Enhanced Performance of Polymer Solar Cells Comprising Diketopyrrolopyrrole-Based Regular Terpolymer Bearing Two Different π-Extended Donor Units.

New regular and random diketopyrrolopyrrole (DPP)-based terpolymers (i.e., Reg-PBDPPT and Ran-PBDPPT, respectively) bearing DPP as an electron deficient unit and 2,2'-bithiophene and (E)-1,2-di(thiophen-2-yl)ethene as electron donating units were designed and synthesized, and their performance in photovoltaic cells was investigated precisely. The absorption properties and highest occupied molecular orbital (HOMO) of Reg-PBDPPT were found to be different from those of Ran-PBDPPT. The results of grazing incidence X-ray diffraction experiments revealed that Ran-PBDPPT typically had a predominantly edge-on chain orientation on the substrate, whereas Reg-PBDPPT showed mixed chain orientation both in pristine and thermally annealed films. Although Reg-PBDPPT exhibited a lower degree of edge-on chain orientation on the substrate, the corresponding TFTs showed a high hole mobility of 0.42-0.96 cm(2) V(-1) s(-1) and maintained a high current on/off ratio (>10(6)). A polymer solar cell (PSC) composed of Reg-PBDPPT and PC71BM exhibited power conversion efficiencies (PCE) of 5.24-5.45%, which were higher than those of the Ran-PBDPPT-based PSCs. The enhanced efficiency was supported by an increase in the short circuit current, which is strongly related to the unique internal crystalline morphology and pronounced nanophase segregation behavior in the blend films. These results obviously manifested that this synthetic strategy for regular conjugated terpolymers could be employed to control morphological properties to obtain high-performance PSCs.

[1]  Dae Hee Lee,et al.  Tunable light harvesting properties of a highly crystalline alternating terpolymer for high-performing solar cells , 2015 .

[2]  Xuedong Wang,et al.  High performance quinacridone-based polymers in film transistors and photovoltaics: Effects of vinylene linkage on crystallinity and morphology , 2015 .

[3]  S. Jenekhe,et al.  n-Type semiconducting naphthalene diimide-perylene diimide copolymers: controlling crystallinity, blend morphology, and compatibility toward high-performance all-polymer solar cells. , 2015, Journal of the American Chemical Society.

[4]  Weiwei Li,et al.  A regioregular terpolymer comprising two electron-deficient and one electron-rich unit for ultra small band gap solar cells. , 2015, Chemical communications.

[5]  Dae Hee Lee,et al.  Bis(thienothiophenyl) diketopyrrolopyrrole-based conjugated polymers with various branched alkyl side chains and their applications in thin-film transistors and polymer solar cells. , 2015, ACS applied materials & interfaces.

[6]  Bumjoon J. Kim,et al.  Determining Optimal Crystallinity of Diketopyrrolopyrrole-Based Terpolymers for Highly Efficient Polymer Solar Cells and Transistors , 2014 .

[7]  P. Müller‐Buschbaum.  The Active Layer Morphology of Organic Solar Cells Probed with Grazing Incidence Scattering Techniques , 2014, Advanced materials.

[8]  R. Janssen,et al.  Comparing random and regular diketopyrrolopyrrole–bithiophene–thienopyrrolodione terpolymers for organic photovoltaics , 2014 .

[9]  Bumjoon J. Kim,et al.  Design of terpolymers as electron donors for highly efficient polymer solar cells , 2014 .

[10]  Songting Tan,et al.  Improved photovoltaic properties of terpolymers containing diketopyrrolopyrrole and an isoindigo side chain , 2014 .

[11]  A. Facchetti,et al.  Chain-growth polycondensation of perylene diimide-based copolymers: a new route to regio-regular perylene diimide-based acceptors for all-polymer solar cells and n-type transistors , 2014 .

[12]  B. Collins,et al.  The role of regioregularity, crystallinity, and chain orientation on electron transport in a high-mobility n-type copolymer. , 2014, Journal of the American Chemical Society.

[13]  J. Qin,et al.  Effect of the Longer β-Unsubstituted Oliogothiophene Unit (6T and 7T) on the Organic Thin-Film Transistor Performances of Diketopyrrolopyrrole-Oliogothiophene Copolymers , 2013 .

[14]  T. Russell,et al.  Semi-crystalline random conjugated copolymers with panchromatic absorption for highly efficient polymer solar cells , 2013 .

[15]  Ergang Wang,et al.  An alternating D–A1–D–A2 copolymer containing two electron-deficient moieties for efficient polymer solar cells , 2013 .

[16]  Bumjoon J. Kim,et al.  Importance of Optimal Composition in Random Terpolymer-Based Polymer Solar Cells , 2013 .

[17]  M. Wienk,et al.  High-molecular-weight regular alternating diketopyrrolopyrrole-based terpolymers for efficient organic solar cells. , 2013, Angewandte Chemie.

[18]  Donghoon Choi,et al.  A high-mobility terselenophene and diketopyrrolopyrrole containing copolymer in solution-processed thin film transistors. , 2013, Chemical communications.

[19]  C. B. Nielsen,et al.  Recent Advances in the Development of Semiconducting DPP‐Containing Polymers for Transistor Applications , 2013, Advanced materials.

[20]  A. Facchetti,et al.  Aggregation in a high-mobility n-type low-bandgap copolymer with implications on semicrystalline morphology. , 2012, Journal of the American Chemical Society.

[21]  Gui Yu,et al.  Highly π‐Extended Copolymers with Diketopyrrolopyrrole Moieties for High‐Performance Field‐Effect Transistors , 2012, Advanced materials.

[22]  C. B. Nielsen,et al.  Recent advances in high mobility donor-acceptor semiconducting polymers , 2012 .

[23]  O. Inganäs,et al.  An easily accessible isoindigo-based polymer for high-performance polymer solar cells. , 2011, Journal of the American Chemical Society.

[24]  Donghoon Choi,et al.  2,5-Bis(2-octyldodecyl)pyrrolo[3,4-c]pyrrole-1,4-(2H,5H)-dione-based donor-acceptor alternating copolymer bearing 5,5'-di(thiophen-2-yl)-2,2'-biselenophene exhibiting 1.5 cm2·V(-1)·s(-1) hole mobility in thin-film transistors. , 2011, Journal of the American Chemical Society.

[25]  Shinuk Cho,et al.  Poly(diketopyrrolopyrrole‐benzothiadiazole) with Ambipolarity Approaching 100% Equivalency , 2011 .

[26]  Antonio Facchetti,et al.  π-Conjugated Polymers for Organic Electronics and Photovoltaic Cell Applications† , 2011 .

[27]  D. D. de Leeuw,et al.  Poly(diketopyrrolopyrrole-terthiophene) for ambipolar logic and photovoltaics. , 2009, Journal of the American Chemical Society.

[28]  S. Beaupré,et al.  Highly efficient organic solar cells based on a poly(2,7-carbazole) derivative , 2009 .

[29]  Yutaka Ito,et al.  Crystalline ultrasmooth self-assembled monolayers of alkylsilanes for organic field-effect transistors. , 2009, Journal of the American Chemical Society.

[30]  Hoosung Lee,et al.  Efficient poly(p-phenylenevinylene) derivative with 1,2-diphenyl-2'-cyanoethene for single layer light-emitting diodes , 2003 .

[31]  E. Lavernia,et al.  On the applicability of the x-ray diffraction line profile analysis in extracting grain size and microstrain in nanocrystalline materials , 1999 .