Employment of Artificial Magnetic Metamaterials to Effectively Reduce the Back-Lobe of Patch Antennas

Abstract In this article, we present the employment of a proper set of artificial magnetic inclusions to dramatically reduce the back-lobe of patch antennas. The layout consists of a regular microstrip antenna surrounded by split-ring resonators (SRRs). These artificial magnetic inclusions are designed in order to resonate at the antenna operating frequency so that the surface waves are blocked and the front-to-back ratio of the antenna is increased. A numerical investigation of the near-zone magnetic field is conducted in order to propose a suitable arrangement of the SRRs around the antenna, aimed to obtain an effective 2D-isotropic suppression of the surface waves. Since inclusions located at the periphery of the structure resonate at a higher frequency, multiple split-ring resonators (MSRRs) are also used in order to reduce the resonant frequency of the peripheral inclusions. Finally, full-wave numerical simulations confirming the effectiveness of the proposed design and showing how the resonating artificial magnetic inclusions surrounding the antenna effectively suppress the back-lobe are presented.

[1]  M. Kafesaki,et al.  Investigation of magnetic resonances for different split-ring resonator parameters and designs , 2005 .

[2]  Francisco Medina,et al.  Role of bianisotropy in negative permeability and left-handed metamaterials , 2002 .

[3]  A. Toscano,et al.  Equivalent-Circuit Models for the Design of Metamaterials Based on Artificial Magnetic Inclusions , 2007, IEEE Transactions on Microwave Theory and Techniques.

[4]  Jianming Jin,et al.  A hybrid finite element method for scattering and radiation by microstrip path antennas and arrays residing in a cavity , 1991 .

[5]  Z. Sipus,et al.  Waveguide miniaturization using uniaxial negative permeability metamaterial , 2005, IEEE Transactions on Antennas and Propagation.

[6]  K. Sarabandi,et al.  A substrate for small patch antennas providing tunable miniaturization factors , 2006, IEEE Transactions on Microwave Theory and Techniques.

[7]  N. Engheta,et al.  Subwavelength, Compact, Resonant Patch Antennas Loaded With Metamaterials , 2007, IEEE Transactions on Antennas and Propagation.

[8]  C. Simovski,et al.  HIGH-IMPEDANCE SURFACES BASED ON SELF-RESONANT GRIDS . ANALYTICAL MODELLING AND NUMERICAL SIMULATIONS , 2003 .

[9]  D. Sievenpiper,et al.  High-impedance electromagnetic surfaces with a forbidden frequency band , 1999 .

[10]  N. Engheta,et al.  Compact Microwave Absorbers Utilizing Single Negative Metamaterial Layers , 2006 .

[11]  Sergei A. Tretyakov,et al.  Antenna miniaturization using magneto-dielectric substrates: Physical limitations and desired features for the substrate , 2006 .

[12]  GHz magnetic response of split ring resonators , 2004 .

[13]  F. Medina,et al.  Comparative analysis of edge- and broadside- coupled split ring resonators for metamaterial design - theory and experiments , 2003 .

[14]  A. Toscano,et al.  Design of Spiral and Multiple Split-Ring Resonators for the Realization of Miniaturized Metamaterial Samples , 2007, IEEE Transactions on Antennas and Propagation.

[15]  L. Kempel,et al.  Patch antennas on ferromagnetic substrates , 1997, IEEE Antennas and Propagation Society International Symposium 1997. Digest.

[16]  F. Medina,et al.  Left-handed-media simulation and transmission of EM waves in subwavelength split-ring-resonator-loaded metallic waveguides. , 2002, Physical review letters.

[17]  J. Pendry,et al.  Magnetism from conductors and enhanced nonlinear phenomena , 1999 .