Quotient Kinematics Machines: Concept, Analysis, and Synthesis

[1]  Hui Zhao,et al.  New kinematic structures for 2-, 3-, 4-, and 5-DOF parallel manipulator designs , 2002 .

[2]  Z. Huang,et al.  Type Synthesis of Symmetrical Lower-Mobility Parallel Mechanisms Using the Constraint-Synthesis Method , 2003, Int. J. Robotics Res..

[3]  Qinchuan Li,et al.  1T2R Parallel Mechanisms Without Parasitic Motion , 2010, IEEE Transactions on Robotics.

[4]  J. M. Hervé,et al.  Asymmetrical three-DOFs rotational-translational parallel-kinematics mechanisms based on lie group theory , 2006 .

[5]  W. Boothby.  An introduction to differentiable manifolds and Riemannian geometry , 1975 .

[6]  Liping Wang,et al.  Kinematic Analysis of the SPKM165, a 5-Axis Serial-Parallel Kinematic Milling Machine , 2009, ICIRA.

[7]  C. Gosselin,et al.  Advantages of the modified Euler angles in the design and control of PKMs , 2002 .

[8]  Xianwen Kong,et al.  Type Synthesis of 3-DOF Translational Parallel Manipulators Based on Screw Theory , 2004 .

[9]  J. P. Merlet,et al.  Parallel Robots (Solid Mechanics and Its Applications) , 2006 .

[10]  J. M. Hervé,et al.  Asymmetrical 3-dof spherical parallel mechanisms , 2005 .

[11]  J. M. Hervé,et al.  Translational parallel manipulators with doubly planar limbs , 2006 .

[12]  J. M. Hervé,et al.  Structural synthesis of 'parallel' robots generating spatial translation , 1991, Fifth International Conference on Advanced Robotics 'Robots in Unstructured Environments.

[13]  Richard M. Murray,et al.  A Mathematical Introduction to Robotic Manipulation , 1994 .

[14]  Lung-Wen Tsai,et al.  Kinematic Analysis of 3-DOF Position Mechanisms for Use in Hybrid Kinematic Machines , 2002 .

[15]  Qinchuan Li,et al.  Type synthesis of 3R2T 5-DOF parallel mechanisms using the Lie group of displacements , 2004, IEEE Transactions on Robotics and Automation.

[16]  J-Y Hascoët,et al.  VERNE - a five-axis parallel kinematics milling machine , 2005 .

[17]  Zexiang Li,et al.  Quotient kinematics machines: Concept, analysis and synthesis , 2010, ICRA.

[18]  Zexiang Li,et al.  Quotient kinematics machines: Concept, analysis and synthesis , 2008, 2010 IEEE International Conference on Robotics and Automation.

[19]  Yuefa Fang,et al.  Structure Synthesis of a Class of 4-DoF and 5-DoF Parallel Manipulators with Identical Limb Structures , 2002, Int. J. Robotics Res..

[20]  J. M. Hervé.  The Lie group of rigid body displacements, a fundamental tool for mechanism design , 1999 .

[21]  Pavel Winternitz,et al.  Subgroups of the Euclidean group and symmetry breaking in nonrelativistic quantum mechanics , 1977 .

[22]  C. Gosselin,et al.  Type Synthesis of 3-DOF Spherical Parallel Manipulators Based on Screw Theory , 2004 .

[23]  Clément Gosselin,et al.  Type synthesis of 3T1R 4-DOF parallel manipulators based on screw theory , 2004, IEEE Transactions on Robotics and Automation.

[24]  Zexiang Li,et al.  A Geometric Theory for Analysis and Synthesis of Sub-6 DoF Parallel Manipulators , 2007, IEEE Transactions on Robotics.

[25]  Mark Elling Rosheim,et al.  New high-angulation omni-directional sensor mount , 2002, SPIE Optics + Photonics.

[26]  Erik L.J. Bohez,et al.  Five-axis milling machine tool kinematic chain design and analysis , 2002 .

[27]  Hieu Minh Trinh,et al.  Two-mode overconstrained three-DOFs rotational-translational linear-motor-based parallel-kinematics mechanism for machine tool applications , 2007, Robotica.

[28]  Xianwen Kong,et al.  Type synthesis of 5-DOF parallel manipulators based on screw theory , 2005 .

[29]  C. Gosselin,et al.  Type Synthesis of Parallel Mechanisms With Multiple Operation Modes , 2007 .

[30]  J. M. Hervé,et al.  Displacement manifold method for type synthesis of lower-mobility parallel mechanisms , 2004 .