Noise in Homodyne FMCW radar systems and its effects on ranging precision

In this paper, a closed-form expression for the ranging uncertainty of a primary frequency-modulated continuous-wave (FMCW) radar is introduced. In addition to basic system parameters also the phase noise profile of the transceiver serves as an input for this novel approach. On the signal processing side, phase noise range correlation effects are taken into account and an estimate for the ranging uncertainty is deduced. Thus, the influence of phase noise on the system performance in terms of precision can be directly predicted. For support of the theory, Monte-Carlo simulations were conducted. Measurement results acquired with a 77 GHz radar system are in good agreement with the theory.

[1]  D. Pozar.  Microwave Engineering , 1990 .

[2]  Barry G. Quinn,et al.  Estimation of frequency, amplitude, and phase from the DFT of a time series , 1997, IEEE Trans. Signal Process..

[3]  Dean Banerjee,et al.  Pll Performance, Simulation, and Design , 2003 .

[4]  Kristofer S. J. Pister,et al.  Burst Mode Two-Way Ranging with Cramer-Rao Bound Noise Performance , 2008, IEEE GLOBECOM 2008 - 2008 IEEE Global Telecommunications Conference.

[5]  M. Vossiek,et al.  The effect of phase noise on ranging uncertainty in FMCW secondary radar-based local positioning systems , 2012, 2012 9th European Radar Conference.

[6]  Andrew Gerald Stove,et al.  Linear FMCW radar techniques , 1992 .

[7]  Johanngeorg Otto.  Radar Applications in Level Measurement, Distance Measurement and Nondestructive Material Testing , 1997, 1997 27th European Microwave Conference.

[8]  M. C. Budge,et al.  Range correlation effects in radars , 1993, The Record of the 1993 IEEE National Radar Conference.