3D-Printed Modular Microfluidic Device Enabling Preconcentrating Bacteria and Purifying Bacterial DNA in Blood for Improving the Sensitivity of Molecular Diagnostics

Molecular diagnostics for sepsis is still a challenge due to the presence of compounds that interfere with gene amplification and bacteria at concentrations lower than the limit of detection (LOD). Here, we report on the development of a 3D printed modular microfluidic device (3DpmμFD) that preconcentrates bacteria of interest in whole blood and purifies their genomic DNA (gDNA). It is composed of a W-shaped microchannel and a conical microchamber. Bacteria of interest are magnetically captured from blood in the device with antibody conjugated magnetic nanoparticles (Ab-MNPs) at 5 mL/min in the W-shaped microchannel, while purified gDNA of the preconcentrated bacteria is obtained with magnetic silica beads (MSBs) at 2 mL/min in the conical microchamber. The conical microchamber was designed to be connected to the microchannel after the capturing process using a 3D-printed rotary valve to minimize the exposure of the MSBs to interfering compounds in blood. The pretreatment process of spiked blood (2.5 mL) can be effectively completed within about 50 min. With the 3DpmμFD, the LOD for the target microorganism Escherichia coli O157:H7 measured by both polymerase chain reaction (PCR) with electrophoresis and quantitative PCR was 10 colony forming unit (CFU) per mL of whole blood. The results suggest that our method lowers the LOD of molecular diagnostics for pathogens in blood by providing bacterial gDNA at high purity and concentration.

[1]  É. Oswald,et al.  Intimin Gene (eae) Subtype-Based Real-Time PCR Strategy for Specific Detection of Shiga Toxin-Producing Escherichia coli Serotypes O157:H7, O26:H11, O103:H2, O111:H8, and O145:H28 in Cattle Feces , 2013, Applied and Environmental Microbiology.

[2]  G. Sayler,et al.  The extraction and purification of microbial DNA from sediments , 1987 .

[3]  David T. Huang,et al.  Severe sepsis and septic shock: review of the literature and emergency department management guidelines. , 2006, Annals of emergency medicine.

[4]  Hongkai Wu,et al.  Direct, one-step molding of 3D-printed structures for convenient fabrication of truly 3D PDMS microfluidic chips , 2015 .

[5]  Jonathan Cohen.  The immunopathogenesis of sepsis , 2002, Nature.

[6]  Richard A Robison,et al.  Rapid separation of bacteria from blood—review and outlook , 2016, Biotechnology progress.

[7]  Chengpeng Chen,et al.  3D-printed Microfluidic Devices: Fabrication, Advantages and Limitations-a Mini Review. , 2016, Analytical methods : advancing methods and applications.

[8]  M. Kermekchiev,et al.  Direct DNA amplification from crude clinical samples using a PCR enhancer cocktail and novel mutants of Taq. , 2010, The Journal of molecular diagnostics : JMD.

[9]  G. Jung,et al.  3D-Printed Microfluidic Device for the Detection of Pathogenic Bacteria Using Size-based Separation in Helical Channel with Trapezoid Cross-Section , 2015, Scientific Reports.

[10]  Samuel Yang,et al.  PCR-based diagnostics for infectious diseases: uses, limitations, and future applications in acute-care settings , 2004, The Lancet Infectious Diseases.

[11]  W. Al-Soud,et al.  Purification and Characterization of PCR-Inhibitory Components in Blood Cells , 2001, Journal of Clinical Microbiology.

[12]  Gilbert GREUB,et al.  Microbial diagnosis of bloodstream infection: towards molecular diagnosis directly from blood. , 2015, Clinical microbiology and infection : the official publication of the European Society of Clinical Microbiology and Infectious Diseases.

[13]  C. Bruggeman,et al.  Evaluation of New Preanalysis Sample Treatment Tools and DNA Isolation Protocols To Improve Bacterial Pathogen Detection in Whole Blood , 2009, Journal of Clinical Microbiology.

[14]  M. Hamilton,et al.  How to optimize the drop plate method for enumerating bacteria. , 2001, Journal of microbiological methods.

[15]  T. van der Poll,et al.  Severe sepsis and septic shock. , 2013, The New England journal of medicine.

[16]  J. Takeda,et al.  The role of a real-time PCR technology for rapid detection and identification of bacterial and fungal pathogens in whole-blood samples , 2011, Journal of infection and chemotherapy : official journal of the Japan Society of Chemotherapy.

[17]  Thomas Emrich,et al.  A multiplex real-time PCR assay for rapid detection and differentiation of 25 bacterial and fungal pathogens from whole blood samples , 2008, Medical Microbiology and Immunology.

[18]  S. Berensmeier.  Magnetic particles for the separation and purification of nucleic acids , 2006, Applied Microbiology and Biotechnology.

[19]  A. Götherström,et al.  Fishing for ancient DNA. , 2008, Forensic science international. Genetics.

[20]  Chao Huang,et al.  A Microfluidic Platform for Precision Small-volume Sample Processing and Its Use to Size Separate Biological Particles with an Acoustic Microdevice , 2015, Journal of visualized experiments : JoVE.

[21]  A. Metspalu,et al.  Comparison of DNA extraction methods for multiplex polymerase chain reaction. , 2010, Analytical Biochemistry.

[22]  Jinkee Lee,et al.  3D-printed microfluidic magnetic preconcentrator for the detection of bacterial pathogen using an ATP luminometer and antibody-conjugated magnetic nanoparticles. , 2017, Journal of microbiological methods.

[23]  R. Bellomo,et al.  The Third International Consensus Definitions for Sepsis and Septic Shock (Sepsis-3). , 2016, JAMA.

[24]  Andre Sharon,et al.  Rapid Microbial Sample Preparation from Blood Using a Novel Concentration Device , 2015, PloS one.

[25]  Jinyeop Lee,et al.  A 3D-Printed Millifluidic Platform Enabling Bacterial Preconcentration and DNA Purification for Molecular Detection of Pathogens in Blood , 2018, Micromachines.