Mass ratio design based on compaction properties of backfill materials

The backfill-mining mass ratio is the ratio of the mass of the backfill materials in the goaf to the mass of the produced raw coal during solid backfill mining and it is regarded as a direct control index of the backfill effect in solid backfill mining. To design the backfill-mining mass ratio in a solid backfill mining panel, the backfill-mining mass ratio was defined on the basis of the basic principle of solid backfill mining. In addition, the density-stress relationship of backfill materials under compaction was obtained for five types of materials to derive a design formula for backfill-mining mass ratio. Moreover, the 6304-1 backfill panel under the large-scale dam of Ji'ning No. 3 coal mine was taken as an engineering case to design the backfill-mining mass ratio. In this way, it is found that the designed backfill-mining mass ratio is 1.22, while the mean value of the measured backfill-mining mass ratio is 1.245. Besides, the maximum roof subsidence is only 340 mm which effectively guarantees the backfill effect in the panel and control of strata movement and surface subsidence.

[1]  Qiang Zhang,et al.  BACKFILLING TECHNOLOGY OF SUBSTITUTING WASTE AND FLY ASH FOR COAL UNDERGROUND IN CHINA COAL MINING AREA , 2011 .

[2]  An Bai-fu,et al.  Strata Movement Control due to Bulk Factor of Backfilling Body in Fully Mechanized Backfilling Mining Face , 2012 .

[3]  Di Wu,et al.  Coupled effect of cement hydration and temperature on hydraulic behavior of cemented tailings backfill , 2015 .

[4]  Miao Xie-xing,et al.  Progress of fully mechanized mining with solid backfilling technology , 2012 .

[5]  Zhang Ji-xiong,et al.  Strata movement theory of dense backfill mining , 2012 .

[6]  Xiexing Miao,et al.  Overlying strata movement of recovering standing pillars with solid backfilling by physical simulation , 2016 .

[7]  Nan Zhou,et al.  Impact law of the bulk ratio of backfilling body to overlying strata movement in fully mechanized backfilling mining , 2011 .

[8]  Qiang Sun,et al.  Mining pressure monitoring and analysis in fully mechanized backfilling coal mining face-A case study in Zhai Zhen Coal Mine , 2015 .

[9]  Nan Zhou,et al.  Strata movement controlling effect of waste and fly ash backfillings in fully mechanized coal mining with backfilling face , 2011 .

[10]  Lei Wang,et al.  Quality control system framework for fully mechanized mining , 2013 .

[11]  Huang Yan-li,et al.  Deformation characteristic of key stratum overburden by raw waste backfilling with fully-mechanized coal minning technology , 2010 .

[12]  Qiang Zhang,et al.  Surface subsidence control theory and application to backfill coal mining technology , 2015, Environmental Earth Sciences.

[13]  Jixiong Zhang,et al.  SOLID MATERIAL MOTION LAW IN VERTICAL FEEDING SYSTEM WITHIN FULLY MECHANIZED COAL MINING AND BACKFILLING TECHNOLOGY , 2014 .

[14]  Meng Li,et al.  Mechanical analysis of roof stability under nonlinear compaction of solid backfill body , 2016 .

[15]  J. X. Zhang,et al.  Experimental investigation on compaction properties of solid backfill materials , 2014 .