Lightweight multiscale hybrid carbon-quartz fiber fabric reinforced phenolic-silica aerogel nanocomposite for high temperature thermal protection

[1]  Obinna Uyanna,et al.  Thermal protection systems for space vehicles: A review on technology development, current challenges and future prospects , 2020 .

[2]  Xingrong Zeng,et al.  An ultrasensitive fire-warning chitosan/montmorillonite/carbon nanotube composite aerogel with high fire-resistance , 2020 .

[3]  Xiangyun Song,et al.  Preparation and Performance of Porous Carbon Nanocomposite from Renewable Phenolic Resin and Halloysite Nanotube , 2020, Nanomaterials.

[4]  Maoyuan Li,et al.  Coupled ablation and thermal behavior of an all-composite structurally integrated thermal protection system: Fabrication and modeling , 2020 .

[5]  Y. Kubota,et al.  Thermal Protection Performance of Polymethylmethacrylate-Impregnated Porous Carbon Materials with Three Different Densities , 2020 .

[6]  Jun Liang,et al.  Preparation and characterization of organic-inorganic hybrid ZrOC/PF aerogel used as high-temperature insulator , 2020, Ceramics International.

[7]  Graeme J. Kennedy,et al.  Constitutive Model of Fiber Substrate Ablators for Conceptual Design , 2020 .

[8]  Maoyuan Li,et al.  Thermal decomposition behavior of a thermal protection coating composite with silicone rubber: Experiment and modeling , 2020 .

[9]  Alexandre Martin,et al.  Thermal Expansion for Charring Ablative Materials , 2020 .

[10]  Shuhong Yu,et al.  Temperature‐Invariant Superelastic and Fatigue Resistant Carbon Nanofiber Aerogels , 2019, Advanced materials.

[11]  B. Kandasubramanian,et al.  Advances in Ablative Composites of Carbon Based Materials: A Review , 2019 .

[12]  Runjun Sun,et al.  Enhanced mechanical and electromagnetic properties of polymer composite with 2.5D novel carbon/quartz fiber core-spun yarn woven fabric , 2019, Journal of Industrial Textiles.

[13]  Zhaofeng Chen,et al.  Preparation and characterization of ultralight glass fiber wool/phenolic resin aerogels with a spring-like structure , 2019, Composites Science and Technology.

[14]  Robert D. Braun,et al.  Mission Design and Performance Analysis of a Smallsat Aerocapture Flight Test , 2019, Journal of Spacecraft and Rockets.

[15]  Shuhong Yu,et al.  Superelastic Hard Carbon Nanofiber Aerogels , 2019, Advanced materials.

[16]  L. Bergström,et al.  Fire-Retardant and Thermally Insulating Phenolic-Silica Aerogels. , 2018, Angewandte Chemie.

[17]  Xinghong Zhang,et al.  Synthesis and characterization of novel phenolic resin/silicone hybrid aerogel composites with enhanced thermal, mechanical and ablative properties , 2017 .

[18]  J. Kenny,et al.  Microstructure and ablation behavior of an affordable and reliable nanostructured Phenolic Impregnated Carbon Ablator (PICA) , 2017 .

[19]  Xinghong Zhang,et al.  Preparation, mechanical, thermal and ablative properties of lightweight needled carbon fibre felt/phenolic resin aerogel composite with a bird's nest structure , 2017 .

[20]  J. Kenny,et al.  Science and technology of polymeric ablative materials for thermal protection systems and propulsion devices: A review , 2016 .

[21]  Jitong Wang,et al.  Strong and machinable carbon aerogel monoliths with low thermal conductivity prepared via ambient pressure drying , 2016 .

[22]  Annick Hubin,et al.  Experimental investigation of ablation and pyrolysis processes of carbon-phenolic ablators in atmospheric entry plasmas , 2016 .

[23]  H. Roghani‐Mamaqani,et al.  Organic–inorganic nanohybrids of novolac phenolic resin and carbon nanotube: High carbon yields by using carbon nanotube aerogel and resin incorporation into aerogel network , 2016 .

[24]  H. Roghani‐Mamaqani,et al.  Novolac phenolic resin and graphene aerogel organic-inorganic nanohybrids: High carbon yields by resin modification and its incorporation into aerogel network , 2016 .

[25]  Huaihe Song,et al.  Highly flexible silica aerogels derived from methyltriethoxysilane and polydimethylsiloxane , 2015 .

[26]  Xinli Jing,et al.  The thermal stability and pyrolysis mechanism of boron-containing phenolic resins: The effect of phenyl borates on the char formation , 2015 .

[27]  K. Balasubramanian,et al.  Cost-effective, low density, carbon soot doped resorcinol formaldehyde composite for ablative applications , 2015 .

[28]  T. Minton,et al.  Pyrolysis of phenolic impregnated carbon ablator (PICA). , 2015, ACS applied materials & interfaces.

[29]  S. Xing,et al.  Microstructural interpretation of the ablative properties of phenolic–quartz hybrid fabric reinforced phenolic resin composites , 2014 .

[30]  Yanfeng Gao,et al.  Ambient-pressure drying synthesis of large resorcinol–formaldehyde-reinforced silica aerogels with enhanced mechanical strength and superhydrophobicity , 2014 .

[31]  M. Akbari,et al.  Effect of nanosilica on the microstructure, thermal properties and bending strength of nanosilica modified carbon fiber/phenolic nanocomposite , 2014 .

[32]  D. Loy,et al.  Modification of a Phenolic Resin with Epoxy- and Methacrylate-Functionalized Silica Sols to Improve the Ablation Resistance of Their Glass Fiber-Reinforced Composites , 2014 .

[33]  J. Tirillò,et al.  Carbon-phenolic ablative materials for re-entry space vehicles: Manufacturing and properties , 2010 .

[34]  Mario Marchetti,et al.  A probabilistic sizing tool and Monte Carlo analysis for entry vehicle ablative thermal protection systems , 2010 .

[35]  B. Laub,et al.  Arcjet Screening of Candidate Ablative Thermal Protection Materials for Mars Science Laboratory , 2006 .

[36]  James A. Ritter,et al.  Preparation and Properties of Resorcinol–Formaldehyde Organic and Carbon Gels , 2003 .

[37]  P. Gnoffo.  Planetary-Entry Gas Dynamics , 1999 .

[38]  Huy K. Tran,et al.  Development of lightweight ceramic ablators and arc-jet test results , 1994 .

[39]  J. Howe.  Hypervelocity atmospheric flight: Real gas flow fields , 1989 .