Noise Reduction Design for Flap Side-edges toward FQUROH Second Flight Demonstration

[1]  Ryotaro Sakai,et al.  Further Noise Reduction Design for Landing Gear toward FQUROH Second Flight Demonstration , 2018, 2018 AIAA/CEAS Aeroacoustics Conference.

[2]  Ryotaro Sakai,et al.  FQUROH: A Flight Demonstration Project for Airframe Noise Reduction Technology – the 2nd Flight Demonstration , 2017, 2018 AIAA/CEAS Aeroacoustics Conference.

[3]  Yasushi Ito,et al.  Acoustic Wind Tunnel Test with 18% Scale Half-span Model toward FQUROH Second Flight Demonstration , 2017, 2018 AIAA/CEAS Aeroacoustics Conference.

[4]  Kazuomi Yamamoto,et al.  Airframe Noise Reduction of Flap Side-edge Using Vortex Generators , 2017 .

[5]  Kazuomi Yamamoto,et al.  Noise Reduction Design for Landing Gear toward FQUROH Flight Demonstration , 2017 .

[6]  Ryotaro Sakai,et al.  Flyover Array Measurements with JAXA Flying Test Bed ‘Hisho’ , 2016 .

[7]  Kazuomi Yamamoto,et al.  Study on Change of Noise Generation from Slat Track Shape , 2016 .

[8]  Mehdi R. Khorrami,et al.  Computational Evaluation of Airframe Noise Reduction Concepts at Full Scale , 2016 .

[9]  Mehdi R. Khorrami,et al.  Simulation-Based Airframe Noise Prediction of a Full-Scale, Full Aircraft , 2016 .

[10]  Mehdi R. Khorrami,et al.  Airframe Noise Prediction of a Full Aircraft in Model and Full Scale Using a Lattice Boltzmann Approach , 2016 .

[11]  Kazuomi Yamamoto,et al.  FQUROH: a Flight Demonstration Project for Airframe Noise Reduction Technology - Concept and Current Status , 2016 .

[12]  Kazuomi Yamamoto,et al.  Japan Aerospace Exploration Agency Studies for the Second High-Lift Prediction Workshop , 2015 .

[13]  Kazuomi Yamamoto,et al.  Study on Noise Generation from Slat Tracks Using a High-Lift Wing Model , 2015 .

[14]  E. Fares,et al.  Evaluation of Airframe Noise Reduction Concepts via Simulations Using a Lattice Boltzmann Approach , 2015 .

[15]  William M. Humphreys,et al.  An Assessment of Flap and Main Landing Gear Noise Abatement Concepts , 2015 .

[16]  Kazuomi Yamamoto,et al.  Experimental Study of Slat Noise from 30P30N Three-Element High-Lift Airfoil in JAXA Hard-Wall Low-Speed Wind Tunnel , 2014 .

[17]  Shigemi Shindo,et al.  Noise Generation Characteristics of a High-lift Swept and Tapered Wing Model , 2013 .

[18]  Kazuomi Yamamoto,et al.  An Aerodynamic Noise Reduction Study for Airframe Noise from Flap Tips , 2013 .

[19]  Kazuomi Yamamoto,et al.  Numerical Investigation on Change of Airframe Noise by Flap Side-edge Shape , 2013 .

[20]  Kazuomi Yamamoto,et al.  Numerical Simulation of a Two-Wheel Main Landing Gear with Low-Noise Fairings around Tire-Axle Region , 2012 .

[21]  Long Wu,et al.  Computational and Experimental Study on Noise Generation from Tire-Axle Regions of a Two-Wheel Main Landing Gear , 2011 .

[22]  Kazuomi Yamamoto,et al.  Experimental study on Noise Generation of a Two-Wheel Main Landing Gear , 2010 .

[23]  T. Imamura,et al.  A Far-field Noise and Near-field Unsteadiness of a Simplified High-lift-configuration Model (Flap-edge) , 2009 .

[24]  Kazuomi Yamamoto,et al.  Studies on Airframe Noise Generation at High-lift Devices in Relation to Aerodynamic Performances , 2008 .

[25]  Kazuomi Yamamoto,et al.  Designing of Slat Cove Filler as a Noise Reduction Device for Leading-edge Slat , 2007 .

[26]  K. Nakahashi,et al.  Numerical Simulations on Separation of Scaled Supersonic Experimental Airplane from Rocket Booster at Supersonic Speed , 2002 .

[27]  Tatsuo Maeda,et al.  RTRI's Large-scale Low-noise Wind Tunnel and Wind Tunnel Tests , 2001 .