A comparison between bottom contact and top contact all organic field effect transistors assembled by soft lithography

Abstract All-organic Field Effect Transistors (FETs) on plastic were fabricated by means of an innovative, simple and inexpensive technique. A thin Mylar® foil acts both as substrate and gate dielectric. We used pentacene, deposited by thermal sublimation, as semiconducting layer while contacts were fabricated with poly(ethylene–dioxythiophene)/polystyrene sulfonate (PEDOT/PSS) by means of soft lithography. On the opposite side of the foil a thin PEDOT/PSS film, acting as gate electrode, was spin coated. It is worth noting that this technique allows the realization of bottom contact and top contact devices on the same substrate and with the same semiconducting layer. Furthermore, assisted by Scanning Probe Microscopy investigations, we investigated how the device structure influences its electrical properties in terms of hole mobility, Series Contact Resistance and parasitic capacitance effects. The comparison between top-contact and bottom-contact devices shows interesting marked differences that can be mainly attributed to a different quality of PEDOT/PSS-semiconductor interface. The flexibility of the obtained structure and the easy scalability of the technological process open the way for economic production of high-resolution organic devices.

[1]  Wolfgang Kowalsky,et al.  All-organic thin-film transistors patterned by means of selective electropolymerization , 2003 .

[2]  G. Horowitz,et al.  Extracting Parameters from the Current–Voltage Characteristics of Organic Field‐Effect Transistors , 2004 .

[3]  Tatsuya Shimoda,et al.  Inkjet printing of polymer thin film transistors , 2003 .

[4]  Annalisa Bonfiglio,et al.  Flexible, organic, ion-sensitive field-effect transistor , 2005 .

[5]  Piero Cosseddu,et al.  Tetracene light-emitting transistors on flexible plastic substrates , 2005 .

[6]  Piero Cosseddu,et al.  Soft lithography fabrication of all-organic bottom-contact and top-contact field effect transistors , 2006 .

[7]  R G Nuzzo.  The future of electronics manufacturing is revealed in the fine print , 2001, Proceedings of the National Academy of Sciences of the United States of America.

[8]  Annalisa Bonfiglio,et al.  A completely flexible organic transistor obtained by a one-mask photolithographic process , 2003 .

[9]  J. Rogers,et al.  Additive, nanoscale patterning of metal films with a stamp and a surface chemistry mediated transfer process: Applications in plastic electronics , 2002 .

[10]  C. Dimitrakopoulos,et al.  Organic Thin Film Transistors for Large Area Electronics , 2002 .

[11]  Feng Gao,et al.  Large area, high resolution, dry printing of conducting polymers for organic electronics , 2003 .

[12]  P. Calvert.  Inkjet Printing for Materials and Devices , 2001 .

[13]  J. Rogers,et al.  Elastomeric Transistor Stamps: Reversible Probing of Charge Transport in Organic Crystals , 2004, Science.

[14]  John A. Rogers,et al.  High‐Performance Contacts in Plastic Transistors and Logic Gates That Use Printed Electrodes of DNNSA‐PANI Doped with Single‐Walled Carbon Nanotubes , 2003 .