The main aim of this research work is to develop and design a proto type model for a pick and place robotic vehicle with a soft catching gripper that can be controlled by android OS for remote operation. At the transmitting end using android application device, commands are sent to the receiver to control the movement of the robotic vehicle. Meanwhile at the receiving end four motors are interfaced to the microcontroller where two for them are used for arm movement while the other two are for the body movement. The android application device transmitter will acts as a remote control while the receiver end Bluetooth device is fed to the microcontroller to drive DC motors via motor driver IC for necessary work. Remote operation is achieved by any smart phone with Android OS; upon a GUI (Graphical User Interface) based touch screen operation. DOI: http://dx.doi.org/10.11591/telkomnika.v14i1.7370
[1]
Murtaza Hussain Shaikh,et al.
Automation of Mobile Pick and Place Robotic System for Small Food Industry
,
2012,
ArXiv.
[2]
Yu Sun,et al.
Autonomous Robotic Pick-and-Place of Microobjects
,
2010,
IEEE Transactions on Robotics.
[3]
Fadnavis Shubham.
A Design of GUI Based Wireless Robotic Car
,
2012
.
[5]
P Sathya Priya,et al.
SMART HOST MICROCONTROLLER BASED SOLAR POWERED TOOL WITH ROBOTIC ARM
,
2013
.
[6]
Xiao Xiao,et al.
The Wireless Remote Control Car System Based on ARM9
,
2011,
2011 First International Conference on Instrumentation, Measurement, Computer, Communication and Control.