High-quality near-field optical probes by tube etching

A method called tube etching for the fabrication of near-field optical probes is presented. Tip formation occurs inside a cylindrical cavity formed by the polymer coating of an optical fiber which is not stripped away prior to etching in hydrofluoric acid. The influence of temperature, etchant concentration, and fiber type on the tip quality is studied. A tip formation mechanism for the given geometry is proposed. The procedure overcomes drawbacks of the conventional etching techniques while still producing large cone angles: (i) tips with reproducible shapes are formed in a high yield, (ii) the surface roughness on the taper is drastically reduced, and (iii) the tip quality is insensitive to vibrations and temperature fluctuations during the etching process. After aluminum coating, optical probes with well-defined apertures are obtained. Due to the smooth glass surface the aluminum coating is virtually free of pinholes.

[1]  D. Naumann.  Fluor und Fluorverbindungen , 1980 .

[2]  Dieter W. Pohl.  Scanning Near-field Optical Microscopy (SNOM) , 1991 .

[3]  Motoichi Ohtsu,et al.  INCREASING THROUGHPUT OF A NEAR-FIELD OPTICAL FIBER PROBE OVER 1000 TIMES BY THE USE OF A TRIPLE-TAPERED STRUCTURE , 1998 .

[4]  E. Oesterschulze,et al.  Novel micromachined cantilever sensors for scanning near‐field optical microscopy , 1997 .

[5]  E. Betzig,et al.  Combined shear force and near‐field scanning optical microscopy , 1992 .

[6]  M. Pfeffer,et al.  Chemically etched fiber tips for near-field optical microscopy: a process for smoother tips. , 1998, Applied optics.

[7]  D. Pohl,et al.  Scanning near-field optical probe with ultrasmall spot size. , 1995, Optics letters.

[8]  Patrik Hoffmann,et al.  Comparison of mechanically drawn and protection layer chemically etched optical fiber tips , 1995 .

[9]  D. Palanker,et al.  Etched chalcogenide fibers for near-field infrared scanning microscopy , 1998 .

[10]  G. H. Morrison,et al.  Parameter control, characterization, and optimization in the fabrication of optical fiber near-field probes. , 1995, Applied optics.

[11]  D. Zeisel,et al.  Pulsed laser‐induced desorption and optical imaging on a nanometer scale with scanning near‐field microscopy using chemically etched fiber tips , 1996 .

[12]  N. F. Hulst,et al.  High definition aperture probes for near-field optical microscopy fabricated by focused ion beam milling , 1998 .

[13]  Wilfried Noell,et al.  Micromachined aperture probe tip for multifunctional scanning probe microscopy , 1997 .

[14]  T. D. Harris,et al.  Breaking the Diffraction Barrier: Optical Microscopy on a Nanometric Scale , 1991, Science.