,et al.  Automatic tuning of optimum PID controllers , 1993 .

[14]  Ernest F. Johnson.  Automatic Process Control , 1958 .

[15]  R. G. Franks,et al.  Quantitative Analysis of Cascade Control , 1956 .

[16]  J. G. Ziegler,et al.  Optimum Settings for Automatic Controllers , 1942, Journal of Fluids Engineering.