Beat-frequency adjustable Er3+-doped DBR fiber laser for ultrasound detection.

A compact low beat-frequency dual-polarization distributed Bragg reflector (DBR) fiber laser whose beat frequency can be varied, for high-frequency ultrasound detection has been proposed and experimentally demonstrated. The laser was fabricated in small birefringent commercial erbium-doped fiber. It operated in a robust single-longitude mode with output power of more than 1 mW and high signal-to-noise ratio better than 60 dB. Induced birefringence to the fiber during the UV inscription process is small (~10(-7)) and consequently the laser beats at a low frequency of ~20 MHz which is at least one order of magnitude smaller than previously reported results, making frequency down-conversion unnecessary. The beat frequency can be adjusted by controlling the side-exposure time of the UV light irradiating the gain cavity, providing a simple approach to multiplex a large number of DBR fiber lasers of different frequencies in series using frequency division multiplexing (FDM) technique. The proposed DBR fiber laser is also temperature insensitive, making it a good candidate for hydrophone applications.

[1]  D. C. Price,et al.  The characterization of high‐frequency ultrasonic fields using a polarimetric optical fiber sensor , 1989 .

[2]  David J. Webb,et al.  Fiber laser hydrophone array , 1999, Optics East.

[3]  Andreas Frank,et al.  Polarimetric fiber laser sensor for hydrostatic pressure. , 2004, Applied optics.

[4]  A. Kersey,et al.  Bragg grating-based laser sensors systems with interferometric interrogation and wavelength division multiplexing , 1995 .

[5]  J. Zayhowski,et al.  Limits imposed by spatial hole burning on the single-mode operation of standing-wave laser cavities. , 1990, Optics letters.

[6]  Junlin Qiu,et al.  Multiwavelength erbium-doped fiber lasers exploiting polarization hole burning , 2000 .

[7]  M. Marrone,et al.  Temperature dependence of stress birefringence in an elliptically clad fiber. , 1983, Optics letters.

[8]  Acoustically induced birefringence in optical fibers , 1982 .

[9]  J. T. Kringlebotn,et al.  Fiber distributed-feedback lasers used as acoustic sensors in air. , 1999, Applied optics.

[10]  M Ibsen,et al.  Polarimetric distributed feedback fiber laser sensor for simultaneous strain and temperature measurements. , 1999, Applied optics.

[11]  W. Loh,et al.  Single-sided output Sn/Er/Yb distributed feedback fiber laser , 1996 .

[12]  S. Rashleigh.  Origins and control of polarization effects in single-mode fibers (A) , 1982 .

[13]  G. Edvell,et al.  A 16 channel fibre laser sensor array , 2006, ACOFT/AOS 2006 - Australian Conference on Optical Fibre Technology/Australian Optical Society.

[14]  Hwa-Yaw Tam,et al.  Dual polarization fiber grating laser hydrophone. , 2009, Optics express.

[15]  Sailing He,et al.  High-Frequency Ultrasonic Hydrophone Based on a Cladding-Etched DBR Fiber Laser , 2008, IEEE Photonics Technology Letters.

[16]  J. T. Kringlebotn,et al.  Polarimetric Er(3+)-doped fiber distributed-feedback laser sensor for differential pressure and force measurements. , 1996, Optics letters.

[17]  G. Meltz,et al.  Polarimetric heterodyning Bragg-grating fiber-laser sensor. , 1993, Optics letters.

[18]  Bai-Ou Guan,et al.  Distributed bragg-reflector fiber-laser sensor for lateral force measurement , 2007, 2007 Asia Optical Fiber Communication and Optoelectronics Conference.

[19]  H. K. Kim,et al.  Polarimetric fiber laser sensors. , 1993, Optics letters.

[20]  H. Chan,et al.  Ultrasonic hydrophone based on distributed Bragg reflector fiber laser , 2005, IEEE Photonics Technology Letters.

[21]  Yi Jiang,et al.  Wavelength division multiplexing addressed four-element fiber optical laser hydrophone array. , 2007, Applied optics.