Minimum passive components based lossy and lossless inductor simulators employing a new active block

Abstract In this paper a new active element namely Dual X current conveyor differential input transconductance amplifier (DXCCDITA) is proposed. The DXCCDITA is utilized in designing eight topologies of lossy and lossless grounded inductor simulators and two topologies of floating inductor simulators. All the designed grounded simulators require only two passive elements and a single active block. The two floating inductor simulators require a single active block and one or three grounded passive elements. In addition, all the designs make use of only grounded capacitors for implementation which is advantageous for fabrication. All the proposed active inductors, except two, did not require any component matching conditions for realization and all the inductor simulators are perfectly tunable. The effect of non-idealities on the proposed grounded simulator structures is also studied. To demonstrate the workability of the inductor simulators they are used in design of second order low pass filter, parallel RLC resonance circuit, third order Butterworth high pass filter, parallel RLC current mode multifunction filter and a voltage mode band pass filter. The DXCCDITA is implemented in 0.35 μm TSMC CMOS technology parameters and tested in Tanner EDA. Sufficient number of simulations are provided to establish the functionality of the active inductor structures.

[1]  Erkan Yuce,et al.  On the implementation of the floating simulators employing a single active device , 2007 .

[2]  Jiun-Wei Horng,et al.  DCCII-Based Novel Lossless Grounded Inductance Simulators With No Element Matching Constrains , 2014 .

[3]  Indrit Myderrizi,et al.  Electronically tunable DXCCII-based grounded capacitance multiplier , 2014 .

[4]  Data Ram Bhaskar,et al.  New Grounded and Floating Simulated Inductance Circuits using Current Differencing Transconductance Amplifiers , 2010 .

[5]  Oguzhan Cicekoglu,et al.  A novel floating lossy inductance realization topology with NICs using current conveyors , 2006, IEEE Transactions on Circuits and Systems II: Express Briefs.

[6]  Shen-Iuan Liu,et al.  Higher-order immittance function synthesis using CCIIIs , 1996 .

[7]  Herman Sedef,et al.  A New Floating Inductor Circuit Using Differential Voltage Current Conveyors , 2000 .

[8]  Shahram Minaei,et al.  Limitations of the Simulated Inductors Based on a Single Current Conveyor , 2006, IEEE Transactions on Circuits and Systems I: Regular Papers.

[9]  Worapong Tangsrirat.  Synthetic Grounded Lossy Inductance Simulators Using Single VDIBA , 2017 .

[10]  Erkan Yuce.  Novel lossless and lossy grounded inductor simulators consisting of a canonical number of components , 2009 .

[11]  Surapong Siripongdee,et al.  Electronically controllable grounded inductance simulators using single commercially available IC: LT1228 , 2017 .

[12]  Raj Senani,et al.  New grounded simulated inductance circuit using a single PFTFN , 2009 .

[13]  Shahram Minaei,et al.  Cmos First-Order Current-Mode All-Pass filter with Electronic Tuning Capability and its Applications , 2013, J. Circuits Syst. Comput..

[14]  Oguzhan Cicekoglu,et al.  High Performance Wideband CMOS CCI and its Application in Inductance Simulator Design , 2012 .

[15]  Fırat Kaçar,et al.  Lossless grounded inductance simulator employing single VDBA and its experimental band-pass filter application , 2014 .

[16]  P.V.A. Mohan.  Grounded capacitor based grounded and floating inductance simulation using current conveyors , 1998 .

[17]  Shahram Minaei,et al.  A low power current controllable single-input three-output current-mode filter using MOS transistors only , 2014 .

[18]  Shahram Minaei,et al.  A Modified CFOA and Its Applications to Simulated Inductors, Capacitance Multipliers, and Analog Filters , 2008, IEEE Transactions on Circuits and Systems I: Regular Papers.

[19]  Mehmet Oguzhan Cicekoglu.  Active simulation of grounded inductors with CCII+s and grounded passive elements , 1998 .

[20]  Shahram Minaei,et al.  Lossy / lossless floating / grounded inductance simulation using one DDCC , 2012 .

[21]  Bilgin Metin,et al.  Canonical inductor simulators with grounded capacitors using DCCII , 2012 .

[22]  Shahram Minaei,et al.  A Novel Grounded Inductor Realization Using a Minimum Number of Active and Passive Components , 2005 .

[23]  Alain Fabre,et al.  On the frequency limitations of the circuits based on second generation current conveyors , 1995 .

[24]  Giuseppe Ferri,et al.  CCII-based floating inductance simulator with compensated series resistance , 2003 .

[25]  Erkan Yuce,et al.  Floating inductance, FDNR and capacitance simulation circuit employing only grounded passive elements , 2006 .

[26]  Raj Senani,et al.  New canonic lossy inductor using a single CDBA and its application , 2016 .

[27]  Hakan Kuntman,et al.  CFOA-Based Lossless and Lossy Inductance Simulators , 2011 .

[28]  Firat Kaçar,et al.  Novel grounded parallel inductance simulators realization using a minimum number of active and passive components , 2010, Microelectron. J..

[29]  Shahram Minaei,et al.  DXCCII-based grounded inductance simulators and filter applications , 2011, Microelectron. J..

[30]  Sajal K. Paul,et al.  New Topologies of Lossless Grounded Inductor Using OTRA , 2011, J. Electr. Comput. Eng..

[31]  Erkan Yuce,et al.  Modified DVCC based quadrature oscillator and lossless grounded inductor simulator using grounded capacitor(s) , 2017 .

[32]  D. Patranabis,et al.  Active simulation of grounded inductors using a single current conveyor , 1981 .

[33]  Shahram Minaei,et al.  Grounded Capacitance Multipliers based on Active Elements , 2017 .