Understanding High Recession Rates of Carbon Ablators Seen in Shear Tests in an Arc Jet

High rates of recession in arc jet shear test s of Phenolic Impregnated Carbon Ablator (PICA) inspired a series of tests and analysis on FiberForm (a carbon preform used in the fabrication of PICA). Arc jet tests were p erformed on FiberForm in both air and pure nitrogen for stagnation and shear configurations . The nitrogen tests showed little or no recession, while the air tests of FiberForm show ed recession rates similar to that of PICA (when adjusted for the difference in density). While mechanical erosion can not be ruled out, this is the first step in doing so. Anal ysis using a carbon oxidation boundary condition within DPLR was used to predict the recession rate of FiberForm. The analysis indicates that much of the anomalous recession behavior seen in shear tests may simply be an artifact of the non-flight like test conf iguration (copper upstream of the test article) a result of dis- similar enthalpy and oxygen concentration profiles on the copper. Shape change effects were also investigated and shown to be relatively small.

[1]  David M. Driver,et al.  Arc Jet Testing in a Shear Environment for Mars Science Laboratory Thermal Protection System , 2009 .

[2]  Deepak Bose,et al.  Computational Analysis of Arc-Jet Wedge Calibration Tests in IHF 6-Inch Conical Nozzle , 2009 .

[3]  Dean Kontinos,et al.  Post-Flight Evaluation of Stardust Sample Return Capsule Forebody Heatshield Material , 2008 .

[4]  Frank S. Milos,et al.  Ablation and Thermal Response Program for Spacecraft Heatshield Analysis , 1999 .

[5]  F. S. Milos,et al.  Analysis of Galileo Probe Heatshield Ablation and Temperature Data , 1999 .

[6]  F. S. Milos,et al.  Analysis of Galileo Probe Heat Shield Ablation and Temperature Data , 1997 .

[7]  Daniel J. Rasky,et al.  Phenolic Impregnated Carbon Ablators (PICA) as Thermal Protection Systems for Discovery Missions , 1997 .

[8]  E. P. Bartlett,et al.  An analysis of the coupled chemically reacting boundary layer and charring ablator. Part 4 - A unified approximation for mixture transport properties for multicomponent boundary-layer applications , 1968 .

[9]  C. B. Moyer,et al.  An analysis of the coupled chemically reacting boundary layer and charring ablator, part 1 Summary report , 1968 .

[10]  R. Kendall,et al.  Analytical and experimental study of ablation material for rocket engine application Final report , 1966 .

[11]  G. Candler,et al.  Data-Parallel Line Relaxation Method for the Navier -Stokes Equations , 1998 .

[12]  W. Winovich,et al.  The 60-MW Shuttle interaction heating facility , 1979 .