A guidance method for the motion of mechanisms with flexible parts

Abstract A new method is introduced for guiding the motion of mechanisms with flexible parts. Compared to closed-loop control methods, it enables simplicity in the design of the mechanism and thus reduced cost and complexity. The method can be easily implemented even on existing mechanisms, requiring minimal computational cost and knowledge of their dynamic parameters and it is easily adjustable, leading to guidance functions properly adapted to the specific flexible part requirements.

[1]  Andrew A. Goldenberg,et al.  Feedforward control of a single-link flexible robot☆ , 1986 .

[2]  Kang G. Shin,et al.  Open-loop minimum-time control of mechanical manipulators and its application , 1984 .

[3]  Sudarshan P. Bhat,et al.  Experiments on Point-to-Point Position Control of a Flexible Beam Using Laplace Transform Technique: Part I—Open-Loop , 1991 .

[4]  G. R. Heppler,et al.  Shaped Input Control of a System With Multiple Modes , 1993 .

[5]  Warren P. Seering,et al.  Preshaping Command Inputs to Reduce System Vibration , 1990 .

[6]  Y. Stepanenko.  Modal Control of Fast Large-Scale Robot Motions , 1987 .

[7]  Mark J. Balas,et al.  Application of Model Reference Adaptive Control to a Flexible Remote Manipulator Arm , 1986, 1986 American Control Conference.

[8]  R. L. Farrenkopf.  Optimal Open-Loop Maneuver Profiles for Flexible Spacecraft , 1979 .

[9]  A. Kanarachos,et al.  Spline-based guidance with enhanced frequency robustness for the motion of flexible part handling manipulators , 1996 .

[10]  Naresh K. Sinha,et al.  Adaptive control of an industrial robot , 1986, Robotica.

[11]  G. R. Eisler,et al.  Approximate optimal trajectories for flexible-link manipulator slewing using recursive quadratic programming , 1993 .

[12]  H. Tokumaru,et al.  Inverse Dynamics of Flexible Robot Arms: Modeling and Computation for Trajectory Control , 1990 .

[13]  Bor-Sen Chen,et al.  Robust Optimal Model Matching Control Design for Flexible Manipulators , 1993 .

[14]  Sahjendra N. Singh,et al.  Robust Trajectory Following Control of Robotic Systems , 1985 .

[15]  C. W. deSilva,et al.  Least Squares Adaptive Control for Trajectory Following Robots , 1987 .

[16]  Ichiro Yamada,et al.  Neural-Network Based Learning Control of Flexible Mechanism With Application to a Single-Link Flexible Arm , 1994 .

[17]  Otto J. M. Smith,et al.  Feedback control systems , 1958 .

[18]  P. Vionis,et al.  A Splines-Based Control Method for Robot Manipulators , 1989, Robotica.

[19]  R. Nadira,et al.  Control of lightweight flexible manipulators: A feasibility study , 1984 .

[20]  Warren P. Seering,et al.  Reducing residual vibration in systems with time-varying resonances , 1987, Proceedings. 1987 IEEE International Conference on Robotics and Automation.

[21]  A. Galip Ulsoy,et al.  Dynamic Simulation of a Leadscrew Driven Flexible Robot Arm and Controller , 1986 .

[22]  H. Harry Asada,et al.  The Design of Open-Loop Manipulator Arms With Decoupled and Configuration-Invariant Inertia Tensors , 1987 .