Analytical capabilities of the selectively modulated interferometric dispersive spectrometer
暂无分享，去创建一个
[1] T. L. Chester,et al. Throughput advantage and disadvantage in analytical ultraviolet-visible spectrometry by considerations of signal and noise spectral bandpasses , 1977 .
[2] N. M. Larson,et al. Characteristic noise spectra of some common analytical spectrometric sources , 1976 .
[3] D. J. Johnson,et al. A comparison of signal-to-noise ratios for single channel methods (sequential and multiplex) vs multichannel methods in optical spectroscopy☆ , 1976 .
[4] D. J. Johnson,et al. Multielement analysis via computer-controlled rapid-scan atomic fluorescence spectrometer with a continuum source , 1975 .
[5] D. G. Mitchell,et al. Simultaneous Determination of Trace Wear Metals in Used Lubricating Oils by Atomic Absorption Spectrometry Using a Silicon-Target Vidicon Detector , 1974 .
[6] G. Christian,et al. A Comparison Study of Detection Limits Using Flame-Emission Spectroscopy with the Nitrous Oxide—Acetylene Flame and Atomic-Absorption Spectroscopy , 1971 .
[7] Tatsuro Suzuki,et al. New Type Interference Selective Modulation Spectroscopy , 1971, Applied optics.
[8] S. R. Koirtyohann,et al. The nitrous oxide-acetylene flame in emission analysis—II: Lithium and the alkaline earths , 1968 .
[9] S. R. Koirtyohann,et al. The nitrous oxide-acetylene flame in emission analysis—I. General characteristics , 1968 .
[10] J. Connes. Domaine d'utilisation de la méthode par transformée de Fourier , 1958 .