Potential of Solar Collectors for Clean Thermal Energy Production in Smart Cities using Nanofluids: Experimental Assessment and Efficiency Improvement

In this article, an experimental study was performed to assess the potential thermal application of a new nanofluid comprising carbon nanoparticles dispersed in acetone inside an evacuated tube solar thermal collector. The effect of various parameters including the circulating volumetric flow of the collector, mass fraction of the nanoparticles, the solar irradiance, the tilt angle and the filling ratio values of the heat pipes on the thermal performance of the solar collector was investigated. It was found that with an increase in the flow rate of the working fluid within the system, the thermal efficiency of the system was improved. Additionally, the highest thermal performance and the highest temperature difference between the inlet and the outlet ports of the collector were achieved for the nanofluid at wt. % = 0.1. The best tilt angle and the filling ratio values of the collector were 30° and 60% and the maximum thermal efficiency of the collector was 91% for a nanofluid at wt. % = 0.1 and flow rate of 3 L/min.

[1]  Mohammad Mohsen Sarafraz,et al.  Flow boiling heat transfer to MgO-therminol 66 heat transfer fluid: Experimental assessment and correlation development , 2018, Applied Thermal Engineering.

[2]  Maziar Arjomandi,et al.  Thermal performance analysis of a microchannel heat sink cooling with copper oxide-indium (CuO/In) nano-suspensions at high-temperatures , 2018, Applied Thermal Engineering.

[3]  Saad Mekhilef,et al.  Energy performance of an evacuated tube solar collector using single walled carbon nanotubes nanofluids , 2015 .

[4]  Alexander V. Neimark,et al.  Quenched solid density functional theory method for characterization of mesoporous carbons by nitrogen adsorption , 2012 .

[5]  Mohammad Mohsen Sarafraz,et al.  Thermal performance of a heat sink microchannel working with biologically produced silver-water nanofluid: Experimental assessment , 2018 .

[6]  Ahmet Ozsoy,et al.  Thermal performance of a thermosyphon heat pipe evacuated tube solar collector using silver-water nanofluid for commercial applications , 2018, Renewable Energy.

[7]  Sarit K. Das,et al.  Heat Transfer in Nanofluids—A Review , 2006 .

[8]  Anuar Shahrani,et al.  Performance of Evacuated Tube Solar Collector using Water-Based Titanium Oxide Nanofluid , 2012 .

[9]  Gyula Gróf,et al.  Efficiency of evacuated tube solar collector using WO3/Water nanofluid , 2019, Renewable Energy.

[10]  Robert J. Moffat,et al.  Describing the Uncertainties in Experimental Results , 1988 .

[11]  Mohammad Mohsen Sarafraz,et al.  Thermal behavior of aqueous iron oxide nano-fluid as a coolant on a flat disc heater under the pool boiling condition , 2017 .

[12]  W. Roetzel,et al.  Conceptions for heat transfer correlation of nanofluids , 2000 .

[13]  S. M. Peyghambarzadeh,et al.  Thermal performance and efficiency of a thermosyphon heat pipe working with a biologically ecofriendly nanofluid , 2014 .

[14]  Maziar Arjomandi,et al.  Thermal and hydraulic analysis of a rectangular microchannel with gallium-copper oxide nano-suspension , 2018, Journal of Molecular Liquids.

[15]  E. Teller,et al.  ADSORPTION OF GASES IN MULTIMOLECULAR LAYERS , 1938 .

[16]  Mohammad Mohsen Sarafraz,et al.  Nucleate pool boiling heat transfer of binary nano mixtures under atmospheric pressure around a smooth horizontal cylinder , 2013 .

[17]  Mohammad Mohsen Sarafraz,et al.  Role of nanofluid fouling on thermal performance of a thermosyphon: Are nanofluids reliable working fluid? , 2015 .

[18]  Mohammad Mohsen Sarafraz,et al.  Experimental Investigation on Pool Boiling Heat Transfer to Formic Acid, Propanol and 2-Butanol Pure Liquids under the Atmospheric Pressure , 2013 .

[19]  Mohammad Mohsen Sarafraz,et al.  Heat transfer, pressure drop and fouling studies of multi-walled carbon nanotube nano-fluids inside a plate heat exchanger , 2016 .

[20]  Mohammad Mohsen Sarafraz,et al.  Nucleate Pool Boiling Heat Transfer to Al2O3-Water and TiO2-Water Nanofluids on Horizontal Smooth Tubes with Dissimilar Homogeneous Materials , 2012 .

[21]  F. Hormozi,et al.  Experimental study on the thermal performance and efficiency of a copper made thermosyphon heat pipe charged with alumina–glycol based nanofluids , 2014 .

[22]  L. Tadrist,et al.  A review on boiling heat transfer enhancement with nanofluids , 2011, Nanoscale research letters.

[23]  Mohammad Mohsen Sarafraz,et al.  Application of Spherical Copper Oxide (II) Water Nano-fluid as a Potential Coolant in a Boiling Annular Heat Exchanger , 2015 .

[24]  Mohammad Mohsen Sarafraz,et al.  Upward Flow Boiling to DI-Water and Cuo Nanofluids Inside the Concentric Annuli , 2015 .

[25]  Mohammad Hossein Ahmadi,et al.  Experimental investigation of graphene oxide nanofluid on heat transfer enhancement of pulsating heat pipe , 2018 .

[26]  Cengiz Yildiz,et al.  Thermal performance enhancement of flat-plate solar collectors by means of three different nanofluids , 2018, Thermal Science and Engineering Progress.

[27]  Feng Zhao,et al.  Thermal performance of an open thermosyphon using nanofluid for evacuated tubular high temperature air solar collector , 2013 .

[28]  Mohammad Reza Safaei,et al.  Diurnal thermal evaluation of an evacuated tube solar collector (ETSC) charged with graphene nanoplatelets-methanol nano-suspension , 2019, Renewable Energy.

[29]  M. Sarafraz,et al.  Thermal performance analysis of a flat heat pipe working with carbon nanotube-water nanofluid for cooling of a high heat flux heater , 2018 .

[30]  Ping-Hei Chen,et al.  Effect of structural character of gold nanoparticles in nanofluid on heat pipe thermal performance , 2004 .

[31]  Maziar Arjomandi,et al.  Demonstration of plausible application of gallium nano-suspension in microchannel solar thermal receiver: Experimental assessment of thermo-hydraulic performance of microchannel , 2018 .

[32]  Arun Kumar Tiwari,et al.  Progress of nanofluid application in solar collectors: A review , 2015 .

[33]  Mohammad Mohsen Sarafraz,et al.  Low-frequency vibration for fouling mitigation and intensification of thermal performance of a plate heat exchanger working with CuO/water nanofluid , 2017 .

[34]  Mohammad Mohsen Sarafraz,et al.  Green synthesis of silver nanoparticles using green tea leaves: Experimental study on the morphological, rheological and antibacterial behaviour , 2017 .

[35]  Patrick E. Phelan,et al.  Pool boiling of nanofluids: Comprehensive review of existing data and limited new data , 2009 .

[36]  Shung-Wen Kang,et al.  Experimental investigation of silver nano-fluid on heat pipe thermal performance , 2006 .

[37]  S. M. You,et al.  Pool boiling characteristics of low concentration nanofluids , 2010 .

[38]  Maziar Arjomandi,et al.  Experimental thermal energy assessment of a liquid metal eutectic in a microchannel heat exchanger equipped with a (10 Hz/50 Hz) resonator , 2019, Applied Thermal Engineering.

[39]  Gyula Gróf,et al.  Evacuated tube solar collector performance using CeO2/water nanofluid , 2018, Journal of Cleaner Production.

[40]  G. Kumaresan,et al.  Thermal characteristics studies on sintered wick heat pipe using CuO and Al2O3 nanofluids , 2016 .

[41]  Mostafa Zamani Mohiabadi,et al.  Experimental investigation of heat pipe solar collector using MgO nanofluids , 2019, Solar Energy Materials and Solar Cells.