High performance current regulator for a field-oriented controlled induction motor drive

A novel strategy of current regulation of a field-oriented controlled induction motor using a gate turn-off thyristor (GTO) inverter is proposed which is based on multivariable state feedback control with an integrator. The controller is designed by the pole placement technique of multivariable system regulation theory. Feedforward control is included in the control laws to improve transient responses. For the full state feedback control, the rotor flux is estimated with a reduced-order state observer. A good steady-state performance is obtained by means of an integral compensation, and fast transient response is also feasible since the required voltage is directly calculated from the feedforward control. Space voltage vector pulse width modulation is adopted as a switching strategy. A variable modulation scheme is presented which is changed from three-phase to two-phase modulation in the high modulation range, which gives lower current ripple over the whole operating range.<<ETX>>

[1]  John Van De Vegte,et al.  Feedback control systems , 1986 .

[2]  Yoichi Hori,et al.  Control Theoretical Considerations Relating to an Induction Machine Flux Observer , 1986 .

[3]  Kenzo Kamiyama,et al.  A Microprocessor-Controlled High-Accuracy Wide-Range Speed Regulator for Motor Drives , 1982, IEEE Transactions on Industrial Electronics.

[4]  A. Kawamura,et al.  Digital current regulation of field oriented controlled induction motor based on predictive flux observer , 1990, Conference Record of the 1990 IEEE Industry Applications Society Annual Meeting.

[5]  Richard L. Brunson,et al.  Linear Control System Analysis and Design , 1988, IEEE Transactions on Systems, Man, and Cybernetics.

[6]  E. Davison,et al.  Design of industrial regulators. Integral feedback and feedforward control , 1972 .

[7]  Robert D. Lorenz,et al.  Performance of Feedforward Current Regulators for Field-Oriented Induction Machine Controllers , 1987, IEEE Transactions on Industry Applications.

[8]  Hiroshi Nagase,et al.  High-Performance Induction Motor Drive System Using a PWM Inverter , 1984, IEEE Transactions on Industry Applications.

[9]  H. van der Broeck,et al.  Analysis and Realization of a Pulse Width Modulator Based on Voltage Space Vectors , 1986, 1986 Annual Meeting Industry Applications Society.

[10]  J. Kolar,et al.  Minimizing the current harmonics RMS value of three-phase PWM converter systems by optimal and suboptimal transition between continuous and discontinuous modulation , 1991, PESC '91 Record 22nd Annual IEEE Power Electronics Specialists Conference.

[11]  V.J. Gosbell,et al.  A study of induction motor current control using the complex number representation , 1989, Conference Record of the IEEE Industry Applications Society Annual Meeting,.

[12]  A. K. Chattopadhyay,et al.  Microprocessor implementation of a state feedback control strategy for a current source inverter-fed induction motor drive , 1989 .

[13]  A. F. Wick,et al.  Design and Experimental Results of a Brushless AC Servo Drive , 1984, IEEE Transactions on Industry Applications.

[14]  Seung-Ki Sul,et al.  Novel Current Regulation for a field-Oriented Controlled Induction Motor Drive , 1992 .

[15]  Russel J. Kerkman,et al.  A New Synchronous Current Regulator and an Analysis of Current-Regulated PWM Inverters , 1986, IEEE Transactions on Industry Applications.

[16]  Bimal K. Bose Recent advances in power electronics , 1992 .

[17]  A. Nabae,et al.  A novel PWM scheme of voltage source inverters based on space vector theory , 1990 .

[18]  Donald W. Novotny,et al.  Current Control of VSI-PWM Inverters , 1985, IEEE Transactions on Industry Applications.

[19]  Hirofumi Akagi,et al.  A Novel Control Scheme for Current-Controlled PWM Inverters , 1986, IEEE Transactions on Industry Applications.

[20]  Gene F. Franklin,et al.  Feedback Control of Dynamic Systems , 1986 .