Influence of Elastomer Layers in the Quality of Aluminum Parts on Finishing Operations

This research was funded by Basque Government (Eusko Jaurlaritza) under the ELKARTEK Program, SMAR3NAK project, grant number KK-2019/00051.

[1]  Neil D. Sims,et al.  Milling workpiece chatter avoidance using piezoelectric active damping: a feasibility study , 2005 .

[2]  Qiang Liu,et al.  Design of a passive damper with tunable stiffness and its application in thin-walled part milling , 2017 .

[3]  A. R. Albooyeh,et al.  The effect of addition of Multiwall Carbon Nanotubes on the vibration properties of Short Glass Fiber reinforced polypropylene and polypropylene foam composites , 2019, Polymer Testing.

[4]  Toshio Nishi,et al.  Natural rubber/nitrile butadiene rubber/hindered phenol composites with high-damping properties , 2015 .

[5]  L. Mullins.  Softening of Rubber by Deformation , 1969 .

[6]  Yusuf Altintas,et al.  Analytical Prediction of Stability Lobes in Milling , 1995 .

[7]  A. J. Gámez,et al.  Effects of Machining Parameters on the Quality in Machining of Aluminium Alloys Thin Plates , 2019, Metals.

[8]  Kristoffer Almdal,et al.  A novel method for monitoring chemical degradation of crosslinked rubber by stress relaxation under tension , 2006 .

[9]  Wei-Yao Hsu,et al.  Characterizations and models for the thermal growth of a motorized high speed spindle , 2003 .

[10]  Yusuf Altintas,et al.  Mechanics and dynamics of general milling cutters.: Part I: helical end mills , 2001 .

[11]  Chen Bing,et al.  Vibration suppression of thin-walled workpiece machining considering external damping properties based on magnetorheological fluids flexible fixture , 2016 .

[12]  Svetan Ratchev,et al.  Milling error prediction and compensation in machining of low-rigidity parts , 2004 .

[13]  Neil D. Sims,et al.  Analysis of Process Damping in Milling , 2016 .

[14]  Jorge Salguero,et al.  Tool-path effect on the geometric deviations in the machining of UNS A92024 aeronautic skins , 2017 .

[15]  Nuodi Huang,et al.  Adaptive machining for curved contour on deformed large skin based on on-machine measurement and isometric mapping , 2019, International Journal of Machine Tools and Manufacture.

[16]  Min Wang,et al.  Chatter suppression based on nonlinear vibration characteristic of electrorheological fluids , 1999 .

[17]  Chao Yu Huang,et al.  A pole/zero cancellation approach to reducing forced vibration in end milling , 2010 .

[18]  Yusuf Altintas,et al.  Analytical Prediction of Three Dimensional Chatter Stability in Milling , 2001 .

[19]  Per Erik Austrell,et al.  Modelling procedures and properties of rubber in rolling contact , 2013 .

[20]  Dragos Axinte,et al.  Novel ancillary device for minimising machining vibrations in thin wall assemblies , 2014 .

[21]  S Herranz,et al.  The milling of airframe components with low rigidity: A general approach to avoid static and dynamic problems , 2005 .

[22]  S. C. Shit,et al.  A Review on Silicone Rubber , 2013 .

[23]  Steven Y. Liang,et al.  A review of chatter vibration research in milling , 2019, Chinese Journal of Aeronautics.

[24]  Cristina R. G. Furtado,et al.  Stress relaxation of nitrile rubber composites filled with a hybrid metakaolin/carbon black filler under tensile and compressive forces , 2018 .

[25]  Prasanth Kumar Mallipudi,et al.  Effect of Carbon Black on the Performance of Nitrile Rubber For Analyzing Free Layered Surface Damping Treatment , 2019, Materials Today: Proceedings.

[26]  Junz Jiunn-jyh Wang,et al.  Effects of cutting conditions on dynamic cutting factor and process damping in milling , 2011 .

[27]  A. J. Gámez,et al.  Thin-Wall Machining of Light Alloys: A Review of Models and Industrial Approaches , 2019, Materials.

[28]  Mahdi Eynian,et al.  Vibration frequencies in stable and unstable milling , 2015 .

[29]  Yang Liu,et al.  Analysis and implementation of chatter frequency dependent constrained layer damping tool holder for stability improvement in turning process , 2019, Journal of Materials Processing Technology.

[30]  Aitzol Lamikiz,et al.  Recording of real cutting forces along the milling of complex parts , 2006 .

[31]  D. Chung.  Review: Materials for vibration damping , 2001 .

[32]  Bin Lin,et al.  Chatter mitigation using moving damper , 2017 .

[33]  Koji Fujimoto,et al.  Direct measurement of high-frequency viscoelastic properties of pre-deformed rubber , 2018 .

[34]  Yiqing Yang,et al.  Milling vibration attenuation by eddy current damping , 2015 .

[35]  Aitzol Lamikiz Mentxaka,et al.  CAPACITACIÓN DE UTILLAJES FLEXIBLES PARA SU USO EN PROCESOS DE MECANIZADO DE ALTA CALIDAD: UN CASO DE APLICACIÓN DEL PARADIGMA INDUSTRIA 4.0 , 2018 .

[36]  Daisuke Kono,et al.  Design of a support system with a pivot mechanism for suppressing vibrations in thin-wall milling , 2017 .

[37]  Jianbin Xue,et al.  Deformation prediction and error compensation in multilayer milling processes for thin-walled parts , 2009 .

[38]  Marco Amabili,et al.  Identification of the viscoelastic response and nonlinear damping of a rubber plate in nonlinear vibration regime , 2018, Mechanical Systems and Signal Processing.

[39]  Catalin Teodoriu,et al.  Review of elastomer seal assemblies in oil & gas wells: Performance evaluation, failure mechanisms, and gaps in industry standards , 2019, Journal of Petroleum Science and Engineering.

[40]  Anders K Olsson.  Finite Element Procedures in Modelling the Dynamic Properties of Rubber , 2007 .

[41]  Dragos Axinte,et al.  State-of-the-art in fixture systems for the manufacture and assembly of rigid components: A review , 2017 .

[42]  Changfeng Ge,et al.  Impact damping ratio of a nonlinear viscoelastic foam , 2018, Polymer Testing.

[43]  Mikel Cuesta Zabaljauregui,et al.  Effect of cutting speed on the surface integrity of face milled 7050-T7451 aluminium workpieces , 2018 .

[44]  Yiqing Yang,et al.  Five-axis milling vibration attenuation of freeform thin-walled part by eddy current damping , 2018 .

[45]  Francisco J. Campa,et al.  Chatter avoidance in the milling of thin floors with bull-nose end mills: Model and stability diagrams , 2011 .