Steam reforming of methane in equilibrium membrane reactors for integration in power cycles

Abstract Methane steam reforming is the most important industrial route to produce H2. The process is governed by equilibrium reactions, the overall process is endothermic and high temperatures are required to reach satisfactory methane conversions. The possibility of using a membrane reactor, which separates H2 from the reaction zone with a subsequent improvement of the conversions, is a challenge of many academic and industrial researchers. A great effort of membrane reactor analysis applied to steam reforming is necessary in the light of the novel and potential process applications (fuel cells, CO2 capture). This paper presents the model of a non-adiabatic methane steam reformer membrane reactor (MSRMR) working in equilibrium conditions. The model was used to investigate the effects of some variables (e.g. temperature profile, separation efficiency, plant size) on the membrane area and the energy required by the process, which in turn affect fixed and operating costs. The simulations showed that the membrane area required sharp increases in the reactor size and that for large plants the development of thin and permeable membranes is a key issue.

[1]  B. Morreale,et al.  The permeability of hydrogen in bulk palladium at elevated temperatures and pressures , 2003 .

[2]  Fausto Gallucci,et al.  A simulation study of the steam reforming of methane in a dense tubular membrane reactor , 2004 .

[3]  A. Abrashkevich,et al.  CANM, a program for numerical solution of a system of nonlinear equations using the continuous analog of Newton's method , 2004 .

[4]  Enrico Drioli,et al.  Conversion−Temperature Diagram for a Palladium Membrane Reactor. Analysis of an Endothermic Reaction: Methane Steam Reforming , 2001 .

[5]  Akira Endo,et al.  Simulation of a Porous Ceramic Membrane Reactor for Hydrogen Production , 2005 .

[6]  R. Hughes,et al.  The kinetics of methane steam reforming over a Ni/α-Al2O catalyst , 2001 .

[7]  Toshinori Tsuru,et al.  Methane steam reforming by microporous catalytic membrane reactors , 2004 .

[8]  Olav Bolland,et al.  Integration of H2-separating membrane technology in gas turbine processes for CO2 capture , 2004 .

[9]  Olav Bolland,et al.  High-temperature membranes in power generation with CO2 capture , 2004 .

[10]  François Maréchal,et al.  Optimization of a fuel cell system using process integration techniques , 2003 .

[11]  E. Johannessen,et al.  Study of a H2 separating membrane reactor for methane steam reforming at conditions relevant for power processes with CO2 capture , 2005 .

[12]  J. Grotendorst,et al.  Computer-aided modelling and simulation of the thermodynamics of stream reforming , 2000 .

[13]  Mordechai Shacham,et al.  Numerical solution of constrained non‐linear algebraic equations , 1986 .

[14]  Enrico Drioli,et al.  Equilibrium conversion for a Pd-based membrane reactor. Dependence on the temperature and pressure , 2003 .

[15]  Savvas Vasileiadis,et al.  Efficient catalytic reactors-processors for fuel cells and synthesis applications , 2004 .