Increasing SDR Receiver Dynamic Range by ADC Diversity

Nowadays, most radio implementations are based on software-defined radio (SDR) technologies. The capabilities of digital signal processing enable new applications like low power wide area networks (LPWAN), which are expected to play a decisive role in the upcoming Internet of Things. Centralized gateways, usually realized in an SDR architecture, are used to connect many thousands of objects to the internet. Due to the high variance of the received signal level, a high dynamic range is required for the SDR receiver front-end. In current receiver architectures, the dynamic range is mainly limited by the analog-to-digital converter (ADC). Several techniques have been proposed to extend the dynamic range by stacking multiple ADCs and driving them with different gain factors. Correlation of quantization noise was identified as key parameter to determine the dynamic range enhancement. This paper compares the proposed techniques and extends existing analysis tools for the use of arbitrary gain factors. Additionally, the influence of further noise sources like thermal noise and jitter are taken into account. The theoretical considerations are supported by simulations and measurements using a real LPWAN SDR implementation.

[1]  Jörg Robert,et al.  Increasing Transmission Reliability for Telemetry Systems Using Telegram Splitting , 2015, IEEE Transactions on Communications.

[2]  Eric A. Vittoz,et al.  Future of analog in the VLSI environment , 1990, IEEE International Symposium on Circuits and Systems.

[3]  P. W. Wong.  Quantization noise, fixed-point multiplicative roundoff noise, and dithering , 1990, IEEE Trans. Acoust. Speech Signal Process..

[4]  Minh-Tien Do.  Ultra-narrowband wireless sensor networks modeling and optimization. (Modélisation d'un réseau sans fils en bande ultra étroite et optimisation du protocole de communication) , 2015 .

[5]  Gerald Ulbricht.  Experimental investigations on a stacked analog-to-digital converter configuration for a high dynamic range HF receiver , 2015, 2015 German Microwave Conference.

[6]  Martin Peckerar,et al.  Impact of Decorrelation Techniques on Sampling Noise in Radio-Frequency Applications , 2010, IEEE Transactions on Instrumentation and Measurement.

[7]  Yu Lin,et al.  An 11b Pipeline ADC With Parallel-Sampling Technique for Converting Multi-Carrier Signals , 2012, IEEE Transactions on Circuits and Systems I: Regular Papers.

[8]  Bernard Widrow,et al.  Quantization Noise: Roundoff Error in Digital Computation, Signal Processing, Control, and Communications , 2008 .

[9]  H.T. Friis,et al.  Noise Figures of Radio Receivers , 1944, Proceedings of the IRE.

[10]  Y. Akazawa,et al.  Jitter analysis of high-speed sampling systems , 1990 .

[11]  George J. Miao.  Signal processing in digital communications , 2006 .

[12]  Y.S. Poberezhskiy.  On Dynamic Range of Digital Receivers , 2007, 2007 IEEE Aerospace Conference.

[13]  Ying Chen,et al.  Quantization Noise Mitigation via Parallel ADCs , 2014, IEEE Signal Processing Letters.

[14]  Dong Chao,et al.  Universal Software Radio Peripheral , 2010 .

[15]  Robert H. Walden,et al.  Analog-to-digital converter survey and analysis , 1999, IEEE J. Sel. Areas Commun..

[16]  John G. Proakis,et al.  Digital Signal Processing: Principles, Algorithms, and Applications , 1992 .

[17]  E. Seifert,et al.  Enhancing the dynamic range of analog-to-digital converters by reducing excess noise , 1989, Conference Proceeding IEEE Pacific Rim Conference on Communications, Computers and Signal Processing.